研究生: |
莊昀倩 Yun-Chien Chuang |
---|---|
論文名稱: |
以奈米壓痕技術探討無機聚合物漿體之物化性質 Physicochemical Properties of Geopolymer Gel Characterized by Nanoindentation |
指導教授: |
陳君弢
Chun-Tao Chen |
口試委員: |
陳君弢
張大鵬 朱瑾 王韡蒨 |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 營建工程系 Department of Civil and Construction Engineering |
論文出版年: | 2021 |
畢業學年度: | 109 |
語文別: | 中文 |
論文頁數: | 252 |
中文關鍵詞: | 奈米壓痕 、微觀分析 、彈性模數 、硬度 、爐石基無機聚合物 、飛灰 、稻殼灰 |
外文關鍵詞: | nanoindentation, microanalysis, elastic modulus, hardness, slag based geopolymer, coal fly ash, rice husk ash |
相關次數: | 點閱:530 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
[1] Adesina, P. A., Olutoge, F. A. (2019). "Structural properties of sustainable concrete developed using rice husk ash and hydrated lime."Journal of Building Engineering 25: 100804.
[2] Aliabdo, A. A., Elmoaty, A. E. M., Emam, M. A. (2019). "Factors affecting the mechanical properties of alkali activated ground granulated blast furnace slag concrete." Construction and Building Materials 197: 339-355.
[3] Bakharev, T., Sanjayan, J. G., Cheng, Y. B. (1999). "Effect of elevated temperature curing on properties of alkali-activated slag concrete." Cement and Concrete Research 29: 1619-1625.
[4] Banthia, N., Mindess, S., and Jiang, Z. W. (2011). "Influence of Feedback Control on Flexural Toughness of Fiber Reinforced Concrete in ASTM C1399 Tests." Journal of Testing and Evaluation 39: 664-670.
[5] Bhushan, B. (1999). "Surface Forces and Nanorheology of Molecularly Thin Films " Handbook of mirco/nanotribology 2nd Edition, 21: 543-603
[6] Berkovich, E. (1951). "Three faceted diamond pyramid for micro-hardness testing." Industrial Diamond Review 11: 129.
[7] Brough, A. R., Holloway, M., Sykes, J., Atkinson, A. (2000). "The retarding effect of additions of sodium chloride or malic acid." Cement and Concrete Research 30: 1375-1379.
[8] Cao, Y. Z. , Nannan, T., Bahr, D., Zavattieri, P. D. , Youngblood, J. , Moon, R. J. and Weiss, J. (2016). "The influence of cellulose nanocrystals on the microstructure of cement paste." Cement and Concrete Composites 74: 164-173.
[9] Cheng, T. W., and Chiu, J. P . (2003). "Fire-resistant geopolymer produced by granulated blast furnace slag." Minerals Engineering 16: 205-210.
[10] Chi, M. (2015). "Effects of modulus ratio and dosage of alkali-activated solution on the properties and micro-structural characteristics of alkali-activated fly ash mortars." Construction and Building Materials 99: 128-136.
[11] Davidovits, J. (2008). Geopolymer Chemistry & Application. France, Institut Géopolymère.23
[12] Davidovits, J., James, C.,Davidovits, R. (1999). Chemistry of geopolymer systems terminology. Proceedings Of Geopolymer 99 Second International Conference, Institut Geopolymere, Saint-Quentin, France.
[13] Alex, J., Dhanalakshmi, J. and Ambedkar, B. (2016). "Experimental investigation on rice husk ash as cement replacement on concrete production." Construction and Building Materials" 127: 353-362.
[14] Dey, A., and Mukhopadhyay, A. K. (2014). Nanoindentation of brittle solids ,CRC Press/Taylor & Francis Group: Boca Raton, FL, U.S.A.
[15] Duxson, P., Provis, J. L., Lukey, G. C.,van Deventer, J. S. J. (2007). "The role of inorganic polymer technology in the development of ‘green concrete’." Cement and Concrete Research 37(12): 1590-1597.
[16] Gautham, S., and Saptarshi S. (2019). "Recent Advances in Evaluation of intrinsic mechanical properties of cementitious composites using nanoindentation technique" Construction and Building Materials 223: 883-897.
