研究生: |
黃于嘉 Yu-Chia Hang |
---|---|
論文名稱: |
產品開發過程工業設計與機構設計之衝突管理研究以行動電話開發過程為例 A Study of Conflict Management on Product Development in The Industrial and Mechanical Design With the Mobile Phone as Example |
指導教授: |
張文智
Wen-chih Chang |
口試委員: |
鄧成連
Cheng-Lein Teng 鄭金典 Jin-Dian Cheng |
學位類別: |
碩士 Master |
系所名稱: |
設計學院 - 設計系 Department of Design |
論文出版年: | 2005 |
畢業學年度: | 93 |
語文別: | 中文 |
論文頁數: | 114 |
中文關鍵詞: | 衝突管理 、設計管理 、設計策略 、設計溝通 、產品設計開發 |
外文關鍵詞: | Conflict Management, Product Development, Mobile Phone |
相關次數: | 點閱:590 下載:9 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
產品設計開發所顧及的層面,已不只是在外觀造形的追求而已,產品在設計的過程中會遭遇到許多不可預期的問題。產品設計開發階段流程包含從計劃階段至產品量產階段為止,對於開發設計過程中,工業設計與機構設計為整個開發案中所扮演角色相當。成功的產品設計及其設計品質包括兩者,實際的開發設計過程中,兩部門的密切配合影響專案的最終品質。開發設計中,工業設計與機構設計兩者的衝突性於開發專案中經常存在,其影響專案的程度上也可能為立即影響,也可能於某個開發過程及階段中才被發覺。專案執行的產品品質亦會受影響。
本研究藉由實際的開發案例中歸納分析,發現影響工業設計與機構設計之衝突因素,可分為直接因素及間接因素兩類。
於研究發現直接因素主要為設計技術問題,其個案解決方法有:
1. 設計師在產品設計開發專案中,應具備設計的分析評估能力,同時扮演與專案成員間積極的溝通角色。
2. 在產品設計開發專案的設計發展中,應及早加入各專業領域的評估意見。
3. 產品設計開發專案的溝通,以協助設計專案的進行。
另外亦發現間接影響之衝突因素為:
1. 設計之組織開發管理流程及程序,產品開發中垂直系統整合方面之設計管理問題。
2. 企業管理者的設計策略及產品策略影響。
3. 非設計管理者與設計管理者、設計師及工程師及各功能部門之間的產品開發設計之溝通為最大影響因素。
In the product design and development each stage so much things have to take care it. It is not only in the product appearance or looks. For product development process some problem will unexpected to occur. The generic product development process consists of six phases. The process begins with planning phase end of production ramp-up phase. In the development process industrial and mechanical design equally important. The product and design quality to be successful comprise both industrial and mechanical design. Actuality, The two-functional department closes collaboration together in the project development. It's will effect the product design process and product quality. So the conflict will frequently to occur in the product design and development with the both industrial and mechanical design functional department. And the affect will to exercise influence over either at present or in the future.
At this study take several real case to draw a conclusion to collect data. It's got the factor on conflict between both industrial and mechanical design. The cause include immediate and backhanded:
In this study to detect the immediate cause about the design technology below:
1. In the product design and development process. The designer to be provides with an analysis and evaluation about the manufacture and design technology.
2. In the product design and development. The each functional knowledge and experience will early to study like market analysis, technical specification.
3. The one more cause is communicated with each functional department. It is going to make the progress successfully.
Also in this study to detect the backhanded cause below:
1. A product development organization is the scheme by which individual designers and developers are linked together into groups.
2. An enterpriser's design strategy and product strategy will to crafting an effective development process.
3. Product design and development effective is the communication. That case between the non-design manager and design manager, designer and engineer, also between the each functional.
