簡易檢索 / 詳目顯示

研究生: 李宗嶧
Zong-Yi Lee
論文名稱: LED路燈設計方法
The Design Method of LED Street Lighting
指導教授: 黃忠偉
Jong -Woei Whang
口試委員: 王秀仁
Show-Ran Wang
邱炳樟
Bin-Chang Chieu
林保宏
Pao-hung Lin
陳志朋
Zhi-Peng Chen
學位類別: 碩士
Master
系所名稱: 電資學院 - 電子工程系
Department of Electronic and Computer Engineering
論文出版年: 2010
畢業學年度: 98
語文別: 中文
論文頁數: 75
中文關鍵詞: LED路燈光學設計矮路燈
外文關鍵詞: LED street lighting, optical design, low street lighting
相關次數: 點閱:184下載:1
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

本論文針對近幾年內有關LED路燈光學設計的文獻,進行搜集、整理、分析以及比較,並參考其光學設計之方法。
傳統的路燈高度依照燈具型式、排列方式、燈杆種類以及使用地區的不同,高度從5公尺到10公尺都有,在此高度下,若是發生損壞、故障的情況,則維修相當不容易,且在維修的途中也存在一定的風險。本研究特別提出一種新型LED道路照明燈具—「矮路燈」,顧名思義「矮路燈」即是高度不高的路燈,由於高度不高,因此維修、保養相當容易;此外,本研究亦針對「矮路燈」進行初步模擬,以期望能夠達到與傳統路燈相同的照明效果。


This study first conducts a literature review on the optical designs for LED street lighting in order to propose a novel optical design. It is found that the height of traditional street lighting ranges from 5 m to 10 m, for various luminaire types, arrangements, kinds of lampposts, and locations. At this height, it is difficult to repair a breakdown, and risks exist during repairs. This study proposes a novel design of LED lighting fixture – low street lighting, which is installed close to the ground, and thus is easier to maintain and repair. The proposed low street lighting can achieve the same luminance performance as traditional street lighting.

論文摘要 I ABSTRACT II 致 謝 III 圖 目 錄 VI 表 目 錄 IX 第1章 緒論 1 1.1 研究背景 1 1.2 研究動機與目的 4 1.3 重要文獻回顧 5 2.1 道路照明工程 8 2.1.1 設計概述 8 2.1.2 設計規範及準則 8 2.1.3 設計步驟、流程及方法 9 2.3 傳統路燈 19 2.3.1 路燈光源比較 19 2.3.2 傳統路燈光學設計與光學結構 21 第3章 LED路燈光學設計概述 24 3.1 光學設計概述 24 3.1.1 反射罩 25 3.1.2 透鏡 30 3.2 LED路燈系統 35 3.2.1 LED路燈光學設計方法 36 3.2.2 LED路燈光學結構 36 第4章 矮路燈 49 4.1 矮路燈型式 49 4.1.1 反射罩型矮路燈 50 4.1.2 導光板型矮路燈 50 4.1.3 直接型矮路燈 51 4.2 矮路燈光學設計 51 4.2.1 模擬條件 52 4.2.2 模擬一:平面反射罩型矮路燈 53 4.2.3 模擬二:曲面反射罩型矮路燈 56 4.2.4 模擬三:導光板型矮路燈 58 4.2.5 模擬四:直接型矮路燈 60 4.2.6 矮路燈比較 61 第5章 結論與未來展望 62 5.1 結論 62 5.2 未來展望 63

