研究生: |
羅鈺洋 Yu-Yang Luo |
---|---|
論文名稱: |
基於電訊號與派克圓之三相感應馬達故障診斷與多重損壞分解 Fault Diagnosis and Multiple Faults Decomposition of Three-phase Induction Motor Based on Electrical Signals and Park’s Circle |
指導教授: |
劉孟昆
Meng-Kun Liu 藍振洋 Chen-Yang Lan |
口試委員: |
劉益宏
Yi-Hung Liu |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2022 |
畢業學年度: | 110 |
語文別: | 中文 |
論文頁數: | 128 |
中文關鍵詞: | 感應馬達 、電壓電流 、故障診斷 、機器學習 、派克圓 、多重損壞分析 、奇異值分解 |
外文關鍵詞: | induction motor, voltage and current, fault diagnosis, machine learning, Park’s circle, multiple fault analysis, singular value decomposition |
相關次數: | 點閱:266 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
[1] Kumar, S., Mukherjee, D., Guchhait, P. K., Banerjee, R., Srivastava, A. K., Vishwakarma, D. N., &
Saket, R. K. (2019). A comprehensive review of condition based prognostic maintenance (CBPM) for
induction motor. Ieee Access, 7, 90690-90704.
[2] Jung, J. H., Lee, J. J., & Kwon, B. H. (2006). Online diagnosis of induction motors using MCSA. IEEE
Transactions on Industrial Electronics, 53(6), 1842-1852.
[3] Niu, G., Son, J. D., Widodo, A., Yang, B. S., Hwang, D. H., & Kang, D. S. (2007). A comparison of
classifier performance for fault diagnosis of induction motor using multi-type signals. Structural Health
Monitoring, 6(3), 215-229.
[4] Glowacz, A., Glowacz, W., Glowacz, Z., & Kozik, J. (2018). Early fault diagnosis of bearing and stator
faults of the single-phase induction motor using acoustic signals. Measurement, 113, 1-9.
[5] Amanuel, T., Ghirmay, A., Ghebremeskel, H., Ghebrehiwet, R., & Bahlibi, W. (2021). Comparative
analysis of signal processing techniques for fault detection in three phase induction motor. Journal of
Electronics, 3(01), 61-76.
[6] Sotomayor, D., Arcos-Aviles, D., Castellanos, S., & Benitez, D. (2017, November). A computer-aided
test bench system for teaching and research on fault detection in three-phase induction motors. In 2017
IEEE 37th Central America and Panama Convention (CONCAPAN XXXVII) (pp. 1-6). IEEE.
[7] Shao, S., Yan, R., Lu, Y., Wang, P., & Gao, R. X. (2019). DCNN-based multi-signal induction motor
fault diagnosis. IEEE Transactions on Instrumentation and Measurement, 69(6), 2658-2669.
[8] Salazar-Villanueva, F., & Ibarra-Manzano, O. G. (2013, March). Spectral analysis for identifying faults
in induction motors by means of sound. In CONIELECOMP 2013, 23rd International Conference on
Electronics, Communications and Computing (pp. 149-153). IEEE.
[9] Ali, M. Z., Shabbir, M. N. S. K., Zaman, S. M. K., & Liang, X. (2020). Single-and multi-fault
diagnosis using machine learning for variable frequency drive-fed induction motors. IEEE Transactions
on Industry Applications, 56(3), 2324-2337.
[10] Contreras-Hernandez, J. L., Almanza-Ojeda, D. L., Ledesma-Orozco, S., Garcia-Perez, A., Romero-
Troncoso, R. J., & Ibarra-Manzano, M. A. (2019). Quaternion signal analysis algorithm for induction
motor fault detection. IEEE Transactions on Industrial Electronics, 66(11), 8843-8850.
[11] Nishat Toma, R., & Kim, J. M. (2020). Bearing fault classification of induction motors using discrete
wavelet transform and ensemble machine learning algorithms. Applied Sciences, 10(15), 5251.
[12] Kim, Y. H., Youn, Y. W., Hwang, D. H., Sun, J. H., & Kang, D. S. (2012). High-resolution parameter
estimation method to identify broken rotor bar faults in induction motors. IEEE Transactions on
Industrial Electronics, 60(9), 4103-4117.
