研究生: |
吳志禹 Jhih-Yu Wu |
---|---|
論文名稱: |
開發應用於高安全性鋰離子電池之新穎具精準活化溫度之高分子添加助劑 Development of novel polymer additives with precise activation temperature for highly safe lithium ion battery |
指導教授: |
陳崇賢
Chorng-Shyan Chern |
口試委員: |
陳崇賢
Chorng-Shyan Chern 楊純誠 Chun-Chen Yang 范國泰 Quoc-Thai Pham |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 化學工程系 Department of Chemical Engineering |
論文出版年: | 2022 |
畢業學年度: | 110 |
語文別: | 中文 |
論文頁數: | 110 |
中文關鍵詞: | 鋰離子電池 、正極材料 、安全性 、添加劑 、寡聚物 |
外文關鍵詞: | Lithium-ion battery, cathode active materials, safety, additives, oligomers |
相關次數: | 點閱:393 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
1. Whittingham, M.S., Electrical energy storage and intercalation chemistry. Science, 1976. 192(4244): p. 1126-1127.
2. Mizushima, K., et al., LixCoO2 (0< x<-1): A new cathode material for batteries of high energy density. Materials Research Bulletin, 1980. 15(6): p. 783-789.
3. Tarascon, J.-M. and M. Armand, Issues and challenges facing rechargeable lithium batteries, in Materials for sustainable energy: a collection of peer-reviewed research and review articles from Nature Publishing Group. 2011, World Scientific. p. 171-179.
4. Feng, X., et al., Thermal runaway mechanism of lithium ion battery for electric vehicles: A review. Energy Storage Materials, 2018. 10: p. 246-267.
5. Pfleging, W., A review of laser electrode processing for development and manufacturing of lithium-ion batteries. Nanophotonics, 2018. 7(3): p. 549-573.
6. Manthiram, A., A reflection on lithium-ion battery cathode chemistry. Nature communications, 2020. 11(1): p. 1-9.
7. Tran, M.-K., et al., Comparative study of equivalent circuit models performance in four common lithium-ion batteries: LFP, NMC, LMO, NCA. Batteries, 2021. 7(3): p. 51.
8. Zhang, S.S., Problems and their origins of Ni-rich layered oxide cathode materials. Energy Storage Materials, 2020. 24: p. 247-254.
9. Wang, B., et al., Which of the nickel-rich NCM and NCA is structurally superior as a cathode material for lithium-ion batteries? Journal of Materials Chemistry A, 2021. 9(23): p. 13540-13551.
10. Liu, J., et al., Recent breakthroughs and perspectives of high-energy layered oxide cathode materials for lithium ion batteries. Materials Today, 2021. 43: p. 132-165.
11. Radin, M.D., et al., Narrowing the gap between theoretical and practical capacities in Li‐ion layered oxide cathode materials. Advanced Energy Materials, 2017. 7(20): p. 1602888.
12. Kucinskis, G., G. Bajars, and J. Kleperis, Graphene in lithium ion battery cathode materials: A review. Journal of Power Sources, 2013. 240: p. 66-79.
13. Liu, W., et al., Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries. Angewandte Chemie-International Edition, 2015. 54(15): p. 4440-4457.
14. Nitta, N., et al., Li-ion battery materials: present and future. Materials today, 2015. 18(5): p. 252-264.
15. Maleki Kheimeh Sari, H. and X. Li, Controllable cathode–electrolyte interface of Li [Ni0. 8Co0. 1Mn0. 1] O2 for lithium ion batteries: a review. Advanced Energy Materials, 2019. 9(39): p. 1901597.
16. Yu, H. and H. Zhou, High-energy cathode materials (Li2MnO3–LiMO2) for lithium-ion batteries. The journal of physical chemistry letters, 2013. 4(8): p. 1268-1280.
17. Xu, H., et al., Quantification of lithium dendrite and solid electrolyte interphase (SEI) in lithium-ion batteries. Journal of Power Sources, 2022. 529: p. 231219.
18. Mahmood, N., T. Tang, and Y. Hou, Nanostructured anode materials for lithium ion batteries: progress, challenge and perspective. Advanced Energy Materials, 2016. 6(17): p. 1600374.
19. Palacin, M.R., Recent advances in rechargeable battery materials: a chemist’s perspective. Chemical Society Reviews, 2009. 38(9): p. 2565-2575.
20. Wu, Y., E. Rahm, and R. Holze, Carbon anode materials for lithium ion batteries. Journal of power sources, 2003. 114(2): p. 228-236.
21. Zhang, H., I. Hasa, and S. Passerini, Beyond Insertion for Na‐Ion Batteries: Nanostructured Alloying and Conversion Anode Materials. Advanced Energy Materials, 2018. 8(17): p. 1702582.