[17] Gebregziabiher, B. S., Thomas, R. J.,Peethamparan, S. (2016). "Temperature and activator effect on early-age reaction kinetics of alkali-activated slag binders." Construction and Building Materials 113: 783-793.
[18] Haha, M. B., Lothenbach, B., Le Saout, G.,Winnefeld, F. (2011). "Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag — Part I: Effect of MgO." Cement and Concrete Research 41(9): 955-963.
[19] Hu, C. and Li, Z. (2015). "A review on the mechanical properties of cement-based materials measured by nanoindentation." Construction and Building Materials 90: 80-90.
[20] Hysitron, I. (2016). TI 980 TriboIndenter User Manual I. Hysitron, Hysitron, Inc.
[21] Ishlinsky, A. (1944). "The axial-symmetrical problem in plasticity and the Brinell test. " Theoretical Research Translation 2: 47.
[22] Jaroslav, M. (2012). "Uncertainties and Errors in Nanoindentation." in Nanoindentation in Materials Science, J. Nemecek, InTech, Rijeka, Croatia.
[23] Kjellsen, K. O., Monsøy, A., Isachsen, K. and Detwiler, R. J. (2003). "Preparation of flat-polished specimens for SEM-backscattered electron imaging and X-ray microanalysis—importance of epoxy impregnation." Cement and Concrete Research 33: 611-616.
[24] Knoop, F., Peters, C. G. and Emerson, W. B. (1939). "A sensitive pyramidal-diamond tool for indentation measurements." Journal of Research of the National Bureau of standards 23: 39-61.
[25] Komnitsas, K., Zaharaki, D.,Perdikatsis, V. (2009). "Effect of synthesis parameters on the compressive strength of low-calcium ferronickel slag inorganic polymers." Journal of Hazardous Materials 161(2): 760-768.
[26] Li, C., Sun, H.,Li, L. (2010). "A review: The comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements." Cement and Concrete Research 40(9): 1341-1349.
[27] Lips, E. and Sack, J. (1936). "A hardness tester for microscopical objects." Nature 138: 328.
[28] Luo, Z., Li, W., Gan, Y., Mendu, K. and Shah, S.P. (2020). "Applying grid nanoindentation and maximum likelihood estimation for N-A-S-H gel in geopolymer paste: Investigation and discussion." Cement and Concrete Research 135: 106112.
[29] Maragkos, I., Giannopoulou, I. P.,Panias, D. (2009). "Synthesis of ferronickel slag-based geopolymers." Minerals Engineering 22: 196-203.
[30] Mondal, P., Shah, S. P. and Marks, L. (2007). "A reliable technique to determine the local mechanical properties at the nanoscale for cementitious materials." Cement and Concrete Research 37: 1440-1444.
[31] Muthukrishnan, S., Gupta, S.,Kua, H. W. (2019). "Application of rice husk biochar and thermally treated low silica rice husk ash to improve physical properties of cement mortar." Theoretical and Applied Fracture Mechanics 104: 102376.
[32] Newey, D., Wilkins, M. A. and Pollock, H. M. (1982). "An Ultra-Low-Load Penetration Hardness Tester." Journal of Physics E-Scientific Instruments 15: 119-122.
[33] Oliver, W. C., and Pharr, G. M. (1992). "An Improved Technique for Determining Hardness and Elastic-Modulus Using Load and Displacement Sensing Indentation Experiments." Journal of Materials Research 7: 1564-1583.
[34] Palomo, M. W. G. A.,Blanco, M. T. (1999). "Alkali-activated fly ashes: A cement for the future." Cement And Concrete Research 29: 1323-1329.
[35] Phair, J. W., Smith, J. D.,Van Deventer, J. S. J. (2003). "Characteristics of aluminosilicate hydrogels related to commercial "Geopolymers"" Materials Letters 57: 4356-4367.
[36] Phair, J. W.,Van Deventer, J. S. J. (2002). "Effect of the silicate activator pH on the microstructural characteristics of waste-based geopolymers." International Journal of Mineral Processing 66: 121-143.
