研究生: |
溫敏智 Min-chih Wen |
---|---|
論文名稱: |
FMEA與TRIZ理論應用在動力手工具問題與決策系統之研究 A Study of FMEA and TRIZ Theory Application to Power-Hand-Tool Problem and Decision System |
指導教授: |
林原慶
Yuan-Ching Lin |
口試委員: |
黃緒哲
Shiuh-Jer Huang 鍾清枝 none |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2006 |
畢業學年度: | 94 |
語文別: | 中文 |
論文頁數: | 146 |
中文關鍵詞: | 失效模式與效應分析 、創意問題解決理論 、動力手工具 |
外文關鍵詞: | FMEA, TRIZ, Power-Hand-Tool |
相關次數: | 點閱:438 下載:16 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本文在於發展一個動力手工具設計與製造過程之問題與知識管理工具的決策推論系統,其目的在於分析動力手具的故障問題,並提供解決的建議。本系統是採用本體論的概念將知識分類,再轉換成適合於推論引擎使用之工程資料庫。此外,利用FMEA(失效模式與效應分析)進行工程上的分析,以找出所有潛在的失效模式,及可能產生的後果,並利用TRIZ理論審視FMEA的建議措施,找出改善惡化項目的解決方法,最後再返回FMEA去審視此解決方法是否會引發其它的破壞模式,以提供使用者一個最完善的建議解決方法。
本系統不僅可獨立運作,更可連接其它系統或工程代理人,透過XML檔案傳輸機制,先將問題匯入系統中,經由系統分析,推論出最完善的解決方案,再藉由XML將分析的結果匯出,以提供使用者作參考。此外,本系統的TRIZ_動力手工具矛盾衝突矩陣表介面,記錄使用者每次所得到的建議最佳解決方法的次數,此功能可提供動力手工具之創新與研發的正確方向。
This thesis is to study and develop questions and answers decision system (Q&A system) for Power-Hand-Tool. The Q&A system proposed in this work can be applied to analyze breakdowns of Power-Hand-Tool and give us a perfect suggestion of solution. Domain knowledge classification is achieved by the concept of Ontology for this system, and then transform it to the engineering database. That can be applied to user interface to link using, then utilize FMEA (Failure Modes and Effect Analysis) to do the analysis on the project to finding out all potential Failure Modes, and the consequence that may be produced, and utilize TRIZ theory to examine the suggestion of FMEA to finding out the solution which worsens the project. Finally, returning to FMAE to examine this solution whether it causes other destructive modes , in order to offer a user a perfect suggestion of solution.
This Q&A system not only can operate independently but also link other systems or engineering agents. Through transfering mechanism of XML , we first enter a question into the system. It can be analysed by this system to get a perfect suggestion of solution, then the XML system can output the result for a user’s reference. Besides, this system of TRIZ_Power-Hand-Tool contradiction matrix’s interface keeps a record of the numbers that a user gets the perfect suggestion of solution each time. This function can offer us a direction of innovation and research in developing a Power-Hand-Tool.
參 考 文 獻
【1】周錫英、張起明,”實施失效模式、效應與關鍵性分析之功能、需求與步驟”,品質管制月刊,第30卷、第12期,pp. 75-83(民國83年)
【2】Grant, W., Handbook of Reliability Engineering and Management, McGraw-Hill Inc(1988)
【3】許盛堡,”建構一個QFD與FMEA之整合架構”,元智大學工業工程與管理學系碩士論文(民國90年)
【4】許芳勳、彭鴻霖,”失效模式、效應與關鍵性分析技術之發展與應用”,中華民國第二屆可靠度與維護度技術研討會論文集,pp. 169-174(民國86年)
【5】羅應浮,”專案管理的失效模式與效應分析”,中華大學工業工程與管理學系碩士論文(民國88年)
【6】MIL-STD-1629A, Military Standard Procedure for Performing a Failure Mode, Effects and Criticality Analysis, Department of Defense, Washington, DC(1980)
【7】Ford Motor Company, Potential Failure Mode and Effects Analysis, Instruction Manual(1988)
【8】張書文編譯、小野寺勝重原著,”實踐FMEA手法-提升產品或系統的可靠性、維護性、安全性”,財團法人中衛發展中心(民國90年)
【9】品士公司編譯,”美國三大汽車公司QS-9000 FMEA第三版手冊原著”,品士公司(民國90年)
【10】郭榮沛,”失效模式與效應分析及其應用案例研討”,機械工業雜誌,元月號,pp. 137-148(民國84年)
【11】簡志郎,”模糊理論與TOPSIS法於失效模式與效應分析之應用”,逢甲大學工業工程學系碩士論文(民國91年)
【12】科建顧問,”FMEA失效模式與效應分析”,訓練教材,科建管理顧問股份有限公司,(民國94年)
【13】Chrysler Corporation, Ford Motor Company, General Motors Corporation, Potential Failure Mode and Effects Analysis, Reference Manual, Second Edition. Feb(1995)
【14】Chrysler, Ford, General, and Plexus QS-9000 Training System, Potential Failure Mode and Effects Analysis(FMEA), Plexus Corporation(2000)
