研究生: |
邱贊源 Tsan-yuan Chio |
---|---|
論文名稱: |
連續沖模板料設計之Pro/TOOLKIT程式設計開發 On the Development of Pro/TOOLKIT Program for Strip Layout of Progressive Dies |
指導教授: |
林清安
Ching-An Lin |
口試委員: |
向四海
none 賴景義 Jiing-Yih Lai |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2006 |
畢業學年度: | 94 |
語文別: | 中文 |
論文頁數: | 108 |
中文關鍵詞: | 電腦輔助設計 、沖程設計 、程式設計 、連續沖模 |
外文關鍵詞: | CAD, Strip Layout, Programming, Progressive Dies |
相關次數: | 點閱:273 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本論文旨在利用商用CAD軟體—Pro/ENGINEER的參數式尺寸及單一資料庫的特性,設計適用於連續沖模的電腦輔助沖程佈置系統,以提高沖模設計效率,縮短模具的開發週期。
本論文主要的研究工作包括︰(1)自動化板金成品折彎展開與填孔,(2)最佳板料使用率計算,(3)自動建構空白板料,(4)板料沖孔加工佈置,(5)板料剪邊加工佈置,(6)板料折彎加工佈置。
在系統開發方面,本研究使用Pro/TOOLKIT及Visual C++ 之MFC為核心程式,開發一套視窗環境下的操作軟體,並以實例驗證其可行性。
The objective of this research is to develop a computer-aided system for layout of strips and manufacturing operations of progress dies. By taking the advantages of parametric dimensioning and single database of Pro/ENGINEER, the system will improve the work efficiency and reduce the cycle time of die design.
The work and proposed methology of this research include: (1) automatic unbending of a sheet metal part and automatic hole-filling, (2) optimizing the sheet metal utilization rate, (3) automatic generation of the blank strip, (4) strip layout for punching operations, (5) strip layout for notch operations, (6) strip layout for bending operations.
In addition to proposing the methodology for strip and layout planning, this research uses MFC of Microsoft Visual C++ and Pro/TOOLKIT, the C-language-based customization toolkit for to develop a prototyping computer system. Various examples have also been tested to verify the feasibility of the proposed methodology and the developed system.
1.郭漢斌,「連續沖模之2D參數化設計」,國立臺灣科技大學機械工程研究所碩士論文,台北,2000。
2.戴偉翰,「彎形板金展開之3D CAD系統開發」,國立臺灣科技大學機械工程研究所碩士論文,台北,2003。
3.莊博文,「連續沖模之3D電腦輔助沖程佈置」,國立臺灣科技大學機械工程研究所碩士論文,台北,2003。
4.劉國彬,「連續沖模之3D電腦輔助板料與沖程佈置」,國立臺灣科技大學機械工程系碩士論文,台北,2004。
5.施啟田,「連續沖模之3D電腦輔助干涉檢測與製程動態模擬」,國立臺灣科技大學機械工程研究所碩士論文,台北,2002。
6.陳志文,「連續沖模之模座設計與動態模擬之Pro/TOOLKIT程式開發」,國立臺灣科技大學機械工程研究所碩士論文,台北,2005。
7.帝漢實業股份有限公司,連續沖模設計軟體DCP II 操作手冊,台北,帝漢實業股份有限公司,民國七十八年。
8.Parametric Technology Corporation, Progressive Die Extension Release 2.2 Reference Guide, PTC, Waltham, MA , USA , 2005.
9.3D QuickTools Inc., 3DQuickPress, Hong Kong, 2003.
10.EDS, white paper : NX Progressive Die Wizard, Texas, USA, 2005
11.Parametric Technology Corporation, Pro/ENGINEER® Pro/TOOLKIT User’s Guide, Release Wildfire 2.0, MA, USA, 2004
12.李世國, Pro/TOOLKIT程序設計,機械工業出版社,北京,2003。
13.張繼春, Pro/ENGINEER二次開發實用教程,北京大學出版社,北京,2003。
14.林清安,Pro/ENGINEER Wildfire2.0 板金設計,知城數位科技股份有限公司,台北市,2004。
15.Thomas Williams, gnuplot version 4.0, http://www.gnuplot.info, 2004
16.Ivor Horton, Beginning Visual C++ 6, Wrox Press, New York, 1998.
17.山口文雄,連續沖壓模具設計之基礎與應用,全華科技圖書股份有限公司,台北,2003。
18.王仰舒,模具設計,財團法人台北市徐氏基金會,台北,1980。
19.黃錦鐘,沖模結構設計圖解,全華科技圖書股份有限公司,台北,1990。