本文運用Petri Net理論具有流程迴路及數學模式的功能，是一種圖形模式作為動態模擬與分析之工具，將Fuzzy ANP修正式模糊分析網路程序法評選出最佳方案的步驟，建構出Petri Net數據流計算流程圖，並建立LED立/桌燈的創研流程混和雲與創研流程架構。其中修正式Fuzzy ANP理論是透過專利關鍵字技術，擬定針對「LED立/桌燈」改善「立/桌燈整體結構」、「立/桌燈散熱性」、「LED燈源主體」的三項技術中，將方案A分為「立/桌燈散熱性+立/桌燈整體結構」、方案B分為「立/桌燈整體結構+ LED燈源主體」、方案C分為「立/桌燈散熱性+ LED燈源主體」，經由立/桌燈產品之相關文獻探討及各項專利，將伸縮桿、連接頭、散熱鰭片、散熱座、發光源、燈泡造型、燈罩為評選產品設計方案時重要的評估準則，進而計算出各方案之權重值，計算時需考慮各評估準則間內部的相互依存關係，其中複雜的內部相依關係及繁瑣的計算過程，如用一般的文字解說，很難在短時間內了解其中意義，故本文使用Petri Net數據流計算模式建立其流程圖，首先本研究經由位置權重概念計算出各準則之常態化數值，而這些常態化數值會一直被重複擷取，因此結合子網路概念，將修正式Fuzzy ANP權重值計算步驟(W1、W2、W3、W4)中需要重複擷取的常態化數值(Na…Ng)，以長方形虛線包覆，形成一個子網路標示，以便再次使用此數據流時，不必再增加步驟於流程圖上，可讓圖面較為乾淨俐落，以利使用者能很方便的分解該系統。接下來需經Fuzzy理論判定兩個常態化數值之差距位於何處，並轉換成相對應的重要尺度，再將方案內部相依重要尺度，經由Petri Net數據流計算模式所建構出的權重值計算流程圖，將每一個權重值計算步驟之數據來源、數據流向、數據結果，清楚建立於各步驟計算流程圖上，並將所計算出的各個權重值矩陣結果，再利用Petri Net數據流計算模式所建構出的超級矩陣的演算法確認各方案的優先權值，評選出最佳方案，如此可縮短創研時間，並將得到的新知識，輸入擴充至關聯式LED立/桌燈設計與製程相關之工程知識庫及專利知識庫。本研究以Petri Net數據流計算流程圖所具有之強大邏輯能力、數學模式建立功能及流程迴路功能，以單純的圖形符號及簡短的註解，將繁雜的計算流程與複雜的內部相依性，清楚表達於圖上，達到一目了然的優點，可讓使用者易於學習，並能更快速了解各步驟之意義。

The paper uses the functions of process loop and mathematical model possessed by Petri net theory, which is a graphical model serving as a tool for dynamic simulation and analysis. Modified fuzzy analytic network process (ANP) selects procedures for the best plan, constructs Petri net dataflow computation chart, and establishes innovation process hybrid cloud and innovation process structure for LED standing/desk lamp. As for Modified fuzzy ANP theory, through the technique of patent keywords, and focusing on three techniques of LED standing/desk lamp to be improved, namely overall structure of standing/desk lamp, heat dissipation of standing/desk lamp and main structure of LED light source, the paper divides Plan A into “heat dissipation of standing/desk lamp + overall structure of standing/desk lamp,” Plan B into “overall structure of standing/desk lamp + main structure of LED light source,” and Plan C into “heat dissipation of standing/desk lamp + main structure of LED light source.”After exploration of different references and patents about standing/desk lamp products, the study takes extendable rod, connector, heat dissipation fin, heat sink, light source, light bulb shape and lamp shade as the important evaluation standards for selection of product design plan, and further calculates the weight of each plan. In times of calculation, the study consider internal interdependence among different evaluation criteria. But for the complicated internal interdependence and tedious calculation process, if general description is made, it is very difficult to understand their meaning within a short period of time. Therefore, the study usesPetri net dataflow computation model to establish a flow chart. First of all, the study employs position weight concept to calculate the normalized value of each criterion.And theses normalized value will be used again and again, so the study combine the subnet concept,it define the form of subnet which the place with dataflow computation is in need to reuse on the Modified fuzzy analytic network process of calculates the weight steps, when the dataflow computation is used again, we wouldn’t add any steps on the flowcahart.It achieves the advantages of clear on the system flowchart, and understand easily for users.After that, fuzzy theory is used to determine where the differenceoftwo normalized value is located at, and convert it to be the corresponding importance scale. Through weight computation chart constructed by Petri net dataflow computation model, the importance scale of internal interdependence of a plan clearly establishes the data source, data flow path and data result of each weight computation step on each step of computation chart. For each of the calculated weight matrix result, usingthe algorithm of supermatrix constructed by Petri net dataflow computation model, prioritized weight of each plan is confirmed, and the best plan is selected. Thus, innovation time is shortened, and the acquired new knowledge can be entered and expanded to the related engineering knowledgebase and patent knowledgebase of relational LED standing/desk lamp’s design and manufacturing process.Making use of Petri net dataflow computation chart’s huge logical power, function of mathematical model establishment and function of process loop, thestudy employs pure graphical symbols and short explanations to express tedious computation process and complicated internal interdependenceon charts. It achieves the advantages of clear understanding at a glance,shortened learning time for users, and fast understanding of the meaning of each step.

