研究生: |
黃英傑 Ying Chieh-Huang |
---|---|
論文名稱: |
具側壁與底部清潔功能之小型水下清潔機器人之開發 Development of the Small - scale Underwater Cleaning Robot With the Functions of Cleaning Glass and Bottom |
指導教授: |
鄭逸琳
Yih-Lin Cheng |
口試委員: |
郭振華
none 郭重顯 none |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2016 |
畢業學年度: | 104 |
語文別: | 中文 |
論文頁數: | 119 |
中文關鍵詞: | 水下清潔機器人 、積層製造 、APP |
外文關鍵詞: | Cleaning robot, Additive Manufacturing, APP |
相關次數: | 點閱:623 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
目前中大型水族箱與水下展場由於清潔難度高,因此多以人工清潔為主,而市售的清潔機器人都只具有單一的清潔功能,其它類型的水下清潔機器人,例如:游泳池、船體清潔機器人也不可直接應用於此,故需適當的小型水下清潔機器人以滿足中大型魚缸之清潔需求。本研究開發出具側壁與底部清潔功能的小型水下清潔機器人,以智慧型裝置APP無線遙控機器人,使機器人在水中可自由地移動。
本研究機器人主要由四大模組所組成,當中包含:側壁清潔模組、底部清潔模組、移動模組與控制模組。為了改善機器人只有單一清潔功能的狀況,本研究開發出適合清潔中型水族箱的側壁清潔模組,透過模組內部的捲尺升降機構,帶動負責清潔玻璃側壁的電動刷頭,做出高度升降比的上下清潔動作。底部清潔模組則是延續前一代海螺型魚缸底部清潔機器人之設計,透過構造的改良,減少模組的體積。移動模組是使用高自由度的Mecanum Wheels作為驅動方式,配合防水微動開關,讓機器人在清潔側壁的同時可準確地貼合側壁。使用者可在APP選擇手動控制機器人亦可進入自動清潔模式,智慧型裝置將發射藍牙訊號給外部控制盒,外部控制盒將訊號轉換成無線電的型式,再傳達給水下清潔機器人,由無線遙控的方式,使機器人的移動更加暢行無阻。本研究機器人的零組件是透過積層製造技術中的ProJet、FDM所加工完成,在組裝成各個模組並進行防水測試後,將各模組互相整合即完成本研究之機器人,最後進行整合性的水下測試,達到自動清潔側壁與底部之功能。
Nowadays, the large aquariums are still cleaned by manual, because of the difficulty of cleaning. Commercial type cleaning robots have only single cleaning function, but other type of underwater cleaning robot cannot be used in this field, such as vessel or swimming pool cleaning robots. So it needs a appropriate small-scale underwater cleaning robot to clean medium and large aquariums. The purpose of this research is to develop a small - scale underwater cleaning robot with the function of cleaning glass and bottom, through operated wireless technology by an APP on mobile devices. The underwater cleaning robot can roam in the water freely without cables.
In this research, the robot can be divided into four main modules: glass cleaning module, bottom cleaning module, moving module and control module. In order to improve the single cleaning function, this research develop the glass cleaning module which apply to the middle aquariums. Through tape spring mechanism inside the module activate the electric brush moving up and down in a wide range. The bottom cleaning module is based on the design of last generation “Conch shaped underwater aquarium bottom cleaning robot”. Improving the mechanism, we reduce the volume of the module. Mecanum wheels and limit switches are adopted for the moving module to match the glass when the robot is cleaning the glass. User can use the APP to choose manual or automatic mode. Mobile devices transmit Bluetooth signal to an external control box, then external control box transforms Bluetooth to a radio signal. Without cables, the robot can move unlimitedly. The parts of the robot are made by additive manufacturing technology, such as Projet and FDM. After assembling and water-proof test, integrate every parts to complete a robot. Finally, by function test under the water to achieve the function of cleaning glass and bottom.
【1】H. Shim , S.-Y. Yoo,H. Kang, B.-H. Jun, “Development of arm and leg for seabed walking robot CRABSTER200,” Ocean Engineering 2016, pp.55–67.
【2】S. Ishibashi, H. Yoshida, H. Osawa, T. Inoue, J. Tahara, K. Ito, Y. Watanabe, T. Sawa, T. Hyakudome, and T. Aoki, “A ROV ABISMO for the Inspection and Sampling in the Deepest Ocean and Its Operation Support System,” Oceans 2008 – MTS/IEEE Kobe Techno-OCEAN, pp. 1-6, 2008.
【3】T. Inoue, T. Katsui, J. Tahara, K. ITtoh, H. Yoshida, S. Ishibashi, and K. Takagi, “Experimental Research on Movability Characteristic of Crawler Driven ROV,” Oceans 2008, pp.1-6, 2008.
【4】T. Inoue, K. Takagi, and T. Shiosawa, “Flipper Type Crawler System for Running on the Irregular Seafloor,” Oceans 2010 IEEE – Sydney, pp. 1-4, 2010.
