研究生: |
吳政龍 Cheng-lung Wu |
---|---|
論文名稱: |
在IEEE802.16j網路下以路徑品質及頻寬配置為基礎之路徑選擇機制 Path Selection with Considering Path Quality and Bandwidth Allocation in IEEE 802.16j Networks |
指導教授: |
賴源正
Yuan-Cheng Lai |
口試委員: |
孫敏德
none 鄭瑞光 Ray-Guang Cheng |
學位類別: |
碩士 Master |
系所名稱: |
管理學院 - 資訊管理系 Department of Information Management |
論文出版年: | 2009 |
畢業學年度: | 97 |
語文別: | 英文 |
論文頁數: | 33 |
中文關鍵詞: | IEEE 802.16j 、中繼模式 、路徑選擇 、頻寬分配 |
外文關鍵詞: | IEEE 802.16j, Relay mode, Path selection, Bandwidth allocation |
相關次數: | 點閱:209 下載:3 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
IEEE 802.16j引進多跳中繼技術及增設中繼站,來延伸網路中的無線服務範圍及提升吞吐量。因此,連線可在眾多路徑中選擇一頻道品質較佳的路徑。再者,路徑選擇必須協調頻寬配置程序以防止封包在中繼路徑上發生壅塞情形。許多路徑選擇演算法被提出。然而,這些演算法沒有考慮整條路的頻道狀況和協調頻寬配置特性。這篇論文中,我們提出一多跳中繼徑選擇演算法稱頻寬配置感知路徑選擇,選路依據:(1) 整條路徑的頻道狀況; (2) 中繼路徑與直接路徑; (3) 路徑中的可用頻寬。從模擬結果顯示,BAAP勝過先前的方法可提升25% ~ 38%的吞吐量。
IEEE 802.16j introduces the multi-hop relaying technique and a new type of stations, Relay Stations (RS), to extend the radio coverage of the network and enhance the throughput. Therefore, the connection can have multiple paths and selects a good path according to the channel quality. Furthermore, the path selection process has to coordinate with the bandwidth allocation procedure to prevent packets from congesting on the RS. Many IEEE 802.16j multi-hop relay path selection algorithms were proposed. However, these algorithms do not consider the channel condition of the overall path and the bandwidth allocation procedure. In this paper, we proposed a multi-hop relay path selection algorithm called Bandwidth Allocation Awareness Path Selection Algorithm (BAAP), which selects a path based on (1) overall path quality rather than first hop, (2) relay and direct path, and (3) available bandwidth of each hop. From the simulation results, BAAP outperforms the previous works on goodput about 25% ~ 38%.
[1] S. Y. Wu, “Optimal infrastructure design and expansion of broadband wireless access networks,” European Journal of Operational Research, vol. 178, no. 1, pp. 322-329, 2007.
[2] IEEE 802.16 Working Group, “DRAFT standard for local and metropolitan area networks---part 16: air interface for broadband wireless access systems,” IEEE P802.16Rev2/D1, Oct. 2007.
[3] IEEE Draft Standard P802.16j/D5, “Part 16: Air interface for Fixed and Mobile Broadband Wireless Access Systems --- Multi-hop Relay Specification,” May 2008.
[4] G.Q. Wang, et al., “MMR network end-to-end routing and connection management”, IEEE C802.16j-07/092, Jan. 2007.
[5] Sheng-Shih Wang, Hua-Chiang Yin, Yi-Hsueh Tsai, and Shiann-Tsong Sheu, “An
Effective Path Selection Metric for IEEE 802.16-based Multi-hop Relay Networks,” in Proceedings of the IEEE Symposium on Computers and Communications (ISCC), Aveiro, Portugal, July 1-4, 2007.
[6] Sheng-Shih Wang, Hua-Chiang Yin, and Shiann-Tsong Sheu, “Symmetric Path Selection in IEEE 802.16 Multi-hop Relay Networks with Error Prone Links,” in Proceedings of the IEEE International Conference on Circuits & Systems for Communications (ICCSC), Shanghai, China, May 26-28, 2008.
[7] Sojeong Ann, Kyung Geun Lee, Hyung Seok Kim, “A Path Selection Method in IEEE 802.16j Mobile Multi-hop Relay Networks,” Second International Conference on Sensor Technologies and Applications, Aug. 25-31, 2008.
[8] J. Yun and M. Kavehrad, “PHY/MAC Cross-Layer Issues in Mobile WiMAX,” Bechtel Telecommunications Technical Journal, Jan. 2006.
[9] J. Sydir et al., “Harmonized Contribution on 802.16j Usage Models, “ IEEE
C802.16j-06/015, 2006.
[10] IEEE 802.16 Working Group, “DRAFT standard for local and metropolitan area networks-part 16: air interface for broadband wireless access systems,” IEEE P802.16Rev2/D1, Oct.2007.
[11] Y.-C. Lai and Y.-H. Chen, “A channel quality and qos aware bandwidth allocation algorithm for IEEE 802.16 base stations,” 22nd International Conference on Advanced Information Networking and Applications, pp.472-479, Mar. 2008.
[12] D. Soldani and S. Dixit, “Wireless relays for broadband access,” IEEE Commun. Mag., vol.46, pp. 58-66, Mar. 2008
[13] “The Network Simulator – NS-2.” http://www.isi.edu/nsnam/ns/