簡易檢索 / 詳目顯示

研究生: 吳佳翰
Chia-Han Wu
論文名稱: 週期性阻抗變化之槽線模態濾波器
Coupled-Slotline Mode Filter Using Periodic Impedance Structure
指導教授: 王蒼容
Chun-Long Wang
口試委員: 王蒼容
Chun-Long Wang
吳瑞北
Ruey-Beei Wu
楊成發
Chang-Fa Yang
曾昭雄
Chao-Hsiung Tseng
學位類別: 碩士
Master
系所名稱: 電資學院 - 電子工程系
Department of Electronic and Computer Engineering
論文出版年: 2019
畢業學年度: 107
語文別: 中文
論文頁數: 177
中文關鍵詞: 週期性阻抗變化槽線模態濾波器
外文關鍵詞: Periodic Impedance Structure, Coupled-Slotline Mode, Filter
相關次數: 點閱:116下載:0
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

  • 摘要 Abstract 誌謝 目錄 圖目錄 表目錄 第1章 序論 1.1 研究動機 1.2 文獻探討 1.3 論文貢獻 1.4 論文架構 第2章 週期性阻抗變化的單線槽線濾波器 2.1 均勻阻抗單線槽線 2.1.1 槽線特性阻抗的萃取 2.1.2 頻域均勻阻抗單線槽線的模擬結果 2.2 週期性阻抗變化的單線槽線 2.2.1 設計過程 2.2.2 頻域的模擬結果 2.3 均勻阻抗與週期性阻抗變化的單線槽線之比較 2.3.1 頻域的模擬比較 2.4 小結 第3章 週期性阻抗變化之槽線模態濾波器 3.1 耦合槽線負載阻抗的模擬設定 3.1.1 金屬共面波導負載阻抗與耦合槽線負載阻抗的匹配 3.2 弱耦合槽線 3.2.1 頻域弱耦合槽線的模擬結果 3.2.2 時域的模擬結果 3.2.3 眼圖 3.2.4 驗證 3.2.4.1 頻域的模擬與量測 3.2.4.2 時域的模擬與量測 3.3 強耦合槽線 3.3.1 頻域強耦合槽線的模擬結果 3.3.2 時域的模擬結果 3.3.3 眼圖 3.3.4 驗證 3.3.4.1 頻域的模擬與量測 3.3.4.2 時域的模擬與量測 3.4 週期性阻抗變化的耦合槽線 3.4.1 設計過程 3.4.1.1 耦合槽線忽略不連續 3.4.1.2 補償耦合槽線阻抗 3.4.1.3 補償耦合槽線阻抗且考慮電氣長度不連續 3.4.2 頻域週期性阻抗變化的耦合槽線的模擬結果 3.4.3 時域的模擬結果 3.4.4 眼圖 3.4.5 驗證 3.4.5.1 頻域的模擬與量測 3.4.5.2 時域的模擬與量測 3.5 弱耦合、強耦合與週期性阻抗變化的耦合槽線之比較 3.5.1 頻域的模擬結果比較 3.5.1 時域的模擬結果比較 3.5.2 眼圖比較 3.6 小結 第4章 九十度彎角週期性阻抗變化的槽線模態濾波器 4.1 弱耦合九十度彎角耦合槽線 4.1.1 頻域弱耦合九十度彎角耦合槽線的模擬結果 4.1.2 時域的模擬結果 4.1.3 眼圖 4.1.4 驗證 4.1.4.1 頻域的模擬與量測 4.1.4.2 時域的模擬與量測 4.2 強耦合九十度彎角耦合槽線 4.2.1 頻域強耦合九十度彎角耦合槽線的模擬結果 4.2.2 時域的模擬結果 4.2.3 眼圖 4.2.4 驗證 4.2.4.1 頻域的模擬與量測 4.2.4.2 時域的模擬與量測 4.3 週期性阻抗變化的九十度彎角耦合槽線 4.3.1 頻域週期性阻抗變化的九十度彎角耦合槽線的模擬結果 4.3.2 時域的模擬結果 4.3.3 眼圖 4.3.4 驗證 4.3.4.1 頻域的模擬與量測 4.3.4.2 時域的模擬與量測 4.4 弱耦合、強耦合與週期性阻抗變化的九十度彎角耦合槽線之比較 4.4.1 頻域的模擬結果比較 4.4.2 時域的模擬結果比較 4.4.3 眼圖比較 4.5 小結 第5章 結論 參考文獻 附錄A 週期性變化之能量輻射 附錄B 與實務上常用的彎角方法比較