[1]Shen, R.L.,Yang, C.Y. and Lee, J. H., “Analysis of the problem description in the Algorithm for Inventive Problem Solving using Petri nets”,Knowledge-Based Systems, Vol. 35, pp.290-303 (2012).
[2]Osswald, D., Gorges N. and Worn H., “Reactive Hand-Arm Coordination for a Humanoid Robot using Extended Petri-Nets” IEEE/ASME international conference, Issue 4-7, pp. 1-6 (2007).
[3]Liu, H., Jiang, Z. and Fung, Y.K.,“Modeling of Large-Scale Complex re-Entrant Manufacturing Systems by Extended Object-Oriented Petri Nets” International Journal of Advanced Manufacturing Technology,Vol.27, pp.190-204 (2005).
[4]Choi, I., Park, C. and Lee, C., “ATransactional Workflow Model for Engineering/Manufacturing Processes”, International Journal of Computer Integrated Manufacturing, Vol. 15, No.2, pp. 178-192 (2002).
[5]Grigorova, K., “Process Modelling using Petri Nets”, International Conference on Computer Systems and Technologies ,Sofia,
Bulgaria,(2003).
[6]Buhler, P. A. and Vidal, J. M., “Towards Adaptive Workflow Enactment Using Multiagent Systems”, Information Technology and Management , Vol. 6, Issue 1, pp. 61-87 ( 2005).
[7]Lee, K.H., “Hierarchical Reduction Method for Analysis and Decomposition of Petri Nets ”, IEEE Ransactions On Systems, Man, And Cybernetics, Vol. 15, N0. 2, pp. 272-280, March/April.(1985)
[8]張合，「乏晰理論及後傳播類神經網路在連續沖模設計之應用」，碩士論文，國立台灣科技大學機械工程學系，台北(1991)。
[9]黃文恕、梁高榮，「具不確定性因素之AHP輸送機專家系統設計」，碩士論文，國立交通大學工業工程研究所，新竹(1990)。
[10]Seiler, R.K., “Reasoning about Uncertainty in Certain Expert System :Implications for Project Management Applications, ” Project Management, Vol. 8, No. 1, pp.51-59, Feb. (1990).
[11]Lawrence, O.H. , “On the Devication of Membership for Expert System, ” Information Science, pp.39-52 (1986).
[12]陳家豪、賴恩裕，「模糊理論於結構最佳設計與模型建立之研究」，碩士論文，國立成功大學機械研究所，台南(1990)。
[13]Feng, D.Y., “Application of Fuzzy Decision-Making in Earthquake Research, ” Fuzzy Sets and System, pp.15-26 (1990).
[14]Shinji, U., “The Complementary Process of Fuzzy Medical Diagnosis and Its Properties, ” Information Science, Vol. 38, Issue 3, pp. 229-242 (1986).
[15]Partovi, F. Y., “An analytic model for locating facilities strategically”, The International Journal of Management Science, Vol. 34, Issue 1, pp. 41-55 (2006).
[16]杜瑞澤、徐傳瑛，「分析網路程序法運用於綠色產品開發之設計決策研究」，國立高雄師範大學，高雄師大學報，pp. 57-79，(2008)。
[17]Dağdeviren, M, Yuksel, İ., and Kurt, M., “A fuzzy analytic network process (ANP) model to identify faulty behavior risk (FBR) in work system” , Science Direct, Vol. 46, pp. 771-783 (2008).