[13] Gritli, Y., Di Tommaso, A. O., Miceli, R., Rossi, C., & Filippetti, F. (2013, October). Diagnosis of
mechanical unbalance for double cage induction motor load in time-varying conditions based on motor
vibration signature analysis. In 2013 International Conference on Renewable Energy Research and
Applications (ICRERA) (pp. 1157-1162). IEEE.
[14] Singh, S., & Kumar, N. (2016). Detection of bearing faults in mechanical systems using stator current
monitoring. IEEE Transactions on Industrial Informatics, 13(3), 1341-1349.
[15] Messaoudi, M., Flah, A., Alotaibi, A. A., Althobaiti, A., Sbita, L., & Ziad El-Bayeh, C. (2022).
Diagnosis and Fault Detection of Rotor Bars in Squirrel Cage Induction Motors Using Combined
Park’s Vector and Extended Park’s Vector Approaches. Electronics, 11(3), 380.
[16] Gyftakis, K. N., Cardoso, A. J. M., & Antonino-Daviu, J. A. (2017). Introducing the Filtered Park’s and
Filtered Extended Park’s Vector Approach to detect broken rotor bars in induction motors
independently from the rotor slots number. Mechanical Systems and Signal Processing, 93, 30-50.
[17] 張竣閔(2021)。基於擴展派克向量模數與支持向量機之感應馬達故障診斷。國立臺灣科技大學
機械工程系碩士論文,台北市。 取自 https://hdl.handle.net/11296/5ach6w
[18] Raschka, S. (2015). Python machine learning. Packt publishing ltd.
[19] Singh, B. K., Verma, K., & Thoke, A. S. (2015). Investigations on impact of feature normalization
techniques on classifier's performance in breast tumor classification. International Journal of Computer
Applications, 116(19).
[20] Boutemedjet, S., Bouguila, N., & Ziou, D. (2008). A hybrid feature extraction selection approach for
high-dimensional non-Gaussian data clustering. IEEE Transactions on Pattern Analysis and Machine
Intelligence, 31(8), 1429-1443.
[21] Raudys, S. J., & Jain, A. K. (1991). Small sample size effects in statistical pattern recognition:
Recommendations for practitioners. IEEE Transactions on pattern analysis and machine
intelligence, 13(3), 252-264.
[22] Hu, L., Gao, W., Zhao, K., Zhang, P., & Wang, F. (2018). Feature selection considering two types of
feature relevancy and feature interdependency. Expert Systems with Applications, 93, 423-434.
[23] Bennasar, M., Hicks, Y., & Setchi, R. (2015). Feature selection using joint mutual information
maximisation. Expert Systems with Applications, 42(22), 8520-8532.
[24] Englehart, K., Hudgins, B., Parker, P. A., & Stevenson, M. (1999). Classification of the myoelectric
signal using time-frequency based representations. Medical engineering & physics, 21(6-7), 431-438.
[25] Chu, J. U., Moon, I., Lee, Y. J., Kim, S. K., & Mun, M. S. (2007). A supervised feature-projection-
based real-time EMG pattern recognition for multifunction myoelectric hand control. IEEE/ASME
Transactions on Mechatronics, 12(3), 282-290.
[26] Mahesh, B. (2020). Machine learning algorithms-a review. International Journal of Science and
Research (IJSR).[Internet], 9, 381-386.
[27] Hyde, K. K., Novack, M. N., LaHaye, N., Parlett-Pelleriti, C., Anden, R., Dixon, D. R., & Linstead, E.
(2019). Applications of supervised machine learning in autism spectrum disorder research: a
review. Review Journal of Autism and Developmental Disorders, 6(2), 128-146.
[28] Jiang, T., Gradus, J. L., & Rosellini, A. J. (2020). Supervised machine learning: a brief
primer. Behavior Therapy, 51(5), 675-687.
[29] James, G., Witten, D., Hastie, T., & Tibshirani, R. (2013). An introduction to statistical learning (Vol.
112, p. 18). New York: springer.
[30] R. Kohavi, "A study of cross-validation and bootstrap for accuracy estimation and model
selection", Proc. Int. Joint Conf. Artif. Intell., pp. 1137-1143, 1995.
[31] De Lathauwer, L., De Moor, B., & Vandewalle, J. (2000). An introduction to independent component
analysis. Journal of Chemometrics: A Journal of the Chemometrics Society, 14(3), 123-149.
[32] Cardoso, J. F. (1998). Blind signal separation: statistical principles. Proceedings of the IEEE, 86(10),
2009-2025.