22. Han, J.-G., et al., An electrolyte additive capable of scavenging HF and PF5 enables fast charging of lithium-ion batteries in LiPF6-based electrolytes. Journal of Power Sources, 2020. 446: p. 227366.
23. Aravindan, V., et al., Lithium‐ion conducting electrolyte salts for lithium batteries. Chemistry–A European Journal, 2011. 17(51): p. 14326-14346.
24. Hall, D.S., J. Self, and J. Dahn, Dielectric constants for quantum chemistry and Li-ion batteries: solvent blends of ethylene carbonate and ethyl methyl carbonate. The Journal of Physical Chemistry C, 2015. 119(39): p. 22322-22330.
25. Xing, L., et al., Deciphering the ethylene carbonate–propylene carbonate mystery in Li-ion batteries. Accounts of chemical research, 2018. 51(2): p. 282-289.
26. Huang, X., Separator technologies for lithium-ion batteries. Journal of Solid State Electrochemistry, 2011. 15(4): p. 649-662.
27. Francis, C.F., I.L. Kyratzis, and A.S. Best, Lithium‐ion battery separators for ionic‐liquid electrolytes: a review. Advanced Materials, 2020. 32(18): p. 1904205.
28. Jeong, H.-S., S.C. Hong, and S.-Y. Lee, Effect of microporous structure on thermal shrinkage and electrochemical performance of Al2O3/poly (vinylidene fluoride-hexafluoropropylene) composite separators for lithium-ion batteries. Journal of Membrane Science, 2010. 364(1-2): p. 177-182.
29. Jiang, X., et al., Novel ceramic-grafted separator with highly thermal stability for safe lithium-ion batteries. ACS Applied Materials & Interfaces, 2017. 9(31): p. 25970-25975.
30. Costa, C.M., M.M. Silva, and S. Lanceros-Méndez, Battery separators based on vinylidene fluoride (VDF) polymers and copolymers for lithium ion battery applications. Rsc Advances, 2013. 3(29): p. 11404-11417.
31. Venugopal, G., et al., Characterization of microporous separators for lithium-ion batteries. Journal of power sources, 1999. 77(1): p. 34-41.
32. Wu, M.-S., et al., Correlation between electrochemical characteristics and thermal stability of advanced lithium-ion batteries in abuse tests—short-circuit tests. Electrochimica acta, 2004. 49(11): p. 1803-1812.
33. Diouf, B. and R. Pode, Potential of lithium-ion batteries in renewable energy. Renewable Energy, 2015. 76: p. 375-380.
34. Zhu, J., T. Wierzbicki, and W. Li, A review of safety-focused mechanical modeling of commercial lithium-ion batteries. Journal of Power Sources, 2018. 378: p. 153-168.
35. Liu, S., L. Xiong, and C. He, Long cycle life lithium ion battery with lithium nickel cobalt manganese oxide (NCM) cathode. Journal of Power Sources, 2014. 261: p. 285-291.
36. Abraham, D., et al., Surface changes on LiNi0. 8Co0. 2O2 particles during testing of high-power lithium-ion cells. Electrochemistry communications, 2002. 4(8): p. 620-625.
37. Susai, F.A., et al., Improving Performance of LiNi0.8Co0.1Mn0.1O2 Cathode Materials for Lithium-Ion Batteries by Doping with Molybdenum-Ions: Theoretical and Experimental Studies. Acs Applied Energy Materials, 2019. 2(6): p. 4521-4534.
38. Sharifi-Asl, S., et al., Oxygen Release Degradation in Li-Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches. Advanced Energy Materials, 2019. 9(22).
39. Kim, U.-H., et al., Extending the battery life using an Al-doped Li [Ni0. 76Co0. 09Mn0. 15] O2 cathode with concentration gradients for lithium ion batteries. ACS Energy Letters, 2017. 2(8): p. 1848-1854.
40. Kim, U.H., et al., Compositionally Graded Cathode Material with Long-Term Cycling Stability for Electric Vehicles Application. Advanced Energy Materials, 2016. 6(22).
41. Zhou, F., X.M. Zhao, and J.R. Dahn, Synthesis, Electrochemical Properties, and Thermal Stability of Al-Doped LiNi1/3Mn1/3Co(1/3-z)AlzO2 Positive Electrode Materials. Journal of the Electrochemical Society, 2009. 156(4): p. A343-A347.
42. Watanabe, S., et al., Capacity fading of LiAlyNi1-x-yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (effect of depth of discharge in charge-discharge cycling on the suppression of the micro-crack generation of LiAlyNi1-x-yCoxO2 particle). Journal of Power Sources, 2014. 260: p. 50-56.