[18]林吉仁，「應用Fuzzy DEMATEL與Fuzzy ANP建立供應商績效評估系統」，大華技術學院，第十一屆兩岸經貿暨管理國際學術研討會，(2010)。
[19]Li, Q.D. and Lee, E.S. “On Random α-Cuts”, Journal of Mathematical Analysis and Applications,Vol. 190, Issue 2, pp. 546-558, March.(1995).
[20]Goldfire Innovator, http://www.invention-machine.com/index.html.
[21]Liu, C. C. and Chen, J. L., “Development of Product Green Innovation Design Method,” Proceedings of EcoDesign : Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, pp.168-173. (2001).
[22]Liu, C. C. and Chen, J. L., “A TRIZ Inventive Product Design Method without Contradiction Information,” The TRIZ Journal, Paper No. 6, http://www.triz-journal.com (2001).
[23]Chang, H. T. and Chen, J. L., “An Approach Combining Extension Method with TRIZ for Innovative Product Design,” Journal of the Chinese Society of Mechanical Engineers, Vol. 25, No. 1, pp.13-22 (2004).
[24]Low, M. T., Lamvik, K. W. and Myklebust, O., “Manufacturing a green service: engaging the TRIZ model of innovation,” IEEE Transactions on Electronics Packaging Manufacturing, Vol. 24, Issue 1, pp.10-17 (2001).
[25]Chang, H.T. and Chen, J. L., “The Conflict-Problem-Solving CAD Software Integrating TRIZ into Eco-Innovation,” Advances in Engineering Software, Vol.35, Issue 8-9, pp. 553-566 (2004).
[26]Wang, H., Chen, G., Lin, Z. and Wang, H., “Algorithm of Integrating QFD and TRIZ for the Innovative Design Process,” International Journal of Computer Applications in Technology, Vol.23, Issue 1, pp. 41-52 (2005).
[27]Tong, L. H., He, C. and Shen, L., “Automatic Classification of Patent Documents for TRIZ Users,” World Patent Information, Vol.28, pp. 6-13 (2006).
[28]Terninko, J., ”The QFD, TRIZ and Taguchi Connection : Customer– Driven Robust Innovation,” The Ninth Symposium on Quality Function Deployment, Michigan, pp. 374-380, June (1997).
[29]Leon-Rovira, N. and Aguayo, H., “A new Model of the Conceptual Design Process using QFD/FA/TRIZ,” The TRIZ Journal. http://www.triz-journal.com/, July. (1998).
[30]Apte, P. R. and Mann, D. L., “Taguchi and TRIZ: Comparisons and Opportunities,” The TRIZ Journal, http://www.triz-journal.
com/, November. (2001).
[31]Mann, D. L., “Assessing the Accuracy of the Contradiction Matrix For Recent Mechanical Inventions,” The TRIZ Journal, http://www.triz-journal.com/, (2002).
[32]Fey, V. and Rivin, E., Innovation on Demand: New Product Development Using TRIZ, CambridgeUniversityPress, UK,(2005).
[33]Savransky, S. D., Engineering of Creativity –Introduction to TRIZ Methodology of Inventive Problem Solving,CRC Press, New York, (2000).
[34]鄭振興，「利用知識工程技術進行支撐結構設計評估與設計改善之研究」，博士論文，國立台灣科技大學機械工程學系，台北 (2011)。
[35]黃浩誠，「應用改良之TRIZ理論結合QFD於補償式化學機械拋光終點偵測及補償路徑之改善」，碩士論文，國立台灣科技大學機械工程學系，台北(2007)。
[36]Chapman, C. B.and Pinfold, M., “Design Engineering-Aneed to Rethink the Solution Using Knowledge Based Engineering” Knowledge-Based Systems,Vol. 12, pp. 257-267 (1999).
[37]Jones, P. L.and Harrison, A., “The Application of Knowledge-BasedTechniques to the Monitoring of Computers in a Large Heterogeneous Distributed Environment”,Knowledge-Based Systems, Vol. 19, pp. 565-575 (2006).
[38]Miyamoto, S., Nonoguchi, S., Matsuno, J.and Matsumura, T.,“Application of Knowledge Based Modeling to Detail Structure Design for Shipbuilding”, ICCAS 2002 , pp. 717-729 (2002).
