研究生: |
李昕 Hsin - Lee |
---|---|
論文名稱: |
應用三相電源之AC LED路燈照明影響研究 Research of Appling Three-phase power to AC LED Road Lighting |
指導教授: |
蕭弘清
Horng-Ching Hsiao |
口試委員: |
郭政謙
Cheng-Chien Kuo 楊瑞錶 Jui-Piao Yang 胡能忠 Neng-Chung Hu |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電機工程系 Department of Electrical Engineering |
論文出版年: | 2013 |
畢業學年度: | 101 |
語文別: | 中文 |
論文頁數: | 90 |
中文關鍵詞: | 發光二極體(LED) 、交流發光二極體(AC LED) 、三相電源 、矽控整流體(SCR) 、總諧波失真率(THD) 、閃爍率 |
外文關鍵詞: | LED, AC LED, 3-phase power source, Silicon Controlled Rectifier(SCR), Total Harmonic Distortion(THD), flickering |
相關次數: | 點閱:236 下載:1 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本研究主要針對目前全球研發核心焦點的LED路燈,研製以市電三相電源直接供電給LED路燈,省去降壓變壓器,但能夠達到簡化亮度控制電路之目的,並且運用LED本身良好的節能特性,達成節能減碳政策的要求。本論文以簡單的矽控整流體(SCR)完成整流調光電路,達成以最省的電子元件,完成實用可調光之LED路燈設計,可大幅提升LED路燈照明的可靠度,且具備市場的競爭力。
有鑒於交流發光二極體(AC LED)的高閃爍率和其所產生總諧波失真率(THD)的現象,本論文經由實驗去證明三相電源驅動的LED路燈較單相電源驅動的LED在閃爍率和總諧波失真方面皆能呈現較好的改善,而此研究成果也可作為道路照明運作之參考。
The study of developing LED road lighting that devising the three-phase power source to provide electricity from distribution system to AC LED for road lighting luminaire directly without step-down voltage transformers and simplify the controlled circuit configuration. Additionally, the LED is used for its energy-saving property and meeting the requirement of national energy-saving and carbon reduction policy.
The study completed a practical dimmable circuit for LED road lighting by using SCR to set up the rectifying circuit. The reliability and marketing competitiveness of LED have been improved to verify the practiveness.
Meanwhile, the experiments show that the flikering and total harmonic distortion(THD) of AC LED driven by three-phase power have been reduced than driven by single-phase power source. The result could be a guidence for the road lighting.
[1] 許樹源,「LED光電熱統一理論及LED對普遍照明的限制和前景」,香港城市大學,第三屆國際心光源和新能源論壇,上海,4月(2009)。
[2] 高英明,鄒念育,曹冠英,賀曉陽,李德勝,「AC LED光源的發光效率分析」,大連工業大學,海峽兩岸第十七屆照明科技與營銷研討會,福建,11月(2010)。
[3] Yimin Gu, Nadarajah Narendran, Tianming Dong and Huiying Wu, “Spectral and Luminous Efficacy Change of High-Power LEDs Under Different Dimming Methods”, Proc. of SPIE Vol. 6337J (2006).
[4] Ivan Moreno, Ulises Contreras, Rumen I, Tzonchev, “Cluster Configuration of Red , Green, and Blue LEDs for White Light Illumination”. Proc. of SPIE Vol.5739(2006).
[5] Masahiro Nishikawa, Yoichi Ishizuka, Hirofumi Matsuo, and Koichi Shigematsu “An LED Drive Circuit with Constant-Output-Current Control and Constant-Luminance Control”, INTELEC '06. 28th Annual International of Telecommunications Energy Conference, pp. 1-6 Sept. (2006).
[6] Yuqin ZONG, Pei-Ting CHOU, Min-Te LIN and Yoshi OHNO, “Practial Method for Measurement of AV-driven LEDs at a Given Junction Temperature by Using Active Heat Sinks”, Pro. of SPIE , Vol.7442, August (2009).
[7] His Chang, Yen-Shin Lai, “Novel AC Driver and Protection Circuits with Dimming Control for Light Emitting Diodes”, Conference Record of the Industry Applications Conference, pp.696-700, September.(2007).
[8] 林明德,「高功率AC LED 交流電壓驅動特性研究」,碩士論文,國立中央大學光電科學研究所,民國96年。
[9] Weifeng Feng, Yongzhi He, and Frank G. Shi, “Packaging and AC Powering of LED Array”, Electronic Components and Technology Conference (ECTC), pp.512~514, June. 2010.
