研究生: |
林書逸 Shu-Yi Lin |
---|---|
論文名稱: |
全橋相移轉換器之整合式磁性元件設計 Integrated Magnetics Design on Full-Bridge Phase-Shifted Converter |
指導教授: |
邱煌仁
Huang-Jen Chiu |
口試委員: |
邱煌仁
Huang-Jen Chiu 謝耀慶 Yao-Ching Hsieh 林景源 Jing-Yuan Lin 鄭宏良 Hong-Liang Zheng |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電子工程系 Department of Electronic and Computer Engineering |
論文出版年: | 2017 |
畢業學年度: | 105 |
語文別: | 中文 |
論文頁數: | 86 |
中文關鍵詞: | 全橋相移轉換器 、鐵芯整合 、零電壓切換 |
外文關鍵詞: | Full-bridge phase-shifted converter, magnetic integration, zero-voltage switching |
相關次數: | 點閱:354 下載:6 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
全橋相移轉換器一般會外加諧振電感來讓電路在輕載時達成零電壓切換,因此電路當中的磁性元件包含了諧振電感、變壓器與輸出電感。然而這些磁性元件佔了大部分的體積空間,間接降低整體的功率密度。本論文主旨為研究如何利用鐵芯整合技術,將全橋相移電路當中的三種磁性元件整合至同一個鐵芯裡。藉由分析電路各個動作區間的交、直流磁通來求得各磁柱的磁通密度以避免鐵芯飽和。並且計算鐵芯整合後的等效區間電感以得知輸出電流漣波大小;除此之外,利用調整一、二次側線圈彼此之間的距離來調整漏感大小,以取代傳統全橋相移所外加的諧振電感。最後利用鐵芯整合技術實現一台輸入電壓380 V、輸出電壓12 V且輸出功率500 W的中心抽頭式全橋相移轉換器,將諧振電感、變壓器與輸出電感三種磁性元件整合至同一個鐵芯裡,藉此減少電路中的磁性元件數目。
Full-bridge phase-shifted converter sometimes adds external resonant inductor to achieve zero-voltage switching during light load condition. The magnetic components in the circuit include resonant inductor, transformer and output inductor. However, these magnetic components occupy a lot of space in the circuit which cause low power density. The thesis analyzes the integration of magnetic component which integrate these three magnetic components into one core. To derive the flux density and output ripple current, the thesis calculates the DC flux, AC flux and equivalent inductance during operation interval. By adjusting the distance between primary side winding and secondary side winding, the leakage inductor can be used to replace the resonant inductor. Finally, a 500 W full-bridge phase-shifted converter with 380 V input voltage, and 12 V output voltage is implemented by using integrated magnetic technology. Therefore, the resonant inductor, transformer and output inductor can be integrated into one core which can decrease the number of magnetic components in the circuit.
[1]J. G. Cho, J. A. Sabate, and F. C. Lee, “Novel full bridge zero-voltage-transition PWM DC/DC converter for high power applications,” IEEE APEC, 1994, pp.143-149.
[2]C. M. Wang, “A new family of zero-current-switching (ZCS) PWM converter,” IEEE Transactions on Power Electronics, vol. 52, no. 4, pp. 1117-1125, Aug. 2005.
[3]林景源,適合於大範圍負載變化之電源供應器研製,國立臺灣科技大學電子工程系研究所碩士論文,2003年。
[4]X. Ruan and F. Liu, “An improved ZVS PWM full-bridge converter with clamping diodes,” IEEE Transactions on Power Electronics, 2004, pp. 1476-1481.
[5]W. Chen, X. Ruan, and R. Zhang, “A novel zero-voltage-switching PWM full bridge converter,” IEEE Transactions on Power Electronics, vol. 23, no. 2, pp. 793-801, Mar. 2008.
[6]Z. Emami, M. Nikpendar, N. Shafiei, and S. R. Motahari, “Leading and lagging-legs power loss analysis in ZVS phase-shift full bridge converter,” Proc. PEDSTC, 2011, pp. 632-637.
[7]H. Lei, J. Guo, X. Jing, N. Mi, R. Chung, and S. Luo, “Design considerations for secondary side synchronous rectifier MOSFETs in phase shifted full bridge converter,” IEEE APEC, 2013, pp. 526-531.
[8]S. Lei, Z. J. Su, and Y. T. Chang, “Design and optimization of parallel DC-DC system based on current-driven phase shift full bridge converter,” IEEE APEC, 2014, pp. 2048-2053.
[9]P. Wong, Q. Wu, P. Xu, B. Yang, and F. C. Lee, “Investigating coupling inductors in the interleaving QSW VRM,” IEEE APEC, 2000, pp. 973-978.
[10]P. L. Wong, F. C. Lee, X. Jia, and D. V. Wyk, “A novel modeling concept for multi-coupling core structures”, IEEE APEC, 2001.
[11]P. Xu and F. C. Lee, “Design of high-input voltage regulator modules with a novel integrated magnetics,” IEEE APEC, 2001, pp. 112-115.
[12]R. Chen, F. Canales, B. Yang, P. Barbosa, J. D. van Wyk, and F. C. Lee, “Integration of electromagnetic passive components in DPS front-end DC/DC converter-a comparative study of different integration steps,” Proc. IEEE APEC, 2003, pp. 1137-1142.
[13]A. A. Aboulnaga and A. Emadi, “Simplified simulation and modeling technique for integrated magnetic components in power electronic converters,” in Proc. 26th Annu. INTELEC, 2004, pp. 725-730.
[14]W. Chen, G. Hua, D. Sable, and F. C. Lee, “Design of high efficiency, low profile low voltage converter with integrated magnetics,” IEEE APEC, 1997, pp. 15-21.
[15]A. Pietkiewicz and D. Tollik, “Coupled-inductor current-doubler topology in phase-shifted full-bridge dc–dc converter,” Proc. IEEE INTELEC, 1998, pp. 41-48.
[16]P. Xu, Q. Wu, P. L. Wong, and F. C. Lee, “A novel integrated current doubler rectifier,” IEEE APEC, 2000, pp. 735-740.
[17]P. Xu, M. Ye, and F. C. Lee, “Single magnetic push-pull forward converter featuring built-in input filter and coupled inductor current doubler for 48V VRM”, IEEE APEC, 2002, pp. 843-849.
[18]P. Xu, M. Ye, P. Wong, and F. C. Lee, “Design of 48-V voltage regulator modules with a novel integrated magnetics,” IEEE Trans. Power Electron., vol. 17, no. 6, pp. 990-998, Nov. 2002.
[19]J. Sun, K. F. Webb, and V. Mehrotra, “Integrated magnetics for current doubler rectifiers,” IEEE Trans. Power Electron., vol. 19, no. 3, pp. 582-590, Nov. 2004.
[20]H. Zhou, T. X. Wu, I. Batarseh, and K. D. T. Ngo, “Comparative investigation on different topologies of integrated magnetic structures for current-doubler rectifier,” IEEE PESC, 2007, pp. 337-342.
[21]X. L. Li, Y. H. Shin, J. S. Won, J. S. Kim, and H. B. Shin “Integrated Magnetic Transformer for ZVS Phase Shift Full Bridge Converter”, 電力電子學會,論文誌,第15卷,第2號,2010年,頁數:119-126。
[22]L. U. Zengyi, Y. Haijun, and Z. Alpha, “New magnetic integration of full-wave rectifier with center-tapped transformer” IEEE Trans. Power Electron, 2014.