[33] Ajami, A., & Daneshvar, M. (2012). Data driven approach for fault detection and diagnosis of turbine
in thermal power plant using Independent Component Analysis (ICA). International Journal of
Electrical Power & Energy Systems, 43(1), 728-735.
[34] Yang, T., Pen, H., Wang, Z., & Chang, C. S. (2016). Feature knowledge based fault detection of
induction motors through the analysis of stator current data. IEEE Transactions on instrumentation and
Measurement, 65(3), 549-558.
[35] Cong, F., Zhong, W., Tong, S., Tang, N., & Chen, J. (2015). Research of singular value decomposition
based on slip matrix for rolling bearing fault diagnosis. Journal of Sound and Vibration, 344, 447-463.
[36] Cui, L., Liu, Y., & Zhao, D. (2022). Adaptive singular value decomposition for bearing fault diagnosis
under strong noise interference. Measurement Science and Technology, 33(9), 095002.
[37] Xing, Z., Qu, J., Chai, Y., Tang, Q., & Zhou, Y. (2017). Gear fault diagnosis under variable conditions
with intrinsic time-scale decomposition-singular value decomposition and support vector
machine. Journal of Mechanical Science and Technology, 31(2), 545-553.
[38] Zhao, M., & Jia, X. (2017). A novel strategy for signal denoising using reweighted SVD and its
applications to weak fault feature enhancement of rotating machinery. Mechanical Systems and Signal
Processing, 94, 129-147.
[39] Zhao, X., & Ye, B. (2019). Separation of single frequency component using singular value
decomposition. Circuits, Systems, and Signal Processing, 38(1), 191-217.
[40] Gai, J., & Hu, Y. (2018). Research on fault diagnosis based on singular value decomposition and fuzzy
neural network. Shock and Vibration, 2018.
[41] Zhang, Q., Zhao, W., & Xiao, S. G. (2017, April). Fault diagnosis of gear based on singular value
decomposition and RBF neural network. In 2017 2nd International Conference on Frontiers of Sensors
Technologies (ICFST) (pp. 470-474). IEEE.
[42] Li, X., He, J., Cheng, Y., & Zhao, Y. (2019, July). The Accumulative Component Kurtosis in the SVD
Based Denoising of the Fault Diagnosis for Rolling Element Bearing of Generator. In IOP Conference
Series: Materials Science and Engineering (Vol. 563, No. 3, p. 032054). IOP Publishing.
[43] Liu, C., Harley, J. B., Bergés, M., Greve, D. W., & Oppenheim, I. J. (2015). Robust ultrasonic damage
detection under complex environmental conditions using singular value
decomposition. Ultrasonics, 58, 75-86.
[44] Makur, A., & Mitra, S. K. (2001). Warped discrete-Fourier transform: Theory and applications. IEEE
Transactions on Circuits and Systems I: Fundamental Theory and Applications, 48(9), 1086-1093.
[45] Sripathi, D. (2003). Efficient implementations of discrete wavelet transforms using FPGAs.
[46] Wei, S., Zhang, X., Xu, Y., Fu, Y., Ren, Z., & Li, F. (2020). Extended Park's vector method in early
inter‐turn short circuit fault detection for the stator windings of offshore wind doubly‐fed induction
generators. IET Generation, Transmission & Distribution, 14(18), 3905-3912.
[47] Cruz, S. M., & Cardoso, A. M. (2001). Stator winding fault diagnosis in three-phase synchronous and
asynchronous motors, by the extended Park's vector approach. IEEE Transactions on industry
applications, 37(5), 1227-1233.
[48] Han, J., Pei, J., & Kamber, M. (2011). Data mining: concepts and techniques. Elsevier.
[49] Jaganathan, P., Rajkumar, N., & Kuppuchamy, R. (2012). A comparative study of improved F-score
with support vector machine and RBF network for breast cancer classification. International Journal of
Machine Learning and Computing, 2(6), 741.
[50] 劉益宏 教授, “人工智慧特論”上課講義, 國立台灣科技大學, 2022.
[51] Myles, A. J., Feudale, R. N., Liu, Y., Woody, N. A., & Brown, S. D. (2004). An introduction to decision
tree modeling. Journal of Chemometrics: A Journal of the Chemometrics Society, 18(6), 275-285.
[52] Oshiro, T. M., Perez, P. S., & Baranauskas, J. A. (2012, July). How many trees in a random forest?.