[37] Pharr, G. M. (1998). "Measurement of mechanical properties by ultra-low load indentation." Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 253: 151-159.
[38] Purdon, A.O. (1940). "The action of alkali on the blast furnace slag." Journal Of The Society Of Chemical Industry 59: 191-202.
[39] Richardson, I. G. (2000). "The nature of the hydration products in hardened cement pastes" Cement and Concrete Composites 22: 97-113.
[40] Sakulich, A. R., and Li, V. C. (2011). "Nanoscale characterization of engineered cementitious composites (ECC)." Cement and Concrete Research 41: 169-175.
[41] Scott, H., and Gray, T. (1939). "Relation between the Rockwell “C” and diamond pyramid hardness scales." Trans. ASM 27: 363-381.
[42] Shi, C.,Day, R. L. (1995). "A calorimetric study of early hydration of alkali-slag cements." Cement and Concrete Research 25: 1333-1346.
[43] Shi, C.,Day, R. L. (1996). "Some factors affecting early hydration of alkali-slag cements." Cement and Concrete Research 26(3): 439-447.
[44] Smith, R. L., and Sandly, G. E. (1922). "An Accurate Method of Determining the Hardness of Metals, with Particular Reference to Those of a High Degree of Hardness." Proceedings of the Institution of Mechanical Engineers 102: 623-641.
[45] Sneddon, I. N. (1965). "The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile." International journal of engineering science 3: 47-57.
[46] Struble, L., and Stutzman, P. (1989). "Epoxy impregnation of hardened cement for microstructural characterization." Journal of Materials Science Letters 8: 632-634.
[47] Swanepoel, J. C., and Strydom, C. A. (2002). "Utilisation of fly ash in a geopolymeric material." Applied Geochemistry 17: 1143-1148.
[48] Van Jaarsveld, J. G. S., Van Deventer, J. S. J.,Lorenzen, L. (1997). "The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications." Minerals Engineering 10(7): 659-669.
[49] Van Jaarsveld, J. G. S., Van Deventer, J. S. J.,Lorenzen, L. (2003)."The characterisation of source materials in fly ash-based geopolymers." Materials Letters 57: 1272-1280.
[50] Wang, S. D.,Scrivener, K. L. (1995). "Hydration products of alkali activated slag cement." Cement and Concrete Research 25: 561-571.
[51] Xu, H.,Van Deventer, J. S. J. (2000). "The geopolymerisation of alumino-silicate minerals." International Journal Minerals Process 59: 247-266.
[52] Xu, H., Van Deventer, J. S. J.,Lukey, G. C. (2001). "Effect of alkali metals on the preferential geopolymerization of stilbite/kaolinite mixtures." Industrial Engineering Chemical Research 40: 3749-3756.
[53] Zhou, H., Wu, X., Xu, Z., and Tang, M. (1993). "Kinetic study on hydration of alkali-activated slag." Cement and Concrete Research 23(6): 1253-1258.
[54] 代新祥、文梓芸 (2001). 土壤聚合物水泥. 新型建築材料. 北京. 6: 34-35.
[55] 姚廷穎 (2020). 不同養護環境下含低溫煆燒稻殼灰無機聚合物漿體之抗壓強度與體積穩定性研究. 營建工程研究所, 國立台灣科技大學. 碩士論文.
[56] 周侑婷 (2019). 以奈米壓痕技術探討C-S-H膠體之物化性. 營建工程研究所, 國立台灣科技大學. 碩士論文.
[57] 張鈞浩 (2018). 含低溫煆燒稻殼灰無機聚合物漿體之力學與乾縮性質. 營建工程研究所, 國立台灣科技大學. 碩士論文.
[58] 陳冠宇 (2010). 鹼激發爐石基膠體配比因子對其工程性質影響之研究. 營建工程研究所, 國立台灣科技大學. 碩士論文.
[59] 陳姵華 (2017). 含低溫鍛燒稻殼灰漿體之力學與耐久性質. 營建工程研究所, 國立台灣科技大學. 碩士論文.
[60] 黃兆龍 (2007). 混凝土性質與行為. 台北市, 詹氏書局.