43. Kondrakov, A.O., et al., Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion Batteries. Journal of Physical Chemistry C, 2017. 121(6): p. 3286-3294.
44. Liu, H., et al., Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes. Nano Letters, 2017. 17(6): p. 3452-3457.
45. Xu, Z.R., et al., Chemomechanical behaviors of layered cathode materials in alkali metal ion batteries. Journal of Materials Chemistry A, 2018. 6(44): p. 21859-21884.
46. Myung, S.T., et al., Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives. Acs Energy Letters, 2017. 2(1): p. 196-223.
47. Fan, X.M., et al., Crack-free single-crystalline Ni-rich layered NCM cathode enable superior cycling performance of lithium-ion batteries. Nano Energy, 2020. 70.
48. Sun, H.H. and A. Manthiram, Impact of Microcrack Generation and Surface Degradation on a Nickel-Rich Layered Li Ni0.9Co0.05Mn0.05 O-2 Cathode for Lithium-Ion Batteries. Chemistry of Materials, 2017. 29(19): p. 8486-8493.
49. Ryu, H.H., et al., Microstructural Degradation of Ni-Rich Li NixCoyMn1-x-y O-2 Cathodes During Accelerated Calendar Aging. Small, 2018. 14(45).
50. Yang, H.P., et al., Simultaneously Dual Modification of Ni-Rich Layered Oxide Cathode for High-Energy Lithium-Ion Batteries. Advanced Functional Materials, 2019. 29(13).
51. Liu, H.M., et al., Towards an understanding of the role of hyper-branched oligomers coated on cathodes, in the safety mechanism of lithium-ion batteries. Rsc Advances, 2014. 4(99): p. 56147-56155.
52. Lin, C.C., et al., Investigation on suppressed thermal runaway of Li-ion battery by hyper-branched polymer coated on cathode. Electrochimica Acta, 2013. 101: p. 11-17.
53. Gabbott, P., Principles and applications of thermal analysis. 2008: John Wiley & Sons.
54. Vyazovkin, S., et al., ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data. Thermochimica acta, 2011. 520(1-2): p. 1-19.
55. Pham, Q.-T., et al., Mechanisms and kinetics of non-isothermal polymerization of N, N′-bismaleimide-4, 4′-diphenylmethane with barbituric acid in dimethyl sulfoxide. Thermochimica Acta, 2019. 676: p. 139-144.
56. Pham, Q.-T., et al., Kinetics of nucleation-controlled polymerization of N, N′-bismaleimide-4, 4′-diphenylmethane/barbituric acid. Thermochimica Acta, 2016. 641: p. 1-7.
57. Khawam, A. and D.R. Flanagan, Solid-state kinetic models: basics and mathematical fundamentals. The journal of physical chemistry B, 2006. 110(35): p. 17315-17328.
58. Rolph, M.S., et al., Blocked isocyanates: From analytical and experimental considerations to non-polyurethane applications. Polymer Chemistry, 2016. 7(48): p. 7351-7364.
59. Mühlebach, A., Pyrazoles—A novel class of blocking agents for isocyanates. Journal of Polymer Science Part A: Polymer Chemistry, 1994. 32(4): p. 753-765.
60. Wicks, D.A. and Z.W. Wicks Jr, Blocked isocyanates III: Part A. Mechanisms and chemistry. Progress in Organic Coatings, 1999. 36(3): p. 148-172.
61. Prime, R.B., et al., Thermogravimetric analysis (TGA). Thermal analysis of polymers: Fundamentals and applications, 2009: p. 241-317.
62. Kissinger, P.T. and W.R. Heineman, Cyclic voltammetry. Journal of chemical education, 1983. 60(9): p. 702.
63. Schweidler, S., et al., Investigation into mechanical degradation and fatigue of high-Ni NCM cathode material: a long-term cycling study of full cells. ACS applied energy materials, 2019. 2(10): p. 7375-7384.
64. Jiang, M., et al., A Review of Degradation Mechanisms and Recent Achievements for Ni‐Rich Cathode‐Based Li‐Ion Batteries. Advanced Energy Materials, 2021. 11(48): p. 2103005.
65. Ryu, H.-H., et al., Capacity fading of Ni-rich Li [Ni x Co y Mn1–x–y] O2 (0.6≤ x≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation? Chemistry of materials, 2018. 30(3): p. 1155-1163.
66. Wu, Y.S., et al., Coating of a Novel Lithium-Containing Hybrid Oligomer Additive on Nickel-Rich LiNi0. 8Co0. 1Mn0. 1O2 Cathode Materials for High-Stability and High-Safety Lithium-Ion Batteries. ACS Sustainable Chemistry & Engineering, 2022. 10(22): p. 7394-7408.