【5】N. Abaid, J. Bernhardt, J.A. Frank, V. Kapila, D. Kimani, M.Porfiri, “Controlling a robotic fish with a smart phone,” Proceedings of the Mechatronics, pp. 491-496, 2013.
【6】Sébastien Fontaine, Coublevie(FR), “Underwater vehicle for cleaning submerged surfaces,” US 20140116316A1.
【7】D. Souto, A. Faifia, F. Lopez-Pefia, R. J. Duro, “A new type of robot for underwater non-magnetic and complex hull cleaning,” IEEE International Conference on Robotics and Automation (ICRA), Karlsruhe, Germany, May 6-10, 2013.
【8】M. Lee, J.W. Park, S.-H. Park, J. Lee, S. Park, J.-G. Kim, Y. Hong, J. Suh, Y.- J. Lee, “An Underwater Cleaning Robot for Industrial Reservoirs,” 8th IEEE International Conference on Automation Science and Engineering, Seoul, Korea, August 20-24, 2012.
【9】Aquarium Specialty, http://www.robosnail.com/
【10】iRobot, http://www.irobot.com/
【11】T. Palleja, M. Tresanchez, M. Teixido, J. Palacin, “Modeling floor-cleaning coverage performances of some domestic mobile robots in a reduced scenario,” Robotics and Autonomous Systems, pp. 37-45, 2010.
【12】沈毓珊, “微小水下載具製作,” 國立臺灣科技大學機械工程研究所碩士論文, 2005.。
【13】賴佳宏, “微小潛水艇之設計與製作,” 國立臺灣科技大學機械工程研究所碩士論文, 2006.。
【14】張瑞東, “具觀測能力的無線遙控微小載具之研發,” 國立臺灣科技大學機械工程研究所碩士論文, 2007.。
【15】莊文鴻, “微小型水下清潔機器人之研發,” 國立臺灣科技大學機械工程研究所碩士論文, 2008.。
【16】鄭友昇, “小型水下清潔機器人之改良,” 國立臺灣科技大學機械工程研究所碩士論文, 2010.。
【17】林永澤, “創新型水下清潔機器人之研發,” 國立臺灣科技大學機械工程研究所碩士論文, 2010.。
【18】李榮哲, “具側壁清潔功能之微小型水下機器人研發,” 國立臺灣科技大學機械工程研究所碩士論文, 2012.。
【19】陳仲哲, “具底部清潔功能之水下機器人開發,” 國立臺灣科技大學機械工程研究所碩士論文, 2013.。
【20】藍閔諠, “互動式寵物烏賊機器人之開發,” 國立臺灣科技大學機械工程研究所碩士論文, 2013.。
【21】洪煜凱, “APP互動式烏賊機器人開發,” 國立臺灣科技大學機械工程研究所碩士論文, 2014.。
【22】邱得力, “小型海螺型魚缸底部清潔機器人之開發,” 國立臺灣 科技大學機械工程研究所碩士論文, 2015.。
【23】光聚合固化成型技術(Vat Photopolymerization), I. Gibson, D. W. Rosen, B. Stucker, “Additive manufacturing technologies,” Vol. 238. New York: Springer, 2010.
【24】材料擠製成型技術(Material Extrusion), I. Gibson, D. W. Rosen, B. Stucker, “Additive manufacturing technologies,” Vol. 238. New York: Springer, 2010.
【25】材料噴塗成型技術(Material Jetting). http://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/materialjetting/
【26】黏結劑噴塗成型技術(Binder Jetting), I. Gibson, D. W. Rosen, B. Stucker, “Additive manufacturing technologies,” Vol. 238. New York: Springer, 2010.
【27】粉體熔化成型技術(Powder Bed Fusion), I. Gibson, D. W. Rosen, B. Stucker, “Additive manufacturing technologies,” Vol. 238. New York: Springer, 2010.
【28】疊層製造成型技術(Sheet Lamination), http://www.lboro.ac.uk/research/amrg/about/the7categoriesofadditivemanufacturing/sheetlamination/
【29】指向性能量沉積成型技術(Directed Energy Deposition), I. Gibson, D. W. Rosen, B. Stucker, “Additive manufacturing technologies,” Vol. 238. New York: Springer, 2010.
【30】3D Systems, http://www.3dsystems.com/
【31】3D Systems, http://www.3dsystems.com/
【32】C. Y. Baldwin, K. B. Clark, “Design rules: the Power of Modularity, volume 1,” The MIT Press, 2000.
【33】鄭育明, “筆記型電腦產品研發的模組化設計之探討-以藍天電腦為例,” 臺灣科技大學工業管理研究所碩士論文, 2008.
【34】盧嘉泓、陳延暐(2010-03-12),老人福祉科技研究中心,元智大學, http://grc.yzu.edu.tw/
【35】顏鴻森, 吳隆庸, “機構學,” 東華書局.
【36】蔡智明(譯) (2011) , “材料力學,” 東華書局.
【37】App Inventor, http://appinventor.mit.edu/explore/