中文部份:
[1] Project Management Institute國際專案管理協會,熊培霖、吳俊德、蘇佳慧譯(2000)。A Guide to the Project Management Body of Knowledge專案管理知識體系導讀指南。2000 Edition,博頡策略顧問股份有限公司。
[2] 張文智(1996)。設計管理之發展及應用產品開發技巧,產品開發技巧及資源管理知識。蔣氏工業基金一九九六年巡迴講學,國際工業設計。
[3] 張文智(1996)。設計管理之發展及應用產品開發技巧,設計管理之發展及應用。蔣氏工業基金一九九六年巡迴講學,國際工業設計。
[4] 張文智,王得煒(1995),產品設計評價,國立台灣科技大學工程技術研究所碩士論文。
[5] 李昆林(2001)。知識管理與學習曲線之應用。管理雜誌,100-103。
[6] 戴久永(2001)。戴明理論融入知識管理。管理雜誌,82-84。
[7] 方世榮、楊偉智、周文瓊(2004)。新產品開發績效之研究關係管理觀點。科技管理學刊,第九卷,第一期,89-124。
[8] 吳炘庭(1999)。新產品開發流程資訊自動化之研究。臺北大學生產系統工程與管理研究所碩士論文。
[9] 黃貝玲(2002)。供應鏈管理之概念解析與發展趨勢。電子化企業經理人報告,31期,頁8-19。
[10] 林志銘(2002)。協同產品商務系統導入之研究。中山大學資訊管理研究所碩士論文。
[11] 蕭漢臣(2001),淺談協同產品商務,參數科技 。
[12] 陳文誌、游萬來(2001)。線上輔助設計課程的建構初探。設計研究,第一期,55-61。
[13] 林同利(1998),電子產品開發設計策略模式之研究,大同工學院工業設計研究所碩士論文,pp.20。
[14] 蕭全智(2004),工業設計與機構設計之實務應用,電腦繪圖與設計雜誌,28-34。
[15] 陳啟雄,程英斌(2004),設計創造運思模式與變項間之互動關係研究,設計學報,第九卷,第二期,71-85。
[16] 翁田山(2004),品質月刊,品質績效,技術能力,第40卷,第12期,67-72。
[17] 何信坤(2003),產品設計專案管理之溝通效益研究,實踐大學工業產品設計學系碩士在職專班碩士論文。
[18] 艾國強譯(1994),業績、薪資、獎金,二版,台北:清泉出版。
[19] 陳彥榮(2000),台灣家電的企業設計文化研究,雲林科技大學工業設計技術研究所碩士論文。
[20] 吳榮華(2003),研發效率與流程研究,元智大學管理研究所碩士論文。
[21] 曾慧玲(2003),協同設計下模組化模式與人員指派之研究,元智大學工業工程與管理學系碩士論文。
[22] 林國文(1997),產品設計開發過程中企業設計溝通模式與設計品質之相關性研究,國立成功大學工業設計學系碩士論文。
[23] 鄧成連(1999),設計管理,產品設計之組織、溝通與運作,亞太圖書出版社。
[24] Stephen P. Robbins,Mary Coulter,林孟彥譯(2003)。MANAGEMENT管理學。Seventh Edition,台北市,華泰文化事業公司。
[25] 葉枝龍,閻建政,”數位化資訊時代工業設計師在產品開發過程中所應扮演角色之初探”,「e世紀的挑戰」國際學術研討會論文集,125-135頁,2002年3月。
[26] 莊普晴(2002),產品開發組織對於產品設計品質影響之研究,國立台灣科技大學設計研究所碩士論文。
[27] 許言(2004),我國家電業廠商因應加入WTO在產品設計方面之策略探討,國立台灣科技大學設計研究所博士論文。
英文部份:
[1] Karl T. Ulrich & Steven D. Eppinger (2000) ,Product Design and Development,Second Edition,McGraw-Hill.
[2] Michael E. McGrath (2001) ,Product Strategy for High-Technology Companies,Second Edition,McGraw-Hill.
[3] Glaser, B. G. & Anselm L. S (1967) ,Discover of Grounded Theory: Strategies for Qualitative Research,Chicago: Aldine.
[4] McBurney, D. H. (2001) ,Research Methods (Fifth Edition) ,pp.223,Thomson Learning, Inc. ,USA.