研究生: |
蔡春鴻 Chun-Hung Tsai |
---|---|
論文名稱: |
使用UV奈米壓印法製作抗反射與表面增強拉曼光譜之結構 Fabrication the structures for anti-reflection and surface enhanced spectrum by UV-nanoimprint method |
指導教授: |
林鼎晸
Ding-Zheng Lin |
口試委員: |
陳奕帆
周育任 |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2023 |
畢業學年度: | 111 |
語文別: | 中文 |
論文頁數: | 67 |
中文關鍵詞: | 奈米壓印技術 、高深寬比奈米結構 、物理鍍膜 、SERS |
外文關鍵詞: | Nano Imprint, High Aspect Ratio Nanostructures, Physical Coating, SERS |
相關次數: | 點閱:281 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
1. T. T. X. Ong, E. W. Blanch, and O. A. H. Jones, "Surface Enhanced Raman Spectroscopy in environmental analysis, monitoring and assessment," Sci. Total Environ. 720, 137601 (2020).
2. A. Arroyo-Cerezo, A. M. Jimenez-Carvelo, A. González-Casado, A. Koidis, and L. Cuadros-Rodríguez, "Deep (offset) non-invasive Raman spectroscopy for the evaluation of food and beverages – A review," LWT 149, 111822 (2021).
3. Y. Xu, P. Zhong, A. Jiang, X. Shen, X. Li, Z. Xu, Y. Shen, Y. Sun, and H. Lei, "Raman spectroscopy coupled with chemometrics for food authentication: A review," TrAC Trends Anal. Chem. 131, 116017 (2020).
4. D. Cui, L. Kong, Y. Wang, Y. Zhu, and C. Zhang, "In situ identification of environmental microorganisms with Raman spectroscopy," Environ. Sci. Ecotechnology 100187 (2022).
5. H. Yilmaz, D. Yilmaz, I. C. Taskin, and M. Culha, "Pharmaceutical applications of a nanospectroscopic technique: Surface-enhanced Raman spectroscopy," Adv. Drug Deliv. Rev. 184, 114184 (2022).
6. M. Fleischmann, P. J. Hendra, and A. J. McQUILLAN, "RAMAN SPECTRA OF PYRIDZNE ADSORBED AT A SILVER ELECTRODE," Chem. Phys. Lett. 26(2), 4 (1974).
7. T.-Y. Liu, H.-H. Wang, K.-T. Tsai, Y. Chen, Y.-H. Chen, Y.-C. Chao, H.-H. Chang, Y.-Y. Han, W.-N. Lian, C.-H. Lin, J.-K. Wang, and Y.-L. Wang, "A Nanotechnology Platform Based on Surface-enhanced Raman Spectroscopy for Rapid Detection of Microbes," 16(3), (2012).
8. M. Li, Y. Chen, W. Luo, and X. Cheng, "Demolding force dependence on mold surface modifications in UV nanoimprint lithography," Microelectron. Eng. 236, 111470 (2021).
9. W.-Y. Chang, K.-H. Lin, S.-Y. Yang, K.-L. Lee, and P.-K. Wei, "Fabrication of gold sub-wavelength pore array using gas-assisted hot embossing with anodic aluminum oxide (AAO) template," Microelectron. Eng. 88(6), 909–913 (2011).
10. M. Zhang, Q. Deng, L. Shi, A. Cao, H. Pang, and S. Hu, "Fabrication of high aspect ratio (> 100:1) nanopillar array based on thiol-ene," Microelectron. Eng. 149, 52–56 (2016).
11. M. Zhou, X. Xiong, B. Jiang, and C. Weng, "Fabrication of high aspect ratio nanopillars and micro/nano combined structures with hydrophobic surface characteristics by injection molding," Appl. Surf. Sci. 427, 854–860 (2018).
12. M. J. Choi, K. J. Cha, H. W. Kim, M.-H. Na, B.-K. Lee, W. Hwang, and D. S. Kim, "Microchamber/nanodimple polystyrene surfaces constructing cell aggregates fabricated by thermoset mold-based hot embossing," Microelectron. Eng. 110, 340–345 (2013).
13. S.-H. Hong, B.-J. Bae, H. Lee, and J.-H. Jeong, "Fabrication of high density nano-pillar type phase change memory devices using flexible AAO shaped template," Microelectron. Eng. 87(11), 2081–2084 (2010).
14. X. Liu, K. Li, J. Shen, and F. Gong, "Hot embossing of moth eye-like nanostructure array on transparent glass with enhanced antireflection for solar cells," Ceram. Int. 47(13), 18367–18375 (2021).
15. Y. E. Yoo, T. H. Kim, D. S. Choi, S. M. Hyun, H. J. Lee, K. H. Lee, S. K. Kim, B. H. Kim, Y. H. Seo, H. G. Lee, and J. S. Lee, "Injection molding of a nanostructured plate and measurement of its surface properties," Curr. Appl. Phys. 9(2), e12–e18 (2009).
16. L. Peng, B. Sheng, D. Wang, J. Shi, Z. Ni, and Y. Huang, "Soft mold of microlens arrays fabricated by surface self-assembly," Opt. Mater. 99, 109602 (2020).