[10] 顏重光,「AC直接驅動LED光源技術」,無線電技術月刊,第429期。
[11] David Brown, David Nicol, Ian Ferguson, “Investigation of the Spectral Properties of LED-based MR16 Bulbs for General Illumination”, Opt. Eng. Vol:44, (2005).
[12] Subramanian Muthu, Frank J. Schuurmans, Michael D. Pashley, “Red, Green, and Blue LED based White Light Generation: Issues and Control”. 37th IAS Annual Meeting. Record of the Industry Applications. (2003).
[13] Deurenberg. P, Hoelen. C, van Meurs. V, Ansems. J, “Achieving Color Point Stability in RGB Mulit-chip LED Modules Using Various Color Control Loops”, Proc. of SPIE Vol.5941,( 2005).
[14] Ackermann. B, Schulz. V, and Martiny. C, Hilgers. A, “Control of LEDs”, IEEE Conference Record of the Industry Applications Conference, Vol. 5, pp. 2608~2615, Oct. (2006).
[15] 劉冠顯,「應用LED混光技術於全日光模擬研究」,碩士論文,台灣科技大學電機工程研究所(2007)。
[16] 張心樺,「一般室內照明可調光LED驅動電路之研製」,碩士論文,台灣科技大學電子工程研究所(2011)。
[17] Coby S Wong, Nurban S Duzgoren-Aydin, Adnan Aydin, Ming Hung Wong, “Evidence of Excessive Releases of Metals From Primitive E-waste Processing in Guiyu, China”, .Environ Pollut. Jan 18.(2007).
[18] His-Hsuan Yen, Hao-Chung Kuo, and Wen-Yung YEH, “Characteristics of Single-Chi GaN-Based Alternating Current Light-Emitting Diode”, Applied Physics of the Japanese Journal, Vol. 47, pp. 8808~8810, Dec. (2008).
[19] Jashee CHO, Jaewook JUNG, Jung Hye CHAE, Hyungkun KIM, Hyunsoo KIM, Jeong Wook LEE, Sukho YOON, Cheolsoo SONE, “Alternating-current Light Emitting Diodes with a Diode Bridge Circuitry”, Applied Physics of the Japanese Journal, Vol. 46, pp. L1194~L1196, (2007).
[20] 李明峰,張占松,李雲蕭,云永利,王繼學,「AC LED 照明的效能分析」,G高工LED-技術應用 ISSN2151-982X,工業技術與資訊月刊,第22~48頁,第10期(2012)。
[21] 顏重光,「AC直接驅動LED光源技術」,無線電技術月刊,第429期。
[22] 林佩芬,「AC LED 電出新商機」,工業技術與資訊月刊,第198 期4月號(2008)。
[23] 陳文慶,「LED路燈適用於道路照明裝置高度之研究」,碩士論文,台灣科技大學電機工程研究所(2010)。
[24] 蘇俊傑,「高效率200瓦LED路燈驅動電源研製」,碩士論文,台灣科技大學電子工程研究所(2011)。
[25] 潘旭輝、牟同升,「光源的閃爍效應及閃爍的量測方法」,浙江大學現代光學儀器國家重點實驗室。
[26] 陳保仁,中華民國計量工程學會工研院技術報告,新竹,11月(2012)。
[27] 李明桐,「諧波電壓下照明閃爍之研究」,碩士學位論文,國立臺灣科技大學電機工程系(2002)。
[28] 蕭弘清,「照明閃爍測量評估方法與閃爍計設計及應用」,國立台灣 科技大學電機工程系博士論文 (1997)。
[29] 陳芃瑢,「多相電源對AC LED閃爍效應之理想研究」,碩士論文,台灣科技大學電機工程研究所(2011)
[30] http://www.aitek.tw/BIG5/appliance_thd.asp.(2012).
[31] Mohan, N. T. M. Undeland W. P. Robbins, “Power Electronics Converter, Application and Design”, Third Edition, Third Edition, John Eiley and Sons, Inc. (2011).
[32] http://www.autoaccuracy.com.tw/t_harmonic.htm. (2012).
[33] http://www.semiwill.com/products. (2012).
[34] Hadi Saadat, Power System Analysis, 2nd ed. (2004).
[35] 台灣電力公司網站,http://www.taipower.com.tw/. (2012).
[36] http://140.127.114.64/practises/1.1.1SCR/1.1.1SCR.htm. (2012).