研究生: |
蔡宜珊 Yi-Shan Tsai |
---|---|
論文名稱: |
微型鑽針芯厚光學檢測系統之研究 The Study of an Optical Inspection System for the Web Thickness of Micro-Drills |
指導教授: |
唐永新
Yeong-Shin Tarng 鄧昭瑞 Geo-ry Tang |
口試委員: |
修芳仲
Fang-jung Shiou 蔡明忠 Ming-jong Tsai |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2010 |
畢業學年度: | 98 |
語文別: | 中文 |
論文頁數: | 86 |
中文關鍵詞: | 微型鑽針 、光機電整合 、量測系統 、影像處理 |
外文關鍵詞: | Micro-Drills, Web Thickness, Opto-mechatronic Technology, Measurement System, Image Processing |
相關次數: | 點閱:345 下載:8 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
微型鑽針常用於印刷電路板微細孔的加工。鑽孔品質的優劣很大的部分取決於鑽針幾何特徵的精密程度。鑽針製造商為確保產品的品質,芯厚特徵的量測為品管檢驗的要項。本研究開發完成一套微型鑽針芯厚影像量測系統。此系統包含砂輪模組、運動平台、定位視覺模組及芯厚檢測視覺模組等部分,並透過電路控制整合各模組的動作流程。檢測的過程是先透過運動平台帶動鑽針到達工作位置,再利用定位視覺模組進行鑽針截面的定位。接著利用芯厚檢測視覺模組得到芯厚部位的影像,最後運用影像處理技術分析該截面的芯厚值。經由實驗得知本系統芯厚值量測誤差在3μm以內,而每根鑽針研磨四個斷面並量測芯厚值約僅耗時八分鐘。上述的結果驗證本研究成功的完成自動化檢測機台的開發。
Micro-drills are often used to produce the micro holes on printed circuit boards. The quality of the holes deeply depends on the variation of the geometric profile of the drills. In order to ensure the quality of products, the manufacturers of micro-drills usually define a high level inspection standard for the measurement of the web thickness. This work has developed an optical inspection system to measure the web thickness of micro drills. The system includes grinding wheel module, motion platform, optical positioning module and optical web thickness measurement module. The motors of those modules are integrated by an electrical control unit. The operation of this system starts from driving the motion platform into the workspace. The optical positioning module then drives the drill so that a pre-determined section of the drill is located at a specific position. Next, an image of the drill’s cross section was taken by the optical web thickness measurement module. Finally, the web thickness can be determined by a series of image processing techniques. The experimental data shows that the measurement error of the inspection system is less than 3μm, and the process to inspect four sections of a drill takes less than 8 minutes. The result demonstrates the success of the proposed optical inspection system.
[1]林姿君,“自動化光學檢測專業能力指標與課程發展之研究”,國立台灣科技大學機械工程研究所碩士論文,2009。
[2]楊錫杭、黃廷合,“微機械加工概論”,全華圖書,2008。
[3]產業趨勢,“印刷電路板產業-鑽針”,凱基投顧雙週刊,第347期,第7頁,2006。
[4]劉信宏,“我國電路板機械鑽孔機進口狀況”,工研院IEK系統能源組,2004。
[5]林定皓,“電路板機械加工技術”,台灣電路板協會,2007。
[6]李漢州,“利用振動以達高速切削運用在小徑孔鑽削之研究”,國立雲林科技大學機械工程研究所碩士論文,1998。
[7]陳維瀚,“微細鑽頭鑽削SUS 304不鏽鋼之鑽削力與鑽刃磨耗研究”,國立臺北科技大學製造科技研究所碩士論文,2005。
[8]陳興文,“電路板微鑽針鑽尖面幾何設計之高速鑽孔性能研究”,國立中正大學機械工程研究所碩士論文,2001。
[9]A. Trivedi, P. C. H. Liu, “Machine Vision Processing/Selection in Printed Circuit Board Manufacturing,” Proceedings of the Twenty-Ninth Southeastern Symposium on System Theory, pp.190-194, 1997.
[10]C. Han, K. Mazouz, N. Saravanan, “A Printed Circuit Board Inspection System Using Artificial Neural Network,” Proceedings SSST, pp.238-242, 1993.
[11]徐穀銘,“銑刀特徵值之機器視覺量測”,國立交通大學多媒體工程研究所碩士論文,2008。
[12]蕭裕昌,“應用影像量測技術於微小元件之外型尺寸量測之研究”,淡江大學航空太空工程研究所碩士論文,2004。
[13]C. N. Ramirez, R. J. Thornhill, “Automated Measurement of Flank Wear of Circuit Board Drills,” Journal of Electronic Packaging, Vol. 114, Issue 1, pp.93-96, 1992.
[14]官志忠,“PCB微型鑽頭電腦輔助檢測系統之研製”, 國立台灣科技大學機械工程研究所碩士論文,2000。
[15]C. K. Huang, C. W. Liao, A. P. Huang, Y. S. Tarng, “An Automatic Optical Inspection of Drill Point Defects for Micro-Drilling,” The International Journal of Advanced Manufacturing Technology, Vol. 37, pp.1133-1145, 2008.
[16]W. Zhang, Y. Peng, F. He, D.Xiong, “Drill Flank Measurement and Flank/Flute Intersection Determination,” International Journal of Machine Tools & Manufacture, Vol. 48, Issue 6, pp.666-676, 2008.
[17]黃正光,“複合式微型鑽針製造與檢測之研究”,國立台灣科技大學機械工程研究所博士論文,2007。
[18]台灣佑能,網址http://www.uniontool.com.tw/,2010。
[19]尖點科技,網址http://www.topoint.tw/tw/,2010。
[20]林敬智,“鑽針芯厚量測系統之研製”,國立台灣科技大學機械工程研究所碩士論文,2004。
[21]立川科技,網址http://www.tachikawa.com.tw/,2010。
[22]肯定科技,網址http://www.surevision.com.tw/,2010。
[23]陳一斌,“機電光整合”,全華圖書,2009。
[24]黃凱豐,“手機保護面板之自動化光學檢測系統”,國立台灣科技大學機械工程研究所碩士論文,2009。
[25]林姿君,“自動化光學檢測系統設計教育訓練手冊” 國立台灣科技大學機械工程系,2009。
[26]陳庭軒,“微型鑽針專用砂輪輪廓半徑量測最佳化方法”,國立台灣科技大學機械工程研究所碩士論文,2007。
[27]唐大侖、徐明景、許國基,“影像階調偏好模式的建立與預測”,台灣顯示科技研討會,2006。
[28]詮洲光電,網址http://www.onset.com.tw/,2010。
[29]上銀科技,網址http://www.hiwin.com.tw/,2010。
[30]郭興家、邱弘興,“機電整合”,高立圖書,1998。
[31]東方馬達,網址http://www.orientalmotor.com.tw/,2010。
[32]泰映科技,網址www.troy.com.cn/,2010。
[33]Renishaw Public Limited Company,Website http://www.renishaw.com/en/1030.aspx,2010。
[34]齊人鵬、解文法,“研磨技術”,中國砂輪公司,1992。
[35]美商國家儀器公司,網址http://www.ni.com.tw/,2010。