In International workshop on machine learning and data mining in pattern recognition (pp. 154-168).
Springer, Berlin, Heidelberg.
[53] Freund, Y., & Schapire, R. E. (1996, July). Experiments with a new boosting algorithm. In icml (Vol.
96, pp. 148-156).
[54] Breiman, L. (1996). Bagging predictors. Machine learning, 24(2), 123-140.
[55] Breiman, L. (2001). Random forests. Machine learning, 45(1), 5-32.
[56] Wang, G., Hao, J., Ma, J., & Jiang, H. (2011). A comparative assessment of ensemble learning for
credit scoring. Expert systems with applications, 38(1), 223-230.
[57] Zhang, M. L., & Zhou, Z. H. (2007). ML-KNN: A lazy learning approach to multi-label
learning. Pattern recognition, 40(7), 2038-2048.
[58] Guo, G., Wang, H., Bell, D., Bi, Y., & Greer, K. (2003, November). KNN model-based approach in
classification. In OTM Confederated International Conferences" On the Move to Meaningful Internet
Systems" (pp. 986-996). Springer, Berlin, Heidelberg.
[59] Zhang, S., Li, X., Zong, M., Zhu, X., & Wang, R. (2017). Efficient kNN classification with different
numbers of nearest neighbors. IEEE transactions on neural networks and learning systems, 29(5),
1774-1785.
[60] Moldagulova, A., & Sulaiman, R. B. (2017, May). Using KNN algorithm for classification of textual
documents. In 2017 8th International Conference on Information Technology (ICIT) (pp. 665-671).
IEEE.
[61] Imandoust, S. B., & Bolandraftar, M. (2013). Application of k-nearest neighbor (knn) approach for
predicting economic events: Theoretical background. International Journal of Engineering Research
and Applications, 3(5), 605-610.
[62] Zhang, Z. (2016). Introduction to machine learning: k-nearest neighbors. Annals of translational
medicine, 4(11).
[63] Cost, S., & Salzberg, S. (1993). A weighted nearest neighbor algorithm for learning with symbolic
features. Machine learning, 10(1), 57-78.
[64] Zhang, Z. (2014). Too much covariates in a multivariable model may cause the problem of
overfitting. Journal of thoracic disease, 6(9), E196.
[65] Lantz, B. (2019). Machine learning with R: expert techniques for predictive modeling. Packt publishing
ltd.
[66] Haykin, S., & Network, N. (2004). A comprehensive foundation. Neural networks, 2(2004), 41.
[67] Rahmanifard, H., & Plaksina, T. (2019). Application of artificial intelligence techniques in the
petroleum industry: a review. Artificial Intelligence Review, 52(4), 2295-2318.
[68] Araque, O., Corcuera-Platas, I., Sánchez-Rada, J. F., & Iglesias, C. A. (2017). Enhancing deep learning
sentiment analysis with ensemble techniques in social applications. Expert Systems with
Applications, 77, 236-246.
[69] Abiodun, O. I., Jantan, A., Omolara, A. E., Dada, K. V., Mohamed, N. A., & Arshad, H. (2018). State-
of-the-art in artificial neural network applications: A survey. Heliyon, 4(11), e00938.
[70] Boyacioglu, M. A., Kara, Y., & Baykan, Ö. K. (2009). Predicting bank financial failures using neural
networks, support vector machines and multivariate statistical methods: A comparative analysis in the
sample of savings deposit insurance fund (SDIF) transferred banks in Turkey. Expert Systems with
Applications, 36(2), 3355-3366.
[71] Jahnavi, M. Introduction to Neural Networks, Advantages and Applications, towards Data Science, Jul
9, 2017.
[72] Samanta, B. (2004). Gear fault detection using artificial neural networks and support vector machines
with genetic algorithms. Mechanical systems and signal processing, 18(3), 625-644.
[73] Hyvärinen, A., & Oja, E. (2000). Independent component analysis: algorithms and applications. Neural
networks, 13(4-5), 411-430.
[74] 劉孟昆 教授, “資料科學與機器學習”上課講義, 國立台灣科技大學, 2022.
[75] F II, I. (1993). IEEE recommended practices and requirements for harmonic control in electrical power
systems. New York, NY, USA, 1-1.
[76] Gavish, M., & Donoho, D. L. (2014). The optimal hard threshold for singular values is $4/\sqrt {3}
$. IEEE Transactions on Information Theory, 60(8), 5040-5053.