簡易檢索 / 詳目顯示

研究生: 李承勳
Cheng-shiun LI
論文名稱: 電力電纜之熱效應與送電容量分析
Transmission Capacity and Thermal Effect Analysis of Power Cable
指導教授: 吳啟瑞
Chi-jui Wu
口試委員: 黃培華
Pei-hwa Huang
陸台根
Tai-ken Lu
辜志承
Jyh-cherng Gu
學位類別: 碩士
Master
系所名稱: 電資學院 - 電機工程系
Department of Electrical Engineering
論文出版年: 2007
畢業學年度: 95
語文別: 中文
論文頁數: 110
中文關鍵詞: 電力容量溫度熱導係數
外文關鍵詞: transmission capacity, temperature, thermal conductivity parameter
相關次數: 點閱:185下載:1
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 本論文探討地下電纜管路布設的最小間距,在符合台電系統送電容量規劃準則下,使用不同土壤熱導係數作為變數,找出兩排管路的最小間隔距離。並且評估管路與涵洞為抑低電力頻率磁場強度而使用金屬板屏蔽時,屏蔽前後對電力電纜送電容量的影響。應用有限原素法套裝軟體FLUX3D建立電力電纜模擬架構,分析各種涵洞與管路的溫度分布情況,計算出電力容量。由模擬結果可得電力電纜在各種架構中的溫升與溫度分布特性,而且屏蔽板對送電容量影響很輕微。


    The purpose of this thesis is to study the minimum interval of underground cable pipelines, According to the criterion of Taiwan power company about transmission capacity. Using the thermal conductivity parameter of different soil, it is to find the minimum distances of two rows of pipelines. If the pipeline and culvert use the shielding metal plates to reduce power-frequency magnetic field. It is to obtain the influence on the transmission capacity of power cables. The FLUX3D, a finite element based simulation tool, is used to establish the simulation models for power cables, analysis the distribution of temperature in different culvert and pipeline, and calculate the transmission capacity. From simulation results, it can get temperature rises and temperature distribution characteristic in various kinds of structure of power cables. It is negligible that the shielding board influences the amount of current carrying capacity.

    摘 要…………………………………………………………………………i ABSTRACT ii 誌 謝 iii 目 錄 iv 圖表索引 vi 第一章 緒論 1 1.1 研究背景 1 1.2 研究目的 2 1.3 章節概述 2 第二章 161KV地下電纜結構與模擬程式介紹 4 2.1 前言 4 2.2 地下XLPE電纜結構 5 2.3 有限元素法 8 2.4 模擬程式介紹 11 2.5 屏蔽鋁金屬板 11 第三章 相關熱傳遞理論 17 3.1 前言 17 3.2 傳導熱傳遞 17 3.3 熱導度 20 3.4 對流熱傳遞 21 3.5 輻射熱傳遞 22 3.6 一度空間穩態熱傳導 23 3.7 電力電纜的熱傳遞 32 3.8 本章結論 32 第四章 垂直排列地下管路間距與送電容量分析 39 4.1 前言 39 4.2 模擬分析的基本架構 39 4.3 土壤熱導係數 43 4.4 模擬結果 45 4.5 最小距離之經驗公式 63 4.6 本章結論 67 第五章 金屬屏蔽板對電力容量的影響 69 5.1前言 69 5.2送電容量模擬的基本架構 69 5.3 四回線垂直排列管路之送電容量分析 71 5.4 四回線方型排列管路之送電容量分析 79 5.5本章結論 92 第六章 地下涵洞之送電容量分析 96 6.1無金屬屏蔽 96 6.2 使用一字型鋁板屏蔽 100 6.3 本章結論 105 第七章 結論與未來研究方向 107 7.1 總結 107 7.2 研究成果 108 7.3 未來研究方向 108 參考文獻 109

    參考文獻

    [1] 張詩錦,地下電纜線路診斷技術,電機月刊,第七卷第十二期,pp.111-123,民國八十六年元月。
    [2] Schmill, J. V. , “Variable Soil Thermal Resistivity-Steady State
    Analysis,” IEEE Winter Power Meeting, New York, Jan. 1966.
    [3] 陳建富、朱慶隆、林順煌,「地下電纜周圍磁場減低對策」,電 機月刊,第四卷第十二期,pp.100-107,民國八十三年十二月。
    [4] G. G. Karady, C. V. Nunez, and R. Raghavan, “The Feasibility of Magnetic Field Reduction by Phase Relationship Optimization in Cable System,” IEEE Trans. on Power Delivery, Vol. 13, No. 2, pp.647-654, Apr. 1998.
    [5] D.R. Theron and R. Herman, “Modelling of maximum temperatures in aerial bundled cables feeding domestic loads using the beta probability distribution function,” 37(1996)221-230.
    [6] J. Nahman and M. Tanaskovic, “Determination of the current carrying capacity of cables using the finite element method,” 61(2002)109-117.
    [7] C. H. Chang and H. J. Yi, “Extensions to finite element method for thermal analysis of underground cable systems,” 64 (2003) 159-164.
    [8] 連裕豐,洞道中超高壓地下電力系統之設計,碩士論文,國立台灣科技大學,民國九十四年。
    [9] 賴要任、鐘國光,電機電子有限元素法,全華科技圖書股份有 限公司,民國七十七年。
    [10] FLUX3D Version 3.2 User’s Guide, MAGSOFT Corporation, 2000.
    [11] 林廣台、李世榮,熱傳遞,總經銷高立圖書公司,民國七十八年二月。
    [12] 萬鑫森,基礎土壤物理學,國立編譯館,茂昌圖書有限公司,民國七十六年二月。
    [13] 新建地下輸電線路埋深及配置設計準則,TSPD-SD-07-05,民國九十五年七月編定。
    [14] V. Domenico and V. Alfredo, “Transient tolerance analysis of power cables thermal dynamic by interval mathematic,” 77(2007)308-314.
    [15] 楊成發、楊金石,輸電地下電纜多回線管路共設時之送電容量研究,台電電力綜合研究所研究報告,民國九十二年。
    [16] 吳裕慶,金屬材料學,大中國圖書公司,民國六十六年。
    [17] 吳啟岳,板金材料,東大圖書有限公司,民國六十五年。

    無法下載圖示
    全文公開日期 本全文未授權公開 (校外網路)
    全文公開日期 本全文未授權公開 (國家圖書館:臺灣博碩士論文系統)
    QR CODE