研究生: |
杜維剛 Wei-Kang Tu |
---|---|
論文名稱: |
單晶藍寶石基板平面研光製程之研光盤分析與開發研究 Analysis and Development of Lap for Mono-Crystalline Sapphire Wafer Lapping Process |
指導教授: |
陳炤彰
Chao-Chang Chen |
口試委員: |
趙崇禮
Choung-Lii Chao 鍾俊輝 Chun-Hui Chung |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2013 |
畢業學年度: | 101 |
語文別: | 中文 |
論文頁數: | 201 |
中文關鍵詞: | 藍寶石晶圓 、研光 、摩擦力溫度複合式檢測系統 、樹酯銅鐵研光盤 |
外文關鍵詞: | Mono-crystalline sapphire wafer, Lapping, Friction and temperature complex detection syste, Resin copper-iron Lap |
相關次數: | 點閱:231 下載:24 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
因應單晶藍寶石基板於固態照明(solid-state illumination)產業之大量需求,為提高藍寶石晶圓生產效率與加工品質,完善的晶圓平坦化製程建立有其必要性,而晶圓研光製程(Lapping)之研光品質的優劣影響了後段拋光所需製程時間與成本,本研究主要在研發新型研光盤並分析加工壓力、研光盤轉速製程參數和不同研光盤材質對研光的影響,由本研究建立之摩擦力與溫度複合式線上檢測系統(Friction and temperature complex detection system, FTCS),藉由材料移除率、摩擦力與溫度等性能及製程資料來調整製程參數,並用於研光終點檢測。由拋光實驗結果可得,改變加工壓力與研光盤轉速對於材料移除率的增益約可提升10.6%及38.6%,且使用金屬銅盤製程對於材料移除率的影響性較樹酯銅盤顯著。本研究另製作出樹酯銅盤及樹酯銅鐵盤以發展創新之固相反應輔助研光製程,所發展樹酯銅盤及樹酯銅鐵盤之研光盤用於藍寶石晶圓研光可達到1微米/分鐘之材料移除率,平均表面粗糙度Sa為7奈米-9奈米。本研究建立之FTCS系統與創新研光盤與製程研究成果可作為未來先進基板研拋光產業新製程開發。
Due to demand of mono-crystal sapphire wafers in solid-state illumination industry, sapphire wafer planarization process needs to be investigated to improve wafer production efficiency and quality. Diamond lapping is one critical process to reduce long polishing time of sapphire wafers. This study develops a friction and temperature complex detected system (FTCS) for prediction of effects induced by lapping process parameter and different kinds of lapping plates. Based on performance of material removal rate (MRR), coefficient of friction (COF), variation of temperature obtained by the FTCS, the lapping process parameter can be used to find the endpoint detection of lapping process. Experimental results of MRR have been improved as 10.6% and 38.6% by increasing lapping pressure and lapping plate speed. Moreover, a self-developed resin copper lap (RCL) has been fabricated for comparison of MRR and a resin copper-iron lap (RCFL) has been designed and fabricated for developing a solid-state reaction assisted lapping (SS-Lapping) process of the sapphire wafers in this study, MRR could achieve up to 1 µm/min and surface roughness Sa maintains 7nm to 9nm by such self-made RCL and RCFL. Furthermore, the FTCS and RCFL could be applied on future study to develop different lapping process of advanced wafer fabrication.
[1]Nichia. Corporation, "Blue LED," http://www.nichia.co.jp/en/about_nichia/index.html
[2]財團法人光電科技工業協進會, http://www.pida.org.tw/
[3]安光國, 現代半導體發光及雷射二極體材料技術,全華出版,2001 。
[4]D. C. Harris, "A peek into the history of sapphire crystal growth," Proc. SPIE 5078, Window and Dome Technologies VIII, 2003.
[5]Elena R. Dobrovinskaya , Leonid A. Lytvynov, and V. Pishchik, "Sapphire," Springer, 2009.
[6]汪建民, 陶瓷技術手冊(上、下),經濟部技術處,1994。
[7]Kyocera corporation, "SINGLE CRYSTAL SAPPHIRE," http://global.kyocera.com/
[8]B.R. Lawn "Hardness, toughness, and brittleness- An indentation analysis," American Ceramic Society, Vol.62, 1979.
[9]R. Rabe, J. M. Breguet, P. Schwaller, S. Stauss, F. J. Haug, J. Patscheider,"Observation of fracture and plastic deformation during indentation and scratching inside the scanning electron microscope," Thin Solid Films, vol. 469-470, pp. 206-213, 2004.
[10]T. Lube, " Indentation crack profiles in silicon nitride," European Ceramic Society, 2001.