[39]Codd, E. F., “A relational model of data for large shared data banks”, Communications of the ACM, Vol. 13, No. 6, pp. 377-387 (1970).
[40]Codd, E. F., The Relational Model for Database Management: Version 2 ,Addison-WesleyLongman Publishing Co, Boston, (1990).
[41]Xu, X., “From cloud computing to cloud manufacturing”, Robotics and Computer-Integrated Manufacturing, Vol.28, Issue 1, pp. 75-86 (2012).
[42]Li, R. , Cao, J. and Bourgeois, J., “Agent Based Quality Management Middleware for Context-Aware Pervasive Applications”, 7th International Conference on Advances in Grid and Pervasive Computing, Wuhan, Hubei, China , Vol. 7296, pp. 370-376 (2012) .
[43]Popovic, K., and Hocenski ,Z., “Cloud Computing Security Issues and Challenges”, MIPRO 2010 - 33rd International Convention on Information and Communication Technology, Electronics and Microelectronics, Opatija, Croatia , pp. 344-349 (2010).
[44]陳淙穎，「結合雲端運算概念與Petri Net理論應用在LED閱讀燈創研流程分析及相關知識庫建立」，碩士論文，國立台灣科技大學機械工程學系，台北(2013).
[45]Petri, C.A. Kommunikation mit Automaten . Schriften des Rheinisch-Westfalischen Institutes fur Instrumentelle Mathematik an der Universitat Bonn Nr. 2, (1962).
[46]Peterson, J.L. , Petri Net Theory and the Modeling of Systems ,
Prentice Hall Inc. NJ, USA. (1981).
[47]Tadao Murata,” Petri Nets: Properties, Analysis and Applications”
,Proceedings of The IEEE, Vol.77, No.4, pp. 541-580, April.(1989).
[48]張元斌，「STRPN─多媒體時空關係展示延伸型PetriNet模式」，碩士論文，國立中央大學資訊管理學系 (1998)。
[49]WFMC,The Workflow Management Coalition Specification, Workflow Management CoalitionTerminology and Glossary, Document Number WFMC-TC-1011, Document Ststus-Issue 3.0, Workflow Management Coalition,U.K., Feb.(1999).
[50]李允中、王小璠、蘇木春，模糊理論及其應用，全華，台北(2012)
[51]Saaty,T.L.and Takizawa,M., “Dependence and independence: From linear hierarchies to nonlinear networks,”European Journal of Operational Research, Vol. 26,Issue 2 , pp. 229-237 (1986).
[52]「雲端運算的定義第十五版」，美國國家技術標準局(2009/7/10)
[53]Ranjan, A., Kumar, R. and Dhar, J.,“A Comparative Study between Dynamic Web Scripting Languages”, Second International Conference, ICDEM 2010, Tiruchirappalli, India, pp. 29-31, July. (2010).
[54]Enderlin, I., Dadeau, F., Giorgetti, A. and Othman, B. A., “Praspel: A specification language for contract-based testing in PHP”,Lecture Notes in Computer Science,Vol. 7019, pp. 64-79 (2011).
[55]連方進，「應用代理人行為模式於質子交換模燃料電池創研流程及關聯式工程與專利知識庫改善」，碩士論文，國立台灣科技大學機械工程學系，台北(2009).
[56]Date, C. J.,An introduction to database system, Addison-Wesley Inc, USA., pp.445-464 (1997).
[57]張瓊誼，物件導向換資料庫系統之應用與研究，台中商專學報，第26 期，(1994).
[58]Lin, Z. C.and Chen, C. C., “Innovation Procedure for Polishing Times Calculations of Compensated CMP Using Multiple Steps of the Modified TRIZ Method”,International Journal of Innovative Computing, Information and Control, Vol.5, No.8, pp. 2311-2332 (2009).
[59]黃志銘，「LED水族燈之結構與散熱改良研究」，國立台灣科技大學機械工程學系，碩士論文，台北(2012)。
[60]訊技科技，TracePro快速學習手冊，五南出版社，台北(2008) 。
[61]McGlen, R.J. , Jachuck, R.and Lin, S. “Integrated Thermal Management Techniques for High Power Electronic Devices,” Applied Thermal Engineering, Vol. 24, Issue 8-9, pp. 1143-1156 (2004).