研究生: |
鄭人福 Jen-Fu Cheng |
---|---|
論文名稱: |
TS16949中FMEA在安全氣囊上之案例研究 The Study FMEA in the TS16949 - A case Supplementary Restraint System |
指導教授: |
徐世輝
Shey-Huei Sheu |
口試委員: |
許總欣
Tsung-Shin Hsu 王國雄 Kuo-Hsiung Wang |
學位類別: |
碩士 Master |
系所名稱: |
管理學院 - 工業管理系 Department of Industrial Management |
論文出版年: | 2008 |
畢業學年度: | 96 |
語文別: | 中文 |
論文頁數: | 56 |
中文關鍵詞: | TS16949 、失效模式與效應分析 、安全氣囊 |
外文關鍵詞: | TS16949, Failure Mode and Effects, Supplem |
相關次數: | 點閱:263 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
失效模式與效應分析是TS16949中最主要的核心工具之ㄧ,其主要目的在於工程人員利用各式表格進行檢索,在產品進行開發設計之時,便利用嚴密的分析作業,預先陳列出所有系統可能發生的失效情形,以及其可能所造成的不良影響,從而進行針對性的預防措施以及解決方案,已期能達到確實的預防效果,確實降低產品發生失效所造成的成本。
本研究將介紹TS16949以及失效模式與效應分析,且分析實際個案-安全氣囊系統,在將失效模式與效應分析導入該系統進行運作,其後證實效模式與效應分析對安全氣囊系統有顯著的改善效益。
Failure Mode and Effects Analysis is one of main core tools in the TS16949, and it` is the important purpose to use FMEA forms to search information. When the product is in the design, handling analysis work seriously, listing all failures and bad effects in the system beforehand, and advances safeguard and solution plan. It can make preventive effect and decrease cost in failures assuredly.
In this research, introduction TS16949 and Failure Mode and Effect analysis (FMEA), analyses how to operate FMEA in actual example Supplementary Restraint System (SRS). It is significant improved effect that FMEA operate in the Supplementary Restraint System (SRS).
參考文獻
[1]. 林雅惠撰,『FMEA 與FTA 技術於可靠度應用之研究』,
國立台灣科技大學工業管理研究所碩士論文,1997.
[2]. 陳文彬撰,『推廣與傳統的失效模式與效應分析之比較-
以滅火器產品設計為例』,國立台灣科技大學工業管理研究所碩
士論文,2005.
[3]. 李芸菱撰,『FMEA運用在QS9000之個案研究:A case study of
FMEA appling in QS9000』,國立台灣科技大學工業管理研究所碩
士論文,2006.
[4]. 小野寺勝重著,張書文譯,『實踐FMEA手法』,1997.
[5]. 徐世輝著,『品質管理』,2006.
[6]. 香港生產力促進局,『ISO/TS 16949:2002汽車零部件工業
品質管理系統推行指引』,2005.
[7]. 陳耀茂著,『可靠性工程入門』,1989.
[8]. 品士公司,『ISO/TS 16949:2002 實施指南』,2003.
[9]. 科建顧問公司,『ISO/TS 16949 導入與簡介』,2005.
[10]. 詹慧中,『ISO/TS 16949 品質系統之流程管理與績效模式』,逢甲大學經
營管理研究所碩士論文,2007.
[11]. 黃振育 ,『ISO/TS 16949與TQM關聯之研究』,義守大學
管理研究所碩士論文,2007.
[12]. AIAG, Reference manual: potential failure mode and effects analysis
(FMEA). AIAG, USA, 1995.
[13]. AIAG, Production Part Approval Program PPAR, Chrysler, Ford, and
General Motors, 1999.
[14]. MIL-STD-1629A, Military Standard Procedure for Performing a
Failure Mode, Effects and Criticality Analysis, Department of
Defense, Washington, DC, 1980.
[15]. Jone, B., “Achieving Peak to Peak Performance Using QS 9000”.
IIE Solution, 29(1), 1997, pp.34-39.
[16]. McBride, J. and Schleicher E. “Failure Mode(s) and Effect(s)
Analysis (FMEA)”, McBride, Schleicher, & Associates, 2000.
[17]. AIAG(2003),「ISO/TS 16949 Technical Specification」.
[18]. DNV(2003). “汽車業品質管理系統新標準-ISO/TS
16949:2002”,2003 NewsletterNo. 2,March.
網站
http://www.iso.org/iso/home.htm
http://www.aiag.org/scriptcontent/index.cfm
http://www.hkpc.org/hkatkc/saehk/source/ts2_system_implementation_guidance.pdf
http://www.mycar168.comupload200804200842412534437.bmp
http://www.freepatentsonline.com7166032-0-large.jpg