[1] Neary, M., and Quijano, M., "Solid State Lighting for Industrial Locations," in 2009 Record of Conference Papers - Industry Applications Society 56th Annual Petroleum and Chemical Industry Conference, PCIC 2009 (2009)
[2] Aoyama, Y., and Toshiaki, Y., "An Led Module Array System Designed for Streetlight Use," in 2008 IEEE Energy 2030 Conference, ENERGY 2008 (2008)
[3] Timinger, A., and Ries, H., "Street-lighting with LEDs," in Proceedings of SPIE - The International Society for Optical Engineering, Vol. 7103 (2008)
[4] Taguchi, T., Uchida, Y., Setomoto, T., and Kobashi, K., "Application of White LED Lighting to Energy-saving Type Street Lamps," in Proceedings of SPIE - The International Society for Optical Engineering, Vol. 4278, pp. 7-12 (2001)
[5] Chen, J. X., Shang S. J., Zhao, A. L., Zhai, F. L., and Shi, C., "Simulation and Investigation of Chip Encapsulation for Solar LED Street Lanlern," ZHAOMING GONGCHENG XUEBA0, Vol. 19, No. 2, pp. 66-70 (2008)
[6] Han, J. W., and Liu, X. G., "Energy-saving LED Road Light," CHINA LIGHT& LIGHTING, No. 1, pp. 17-22 (2009)
[7] Liu, C. D., "Application of LED Street Lamp in Road Lighting," CHINA LIGHT & LIGHTING, No. 3, pp. 30-34 (2009)
[8] Li, Z. M., Zhu, X. Q., Wang, R., and Xue, P., "Optical System Research and design of LED Street Light," LASER JOURNAL, Vol. 30, No. 5, pp. 73-74 (2009)
[9] Jiang, J. B., To, S., Lee, W. B., and Cheung, B., "Optical Design of A Freeform TIR Lens for LED Streetlight," Optik, (2009)
[10] Wang, K., Liu, S., Chen, F., Liu, Z. Y., and Luo, X. B., "Novel Application-specific LED Packaging with Compact Freeform Lens," in Proceedings - Electronic Components and Technology Conference, pp. 2125-2130 (2009)
[11] Chen, F., Wang, K., Liu, Z., Luo, X. B., and Liu, S., "Freeform lens for application-specific LED packaging," in 2009 International Conference on Electronic Packaging Technology and High Density Packaging, ICEPT-HDP 2009, pp. 443-447 (2009)
[12] Liu, Y., Ding, D. L., Leung, C. H., Ho, Y. K., and Lu, M., "Optical Design of A High Brightness LED Street Lamp," in Proceedings of SPIE - The International Society for Optical Engineering, Vol. 7635 (2009)
[13] Curran, J. W., and Keeney, S. P., "Replacement of Fluorescent Lamps with High-brightness LEDs in A Bridge Lighting Application," in Proceedings of SPIE - The International Society for Optical Engineering, Vol. 6337 (2006)
[14] X. Jun, "Measurement and Analysis for Illumination of LED Lamps," Construction Conserves Energy, Vol. 11, pp. 66-68 (2008)
[15] Pelka, D. G. and Patel, K., "An Overview of LED Applications for General Illumination," in Proceedings of SPIE - The International Society for Optical Engineering, Vol. 5186, pp. 15-26 (2003)
[16] Jiang, J. B., To, S., and Lee, W. B., "Optical Design of a Freeform Lens for LED Street Light," ZHAOMlNG GONGCHENG XUEBA0, Vol. 19, No. 4, pp. 59-65 (2008)
[17] Long, X., Liao, R., and Zhou, J., "Development of street lighting system-based novel high-brightness LED modules," IET Optoelectronics, Vol. 3, No. 1, pp. 40-46 (2009)
[18] Wang, K., Luo, X. B., Liu, Z. Y., Zhou, B., Gan, Z. Y., and Liu, S., "Optical Analysis of An 80-W Light-emitting-diode Street Lamp," Optical Engineering, Vol. 47, No. 1 (2008)
[19] Yang, C. Y., "Study on LED Streetlamps with Road Lighting Safe in the Condition of Mesoptie Vision," LIGHT & LIGHTING, Vol. 32, pp. 12-15, (2008)
[20] Wu. C. H., "Analysis and Proposals for Test Report of LED Road Lamp," BUILIDING ELECTRICITY, Vol. 28, No.10, pp. 35-37 (2009)

[21] 道路照明工程(2007),http://www.google.com.tw/url?sa=t&source=web&cd=1&ved=0CBYQFjAA&url=http%3A%2F%2Fpcces.archnowledge.com%2Fcsi%2FTools%255CC%255CFun_10_3_Anlage%255C25.doc&ei=Tc0ITLykH86ecdSiwa4O&usg=AFQjCNHEqEdsNkMXUnkHV7OuobLD9jJA9w

[22] 「路燈」,維琪百科,http://en.wikipedia.org/wiki/Street_light

無法下載圖示 全文公開日期 2015/07/04 (校內網路)
全文公開日期 本全文未授權公開 (校外網路)
全文公開日期 本全文未授權公開 (國家圖書館:臺灣博碩士論文系統)
QR CODE