研究生: |
陳怡霖 Yi-lin Chen |
---|---|
論文名稱: |
應用於電池管理系統之充電器開發 Development of a Charger for Battery Management System |
指導教授: |
羅有綱
Yu-kang Lo 邱煌仁 Huang-jen Chiu |
口試委員: |
林景源
Jing-yuan Lin |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電子工程系 Department of Electronic and Computer Engineering |
論文出版年: | 2014 |
畢業學年度: | 102 |
語文別: | 中文 |
論文頁數: | 105 |
中文關鍵詞: | 二階段定電流/定電壓充電 、返馳式轉換器 、準諧振 、鋰離子電池 、同步整流 |
外文關鍵詞: | two-stage constant-current/constant-voltage, flyback converter, synchronous rectification (SR), quasi-resonant (QR), Lithium-ion battery |
相關次數: | 點閱:326 下載:13 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
隨著電子設備的推陳出新,各類電池的應用發展已成為重要課題,其中鋰離子電池具有許多優點,如高容量、高功率密度、壽命長與無記憶效應等等,為現今主要發展之二次充電電池。但鋰離子電池於串聯應用上,因各顆電池之製作差異,在充放電過程中易造成電池失衡之現象。因此在串聯使用上,需要一個可應用於電池平衡系統之平衡充電器,以確保電池正常操作。
本論文旨在研製一鋰離子電池平衡充電器,可應用於電池平衡系統。電路架構為準諧振返馳式轉換器,採用波谷切換模式,並將二次側改為同步整流方式,以便有效提升效率。藉由模擬與理論分析,實作一台22.5 W之平衡充電器,輸入電壓為38 V至65 V,輸出電壓為4.5 V,低壓滿載效率可達86 %,並採用二階段定電流/定電壓之充電模式,以實現電池組的充電要求。
The market of electronic products changes so fast that batteries play an important role in the related area nowadays. One of the major rechargeable batteries is Lithium-ion battery, which features high energy capacity, high power density, long lifetime, and no memory effect. Lithium-ion batteries are connected in series to satisfy the high voltage demand. However, because of the mismatches in the manufacturing process, it may occur an imbalance problem among the batteries during the charging period. Therefore, a balance charger to maintain the normal operation of batteries is required for a battery management system (BMS).
This thesis aims to design a Lithium-ion battery charger which can be used in a BMS. To achieve this target, a quasi-resonant flyback DC/DC converter with secondary synchronous rectification to effectively reduce the loss and improve the converter efficiency is studied and designed. Finally a 22.5-W laboratory prototype is implemented and verified with theoretical analysis and simulations. The input voltage range is from 38 V to 65 V, and the output voltage is 4.5 V. A charging strategy with two-stage constant-current charging and one-stage constant-voltage charging is adopted. The efficiency achieves 86% at low input and full load condition.
[1] EPARC,電力電子學綜論,第二版,台北:全華圖書,2008年。
[2] 孫清華,最新可充電電池技術大全,第二版,台北:全華書局,2003年。
[3] M. Yoshio, R. J. Brodd, and Akiya Kozawa, Lithium-Ion Batteries Science and Technologies. New York: Springer, 2009.
[4] John Voelcker, “Lithium Batteries Take to the Road,” IEEE Spectrum, vol. 9, no. 9, pp. 26-31, Sept. 2007.
[5] 陳星光,應用於鉛酸電池之充放電系統研製,國立台灣科技大學電子工程系碩士論文,2012年。
[6] Jintae Kim, Chenghao Jin. 「避免電池容量失衡 電芯平衡技術延長鋰電池壽命」,新通訊元件雜誌,第147期,2013年。
[7] 綠能趨勢網,「什麼是BMS電池管理系統」,網址:http://www.energytrend.com.tw/knowledge/20120709-4584.html。
2012年7月9日。
[8] 梁適安,交換式電源供給器之理論與實務設計,第二版,台北:全華圖書,2008年。
[9] 鄭玉南,返馳式轉換器緩振電路研究,國立台灣科技大學電子工程系碩士論文,2003年。
[10] 鄭又元,具功因修正器之雙開關準諧振返馳式轉換器研製,國立台灣科技大學電子工程系碩士論文,2011年。
[11] 廖慶斌,具整合式變壓器之主動箝位零電壓切換返馳式轉換器,國立台灣科技大學電子工程系碩士論文,2014年。
[12] 陳彥捷,雙模式控制返馳式轉換器最佳化設計,國立台灣科技大學電子工程系碩士論文,2011年。
[13] 謝立晃,具初級側調節功能之數位式準諧振返馳式轉換器,國立台灣科技大學電子工程系碩士論文,2014年。
[14] 黃維德,用於LED驅動之單級返馳式PFC與雙級昇壓-返馳式轉換器實現,國立台灣科技大學電子工程系碩士論文,2012年。
[15] 林昕立,新型同步整流技術之研究,國立台灣科技大學電子工程系碩士論文,2013年。
[16] Allan Chiu, Quasi-Resonant Converter Synchronous Rectification MOSFETs are Critical to Design Success, Alpha & Omega Semiconductor, Taipei, 2009.
[17] Allan Chiu,中壓MOSFET的重要參數對二次側同步整流電路設計的影響,Alpha & Omega Semiconductor,Taipei,2010。
[18] ST Microelectronics, “L6561, Power Factor Corrector,” ST Microelectronics Datasheet of L6561, June 2004.
[19] ST Microelectronics, “L6561 Enhanced Transition Mode Power Factor Corrector,” ST Microelectronics Application Note AN966, March 2003.
[20] NXP Semiconductors, “TEA1791AT, GreenChip Synchronous Rectifier Controller,” NXP Semiconductors Datasheet of TEA1791AT, 2010.
[21] Application Handbook, “A-Core Ferrite Cores for Power Supply and EMI/RFI Filter,” A-Core Corporation, 2008.
[22] International Rectifier, “HEXFETR Power MOSFET,” International Rectifier Datasheet of IRFP4768PbF, 2009.
[23] FAIRCHILD, “N-Channel Power TrenchR MOSFET,” FAIRCHILD Datasheet of FDP047AN08A0, 2004.
[24] Infineon, “MOSFET Power Losses Calculation Using the Datasheet Parameters,” Infineon Application Note, 2006.
[25] ASTM Standard B 258-02, Standard specification for standard nominal diameters and cross-sectional areas of AWG sizes of solid round wires used as electrical conductors, ASTM International, 2002.
[26] C. Wm. T. McLyman, Transformer and inductor design handbook, 3rd ed. Idyllwild, CA: Marcel Dekker, Inc. 2004.
[27] 吳義利,切換式電源轉換器:原理與實用設計技術(實例設計導向),高雄:文笙書局,2012年。
[28] JACKCON, “LHK General Purpose, 105°C,” Application Handbook.