研究生: |
黃國展 Guo-jan Huang |
---|---|
論文名稱: |
電腦輔助容差累積分析 Computer Aided Tolerance Stacks Analysis |
指導教授: |
鄧昭瑞
Geo-ry Tang |
口試委員: |
蔡志成
none 余志成 none 周碩彥 none |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2005 |
畢業學年度: | 93 |
語文別: | 中文 |
論文頁數: | 78 |
中文關鍵詞: | 尺寸鏈 、幾何容差 、容差累積 |
外文關鍵詞: | tolerance stacks, geometric tolerance, tolerance chain |
相關次數: | 點閱:252 下載:7 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本研究利用電腦輔助工具協助工程師對含幾何容差標註之工程圖面,進行容差累積與分析。研究的過程中首先探討零件與組合件含幾何容差標註時之尺寸鏈結情形。其次經由分析各種不同類型的容差累積路徑,嘗試建構一有系統的方式透過適當的搜尋法則推演相關的尺寸鏈。對於完整識別的尺寸鏈,建議使用最差法進行關鍵導出尺寸之容差累積分析。本研究所發展的人機介面,是在Visual Basic 6.0的視窗程式環境下結合SolidWorks API的操控技術撰寫而成。系統以SolidWorks環境下之實體模型為對象,自動擷取工程圖中之各項標註資訊,而後經由尺寸鏈迴路的搜尋與特徵形態完成容差累積之分析。
With the assistance of computer-aided design tools, this work studies the tolerance stacks analysis for the components with geometric tolerances applied to their features. The thesis first discusses the dimension chains associated with components and assemblies. The paths of tolerance stacking vary with the types of geometrical tolerances specified with the components. A systematically searching procedure is developed to identify the corresponding component loops from the drawing database as a close loop is specified. Next, the tolerance stacks are calculated by means of the worst case method.
This work provides an interface between computer solid models and design engineers who take responsibility for the tolerance analysis of the products. The software is developed under the environment of Visual Basic 6.0. In order to retrieve the data included in a SolidWorks drawing, the system deals with the objects such as the graphic entities and annotations stored in the database through API subroutines.
【1】 O. Bjorke, “Computer-Aided Tolerancing” , ASME Press, New York, 1989.
【2】 K. Whybrew, G. A. Britton, D. F. Robinson, and Y. S. Anuwat, “A Graph-Theoretic Approach to Tolerance Charting”, International Journal of Advanced Manufacturing Technology, Vol.5, pp.175-183, 1990.
【3】 R. O. Mittal, S. A. Irani, and E. A. Lehtihet, “Tolerance Control in the Machining of Discrete Components”, Journal of Manufacturing Systems, Vol.9, No.3, 1991.
【4】 李香娥、馬祥森, “線性尺寸鏈函數式的自動生成”,瀋陽航空學院,機械工程學系,瀋陽航空工學院學報,pp.1000-1385, 2001。
【5】 A. A. Requicha, “Toward A Theory of Geometric Tolerancing”, International Journal of Robotics Research, Vol.No.4, 1983, pp.45-60.
【6】 A. Krulikowski “Tolerance Stacks A Self-Study Course Volume 1 Student Manual”, Effective Training , 1992.
【7】 B. K. A. Ngoi, C. S. Tan and L. C. Goh, “Graphical Approach to Assembly Tolerance Stack Analysis-the ‘Quickie’ GDT Method”, Proceedings Institution Mechanical Engineers, Vol.211 Part B, 1997.
【8】 B. K. A. Ngoi and K. C. Cheong, “An Alternative Approach to Assembly Tolerance Stack Analysis ”, International Journal Production Research, Vol.36, No.11, pp.3067-3083, 1998.
【9】 B. K. A. Ngoi, L. E. N. Lim, A. S. Ong and B. H. Lim, “Applying the Coordinate Tolerance System to Tolerance Stack Analysis Involving Position Tolerance“, International Journal Advanced Manufacturing Technology, Vol.15, pp.404–408, 1999.
【10】 B. K. A. Ngoi2 , M. Agarwal2 and C. S. Chua2 ,“The Generic Capsule Approach to Tolerance Stack Analysis”, International Journal Production Research, Vol. 36, No.12, pp.3273- 3293, 1998.
【11】 B. K. A. Ngoi, B. H. Lim and A. S. Ong, “The Nexus Method for Evaluating Geometric Dimensioning and Tolerancing Problems with Position Callout”, Proceedings Institution Mechanical Engineers, Vol.214, Part B, 1999.
【12】 B. K. A. Ngoi, B. H. Lim ,and P. S. Ang, “Nexus Method for Stack Analysis of Geometric Dimensioning and Tolerancing (GDT) Problems”, International Journal Production Research, Vol. 38, No.1, pp.21- 37, 2000.
【13】 E. E. Lin and H. C. Zhang, “Theoretical Tolerance Stackup Analysis Based on Tolerance Zone Analysis”, International Journal of Advanced Manufacturing Technology, Vol.17, pp.257–262, 2001.
【14】 陳冠宇,“在一BREP實體模型中尺寸、公差和形狀特徵的表達”,國立清華大學,工業工程研究所,碩士學位論文,1991。
【15】 張宗義,“計算機輔助公差設計系統表示法之發展”,國立中興大學,機械工程研究所,碩士學位論文,1995。
【16】 張景昇,“AutoCAD 實體模型之公差標註與分析自動化系統”,國立中興大學,機械工程研究所,碩士學位論文,1997。
【17】 王文瑋,“CAD環境下電腦輔助公差設計與分析系統”,國立中興大學,機械工程研究所,碩士學位論文,1998。
【18】 林俊明,“電腦輔助公差分析之研究”,私立大葉大學,機械工程研究所,碩士學位論文,2000。
【19】 Solidworks, “Solidworks Office training API Fundamentals”.
【20】 江洪、李仲興,“Solidworks 2003 二次開發基礎與實例教程”,電子工業出版社,2003。
【21】 池勇、葛中新、劉汀,“Solidworks二次開發方法的研究”,河南科技大學,機械系, 2003。
【22】 Solidworks, “SolidWorks API Help”, Solidworks (R) 2003.
【23】 Tecnomatix, “eM-TolMate”, Version 6.0,2002.
【24】 TASysWorks “TASysWorks 2003”.