研究生: |
洪德一 De-yi Hong |
---|---|
論文名稱: |
鑽針芯厚自動化量測設備開發 Development of an Automated Web Thickness Measuring Equipment for the Micro-drills |
指導教授: |
唐永新
Yeong-Shin Tarng |
口試委員: |
蔡明忠
Ming-Jong Tsai 修芳仲 Fang-Jung Shiou |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2009 |
畢業學年度: | 97 |
語文別: | 中文 |
論文頁數: | 100 |
中文關鍵詞: | 非接觸式量測 、微型鑽針 、線掃瞄雷射 、共焦雷射 |
外文關鍵詞: | non-contact measurement, laser confocal displacement meter, laser micro gauge, micro-drills |
相關次數: | 點閱:207 下載:3 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本研究旨在研發鑽針芯厚自動化量測設備,並提出一套非破壞性且可適用於具有偏擺的鑽針芯厚量測方法。此設備主要是以運動控制及其資料擷取兩個架構,先以自動夾取裝置將鑽針放至量測的夾頭上,再配合雷射共焦量測儀與雷射微測儀對旋轉中的鑽針進行量測。最後將擷取到的鑽針外徑大小與外徑至芯厚之槽深距離進行分析,配合本研究所提之量測方法以獲得鑽針芯厚錐度之特性。此鑽針芯厚量測設備及其方法之研發,不僅改善傳統量測及其方法,配合上下料夾取裝置,使鑽針在量測的過程中不需要有人員駐守。因此,使用此自動化量測設備可以縮短檢測時間、避免人為誤判以及降低成本與人力,期以提升產業之競爭力。
The purpose of this research is to develop an automated equipment for measuring the web thickness of a micro-drill and to reduce runout error by the new measuring method. The automated measuring equipment’s structure is composed of a laser measurement system, a motion control module, a mechanical module and a program module. A Laser micro gauge and a laser confocal displacement meter are used to measure the micro drill’s out-diameter and the distance from the cutting edge to the web. An automatic clamp device is used to take micro-drills loading and unloading. Then the web thickness of a micro-drill can be analyzed by laser measurement system. It is shown that the measurement performances of the automated measuring equipment, such as: accuracy, flexibility, personnel cost and inspection time and greatly improved.
[1]B.K. Hinds, G.M. Treanor, "Analysis of stresses in
micro-drills using the finite element method",
International Journal Machine Tools & Manufacture
Machine Tools & Manufacture, pp.1443-1456, 2000.
[2]劉信宏,“我國電路板機械鑽孔機進口狀況”,工研院IEK系統
能源組,2004。
[3]J.M. Morrison, "Laser Review 10(11) ", pp.9-14,1995.
[4]D.M. Rincon, A.G. Ulsoy, "Complex geometry, rotary
inertia and gyroscopic moment effects on drill
vibrations", Journal of Sound and Vibration, pp.701-
715, 1995.
[5]尖點科技股份有限公司網站,
http://www.topointech.com.tw/index.htm。
[6]陳建人, "光機電系統整合概論", 財團法人國家實驗研究院,
2005。
[7]W.C. Chen, "Applying the finite element method to drill
design based on drill deformations", Finite Element in
Analysis and Design, pp.57-81,1997.
[8]C.K. Huang, L.G Wang, H.C. Tang, Y.S. Tarng, "Automatic
laser inspection of outer diameter, run-out and taper
of micro-drills", Journal of Materials Processing
Technology, pp.306-313, 2006.
[9]Y. Peng, H. Kumehara, W. Zhang, "Measurement of drill
point Geometry by using laser sensor", International
Journal of Machine Tools & Manufacture, pp.682-668,
2007.
[10]W. Zhang, Y. Peng, F. He, D.Xiong, "Drill flank
measurement and flank/flute intersection
determination", International Journal of Machine
Tools & Manufacture, pp.666-676, 2008.
[11]W, J. Zhang, D. Li, F. Ye, H. Sun, "Automatic Optical
Defect Inspection and Dimension Measurement of Drill
Bit", IEEE International Conference on Mechatronics
and Automation, 2006.
[12] Guifang Duan, Yen-Wei Chen, Takeshi
Sakekawa, "Automatic Optical Inspection of Micro
Drill Bit in Printed Circuit Board Manufacturing
Based on Pattern Classification", IEEE International
Instrumentation and Measurement Technology
Conference, 2008.
[13]黃昆文、何信芳,“機械鑽孔之深度控制及孔位精度之探
討”,電路板會刊,第四期,pp.21~28,1999。
[14]黃正光,“複合式微型鑽針製造與檢測之研究”,台灣科技大
學博士論文,2007。
[15]創國精密股份有限公司網站,http://www.tct-
tool.com.tw/news-body.htm。
[16]台灣佑能工具股份有限公司教育訓練課程,2003。
[17]林敬智,“針芯厚量側系統之研製”,台灣科技大學碩士論
文,2004。
[18]陳宣宇,“微型針芯厚量測系統於鑽針偏擺下之影響與改
善”,台灣科技大學碩士論文,2007。
[19]陳席卿,“雷射原理與光電檢測”,全華科技圖書公司,
1993。
[20]蔡明忠,“自動化感測與控制課程講義”,國立台灣科技大學
工程技術研究所,1997。
[21]范光照、張郭益,“精密量具及機件檢驗”,高立圖書有限公
司,1999。
[22]閰吉祥,“雷射原理與技術”,新文京開發出版,2007。
[23]日本東京光電子工業株式會社網站,http://www.toe.co.jp/。
[24]Keyence, Laser Confocal Displacement Meter Instruction
Manual, 2004.
[25]修芳仲,“精密量具與實習課程講義”,國立台灣科技大學機
械工程研究所,2003。
[26]NAKANISHI, "Motors & Spindles, Micro-grinders", 2008.
[27]坦聯企業,http://www.tanlian.tw/。
[28]北安實業,http://www.panix.com.tw。
[29]SMC速睦喜股份有限公司,http://www.smc.com.tw/。
[30]上銀科技,http://www.hiwin.com.tw/index.aspx。
[31]顏嘉男,“泛用伺服馬達應用技術”,全華,2006。
[32]伊日光編著,精準小型馬達技術,復漢出版社,1992。
[33]台達電子,“ASDA-AB系列進階泛用型伺服驅動器應用技術手
冊”,2009。
[34]朱朔嘉,“自動化量測與控制”,高立,2005。
[35]National Instruments, M Series User Manual, 2008.