[11]N. Belkhir, D. Bouzid, and V. Herold, "Surface behavior during abrasive grain action in the glass lapping process," Applied Surface Science, vol. 255, pp. 7951-7958, 2009.
[12]M. Buijs and K. Houten, "Three-body abrasion of brittle materials as studied by lapping," Wear, 1993.
[13]Y. P. Chang, D. A. Dornfeld, "An Investigation of Material Removal Mechanisms in Lapping with Grain Size Transition," Manufacturing Science and Engineering, 2000.
[14]S. Li, Z. Wang, and Y. Wu, "Relationship between subsurface damage and surface roughness of optical materials in grinding and lapping processes," Journal of Materials Processing Technology, vol. 205, pp. 34-41, 2008.
[15]L.S. Deshpande, S. Raman, O. Sunanta, and C. Agbaraji, "Observations in the flat lapping of stainless steel and bronze," Wear, vol. 265, pp. 105-116, 2008.
[16]D. Wen, L. Yang, Z. Wang, K. Zhang, J. M. Schoen, Y. Namba, "Experimental investigation on the effect of abrasive grain size on the lapping uniformity of sapphire wafer," SPIE, pp. 72820C-72820C-6, 2009.
[17]S. Bhagavat, J. C. Liberato, C. Chung, and I. Kao, "Effects of mixed abrasive grits in slurries on free abrasive machining (FAM) processes," International Journal of Machine Tools and Manufacture, vol. 50, pp. 843-847, 2010.
[18]M. Buijs, "A model for lapping of glass," MATERIALS SCIENCE 1993.
[19]Ching-Hsiang Tseng,"藍寶石基板研光之研光盤溝槽形狀與應力應變分析",中國機械工程年會,2011。
[20]Ching-Hsiang Tseng, Research of Planarization and Friction Force Analysis on Lapping of Sapphire Wafers, National Taiwan University of Science and Technology, Master's dissertation of Department of Machenical Engineering, 2012.
[21]H.J. Kim, H.D. Jeong, E.S. Lee, Y.J. Shin, "Friction and thermal phenomena in chemical mechanical polishing," Journal of Materials Processing Technology, 2002.
[22]Hyunseop Lee, Haedo Jeong, "Mechanical effect of colloidal silica in copper chemical mechanical planarization," Journal of Materials Processing Technology, pp. 6134–6139, 2009.
[23]Justyna Molenda, "The influnce of abrasive machine on temperature during one sidelapping," Journal of KONES Powertrain and Transport, vol. Vol. 17, 2010.
[24]Zefang Zhang, Lei Zhang,Weili Liu, Zhitang Song, "Effect of mechanical process parameters on friction behavior and material removal during sapphire chemical mechanical polishing," Microelectronic Engineering, pp. 3020-3023, 2011.
[25]ZORAN PETROVIC, "Study of Epoxy Resin-Filler Interaction," polymer composites, vol. Vol. 9, No. 1, 1988.
[26]Mangeng Lu, Sangwook Kim, "Effect of Filler on Cure Behavior of an Epoxy System cure modeling," Polymer Engineering and Science, Vol. 39, No. 2, 1999.
[27]Haiying Wang, Sheng Liu, Jiali Wu, C.P. Wong, "Combined effects of silica filler and its interface in epoxy," Acta Materialia, pp. 4369–4377, 2002.
[28]F. N. Ahmad, M. Jaafar, S. Palaniandy, and K. A. M. Azizli, "Effect of particle shape of silica mineral on the properties of epoxy composites," Composites Science and Technology, vol. 68, pp. 346-353, 2008.
[29]Chih-Ming Chen, Huey-Ling Chang, Zhiyu Yang,"製備及優化奈米複合材料熱膨脹性質之研究",中國機械工程年會,2012。
[30]R. Komanduri, Y. Tani, "Technological Advances in Fine Abrasive Processes," Annals of the CIRP, vol. 46, 1997.
[31]E. U. Ioan D. Marinescu, Toshiro K. Doi, Handbook of Lapping and Polishing,Taylor & Francis Group, LLC,2006。
[32]Xin-huan Niu, Bai-mei Tan, Li-ying Han, Jian-xin Zhang, "Method of surface treatment on sapphire substrate," Transactions of Nonferrous Metals Society of China, pp. s732-s734, 2006.
[33]Ioan D. Marinescu, Boris Dimitrov, Hitoshi Ohmori, Tribology of Abrasive Machining Processes,William Andrew,2013.
[34]F. W. Preston, "The theory and design of plate glass polishing machine," society of glass technology, 1927.
[35]Chen Chao-Chang, "Process Modeling of Manufacturing Processes," 2011.