【15】何錦忠,”以風險分析為概念的失效模式與效應分析之發展與應用-以汽車零組件業之個案研究”,大葉大學資訊管理學系碩士論文(民國92年)
【16】陳世軸,”應用TRIZ方法建立手工具創新設計資料庫”,成功大學機械工程學系碩士論文(民國92年)
【17】曾德生,”自行車機械式碟型煞車創新設計方法研究”,中正大學機械工程學系碩士論文(民國89年)
【18】鄭勝隆,”以TRIZ輔助汽車內裝產品設計之研究”,大葉大學設計在職專班碩士論文(民國93年)。
【19】Savransky, Semyon D., Engineering of creativity:introduction to TRIZ methodology of inventive problem solving, CRC Press LCC(2000)
【20】J. Terninko, A. Zussman, B. Zlotin, Systematic innovation:an introduction to TRIZ, CRC Press LCC(1998)
【21】王仁慶,”TRIZ創新設計方法之改良研究”,成功大學機械工程學系碩士論文(民國90年)。
【22】D. W. Clarke, TRIZ:Through the Eyes of An American TRIZ Specialist-A Study of Ideation International, Inc.(1997)
【23】余亮,”模糊與TRIZ理論應用在CMP問題與決策系統之研究”,台灣科技大學機械工程學系碩士論文(民國94年)
【24】蕭咏今,”Tech Optimizer訓練教材Version 1.5”,勢流科技股份有限公司,(民國88年)
【25】莊錦賜,”如何導入TRIZ 創意技法以提升科技創造力”,經濟部工業局TRIZ 研討會,(民國90年)
【26】T.R. Gruber, A translation approach to portable ontology specifications, Knowledge Acquisition, Vol. 5, No. 2, pp.199-220(1993)
【27】B. Chandrasekaran, J. Josephson and V. Benjamins, What are ontologies, and Why do We need them? IEEE Intelligent System, Vol. 14, pp.20-26(1999)
【28】V. Sugumaran, V.C. storey, Ontologies for conceptual modeling:their creation, use, and management, Data&Knowledge Engineering, pp.251-271(2000)
【29】李建中,”本體論為基礎之電子化知識管理式-以國軍資訊組織導入12207與J2EE為例”(民國92年)
【30】K. J. Leonard, The development of a rule based expert system model for fraud alert in consumer credit, European Journal of Operational Research, Vol. 80, pp.350-356(1995)
【31】R. Singh, G. S. Sekhon, An expert system for optimal selection of a press for a sheet metal operation, Journal of Materials Processing Technology, Vol. 80, pp.131-138(1999)
【32】D. Y. Kim, J. J. Park, Development of an expert system for the process design of axisymmetric hot steel forging, Journal of Materials Processing Technology, Vol.101, pp.223-230(2000)
【33】A. S. Anagun, Selecting inventory models using an expert system, Computers ind. Engng, Vol. 33, Nos. 1-2, pp.299-302(1997)
【34】鄭書湧,”以專家系統應用在廠務監控系統之研究—以廢氣處理系統為例”,國立成功大學工學院工程管理專班碩士論文(民國92年)。
【35】曾明發,"管理資訊系統-第9章 電子企業決策支援系統",
中國科技大學企業管理系上課講義。
http://140.126.75.162/david/books/mis/Chap009.files/frame.htm
【36】清雲科技大學上課講義。
http://lib.cyu.edu.tw/learning/yplee/CHAP.D.ppt
【37】P. A. Manohar, S. S. Shivathaya, M. Ferry, Design of expert system for the optimization of steel compositions and process route, Expert System with Applications, Vol.17, pp.129-134(1999)
【38】J. H. Song and Y. T. Im, Expert system for the process sequence design of a ball stud , Journal of Materials Processing Technology , Vol. 89-90, pp.72-78(1999)
【39】S.Myung, S. Han, Knowledge-based parametric design of mechanical products based on configuration design method, Expert System with Application, Vol.21, pp.99-107(2001)
【40】S. H. Masood, A. Soo, A rule based expert system for rapid prototyping system selection, Robotics and Computer Integrated Manufacturing, Vol. 18, pp.267-274(2002)
【41】A. Er, R. Dias, A rule-based expert system approach to process selection for cast component, Knowledge-Based System, Vol. 13, pp. 225-234(2000)
【42】C. C. Liu, J. L. Chen, Development of Product Green Innovation Design Method, IEEE, pp. 168-173(2001)
【43】Y. J. Mao, C. H. Tseng, Case Studies In TRIZ:An Integrated String Shaft Lock for Motorcycles, http://www.triz-journal.com, pp. 1-6(1997)
【44】J. G. Lee, S. B. Lee, J. M. OH, Case Studies In TRIZ:FBC(Fluidized Bed Combustion)Boiler’s tube erosion, http://www.triz-journal.com, pp. 1-7(2002)