    [1] C. P. Wen, "Coplanar Waveguide: A Surface Strip Transmission Line Suitable for Nonreciprocal Gyromagnetic Device Applications," IEEE Trans. Micro. Theory Tech., vol. 17, no. 12, pp. 1087-1090, 1969.
    [2] M. N. Wu, S. M. Deng, R. B.Wu, and P. Hsu, "Full-wave characterization of the mode conversion in a coplanar waveguide right-angled bend," IEEE Trans. Micro. Theory Tech., vol. 43, no. 11, pp. 2532-2538, 1995.
    [3] H. Sawasa, "Radiation from bend in CPW angular and circular bends," in 1994 Int. Symp. on EM Comp., p. 325, 1994.
    [4] N. H. L. Koster, S. Koblowski, R. Bertenburg, S. A. H. S. Heinen, and I. A. W. I. Wolff, "Investigations on Air Bridges Used for MMICs in CPW Technique," in 19th Eu. Microw. Conf., pp. 666-671,1989.
    [5] D. Jaisson, "Coplanar waveguide bend with radial compensation," Proc. Inst. Elect. Eng. - Micro., Antennas, Propag., vol. 143, no. 5, pp. 447-450, 1996.
    [6] N. I. Dib, P. B. Katehi, and G. E. Ponchak, "Analysis of shielded CPW discontinuities with air-bridges," in 1991 IEEE MTT-S International Microwave Symposium Digest, 10-14, pp. 469-472 vol.2, July 1991.
    [7] L. Chung-Yi, L. Yaozhong, and I. Tatsuo, "The effects of the coupled slotline mode and air-bridges on CPW and NLC waveguide discontinuities," IEEE Tran. Microw. Theory Tech., vol. 43, no. 12, pp. 2759-2765, 1995.
    [8] P. M. Watson and K. C. Gupta, "Design and optimization of CPW circuits using EM-ANN models for CPW components," IEEE Tran. Micro. Theory Tech, vol. 45, no. 12, pp. 2515-2523, 1997.
    [9] P. M. Watson and K. C. Gupta, "EM-ANN modelling and optimal chamfering of 90/spl deg/ CPW bends with air-bridges," in 1997 IEEE MTT-S International Microwave Symposium Digest, , vol. 3, pp. 1603-1606,1997.
    [10] R. N. Simons and G. E. Ponchak, "Modeling of some coplanar waveguide discontinuities," IEEE Trans.Microw. Theory Tech., vol.36,no. 12, pp. 1796-1803 , 1988.
    [11] T. M. Weller, R. M. Henderson, K. J. Herrick, S. V. Robertson, R. T. Kihm, and L. P. B. Katehi, "Three-dimensional high-frequency distribution networks. I. Optimization of CPW discontinuities," IEEE Trans. Micro. Theory Tech, vol. 48, no. 10, pp. 1635-1642, 2000.
    [12] J. Y. Park, J. K. Sim, J. K. Shin, and J. H. Lee, "Fabrication of thick silicon dioxide air-bridge for RF application using micromachining technology," in Int. Microprocesses and Nanotechnology Conference, pp. 202-203, 2001.
    [13] C.-Y. Lin, Y.-C. Lee, C.-Y. Liao, and C.-L. Wang, “Reflection noise elimination using bondwire-free balanced CPW,” Asia-Pacific Radio Science Conf., 2013.

    無法下載圖示 全文公開日期 2024/08/23 (校內網路)
    全文公開日期 2024/08/23 (校外網路)
    全文公開日期 2024/08/23 (國家圖書館:臺灣博碩士論文系統)
    QR CODE