簡易檢索 / 詳目顯示

研究生: 翁伯凱
Po-kai Weng
論文名稱: 穿透器數位訊號處理模組電路設計與製作
Design and Fabrication of the Digital Signal Processor in a Penetrator
指導教授: 邱士軒
Shih-Hsuan Chiu
口試委員: 黃衡宇
none
邱顯堂
Hsien-Tang Chiu
彭勝宏
none
學位類別: 碩士
Master
系所名稱: 工程學院 - 材料科學與工程系
Department of Materials Science and Engineering
論文出版年: 2005
畢業學年度: 93
語文別: 中文
論文頁數: 96
中文關鍵詞: 辨識數位訊號處理器模組電路穿透器
外文關鍵詞: Distinguish., Digital Signal Processor, Group's Circuit, Penetrator
相關次數: 點閱:215下載:0
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

研究中針對穿透器模組電路的設計與製作,考慮穿透器模組電路內體積的重要性與功能性,參考德州儀器的數位訊號處理器(Digital Signal Processor, DSP)F2812晶片手冊,設計以DSP為核心的基本模組電路,規劃相關的穿透器模組電路,具有RS422通訊模組、記憶體模組、類比/數位訊號轉換模組等功能,並測試驗證各模組電路正確性,加以整合後有效辨識出穿透狀態,適合應用於穿透器內的專用模組電路。


In this paper, we propose design and fabrication of the group's circuit in a penetrator, consider the importance and functionality of the volume in the group's circuit in a penetrator, consult the digital signal processor(DSP) of the Texas Instrument F2812 chip manual, designs the basic group's circuit taking DSP as the core, plans the relevant group's circuit in a penetrator, have RS422 communication group's circuit, memory of storing group's circuit, analog/digital signal change group's circuit, etc. function, test and verify group's circuit exactness, distinguish out and pierce through the state effectively after integration, suitable for applying to the special-purpose group's circuit in a penetrator.

摘要I AbstractII 致謝III 目錄V 圖索引VIII 表索引XI 第一章、緒論1 1.1研究背景與文獻回顧1 1.1.1穿透飛彈2 1.1.2應用數位訊號處理器於智慧型攻堅引信之探討4 1.1.3智慧型引信相關設計製作7 1.1.4識別相關理論11 1.2研究動機與目的12 1.3論文架構15 第二章、DSP基本設計與實驗17 2.1 DSP晶片介紹17 2.1.1串列通訊介面18 2.1.2類比訊號轉換20 2.1.3中斷模組介紹22 2.1.4系統韌體24 2.2應用於穿透器DSP模組電路功能介紹26 2.3硬體設計流程與整體架構28 2.4電源電路31 2.5 DSP時脈電路35 2.6 JTAG通訊介面39 第三章、穿透器週邊電路設計與實驗42 3.1外部記憶體43 3.2 RS422串列通訊電路49 3.3 A/D電壓轉換電路53 3.4整合性DSP電路56 3.4.1同時擷取信號與原有電路比較之實驗59 3.4.2優缺點比較61 第四章、辨識法則與穿透辨識實驗62 4.1辨識流程62 4.2辨識法則-最小距離分類器63 4.2.1特徵抽取68 4.3穿透距離為辨識條件69 4.4辨識結果濾除的探討70 4.5應用最小距離分類器於整合性DSP電路之辨識實驗73 第五章、結論與未來展望77 5.1結論77 5.2未來展望77 參考文獻78 作者簡介82

1.黃衡宇,「智慧型攻堅引信關鍵技術整合先前研究報告」,民國90年。
2.Walz; Mark, Schoon, Richard J., “Explosively forged elongated penetrator”, U.S. Patent 5349908, September 27, 1994.
3.Parsons, Gary H., Glenn, Joseph Gregory, “Hard target penetrator with multi-segmenting casing cutter”, U.S. Patent 5698814, December 16, 1997.
4.Schmacker, Bruce E. , “Rocket-boosted guided hard target pnentrator”, U.S. Patent 6276277, August 21, 2001.
5.U.S. Patent S5255608, “Real-time identification of a medium for a high-speed penetrator”.
6.Stauers, Juris, Alfaro, Vincent R., “ Programmable fuze for projectile”, U.S. Patent 4237789, December 9, 1980.
7.Abt, Edgar J., Ramsey, Arlie A., “Fuze actuating system having a variable impact delay”, U.S. Patent 4580498, April 8, 1986.
8.Cesulka, John L., Williamson, Kenneth J., “Munitions success information system”, U.S. Patent 6453790, September 24, 2002.
9.Bruzzone, L., Roli, F., Serpico, S.B.Structured , “Neural networks for signal classification”, Signal Processing Volume: 64, Issue: 3, February, 1998, pp. 271-290.
10.Khandetsky, V., Antonyuk, I., “Signal processing in defect detection using back-propagation neural networks”, NDT and E International Volume: 35, Issue: 7, October, 2002, pp. 483-488.
11.Fantoni, P. F., Mazzola, A., “A pattern recognition-artificial neural networks based model for signal validation in nuclear power plants”, Annals of Nuclear Energy Volume: 23, Issue: 13, September, 1996, pp. 1069-1076.
12.Ciocan, R., Petulescu, P., Ciobanu, D., Roth, D.J., “The use of the neural networks in the recognition of the austenitic steel types”, NDT & E International Volume: 33, Issue: 2, March, 2000, pp. 85-89.
13.Dauce, Emmanuel, Quoy, Mathias, Cessac, Bruno, Doyon, Bernard; Samuelides, Manuel, “Self-organization and dynamics reduction in recurrent networks: stimulus presentation and learning”, Neural Networks Volume: 11, Issue: 3, April, 1998, pp. 521-533.
14.Serrano-Gotarredona, Teresa, Linares-Barranco, Bernabe, “A real-time clustering microchip neural engine”, Microelectronics and Reliability Volume: 37, Issue: 8, August, 1997, pp. 1285.
15.S. Senda, M. Minoh, I. Katsuo, “A fast algorithm for the minimum distance classifier and its application to Kanji character recognition”, Vol.1, pp.283 – 286(1995).
16.H. Lin, A.N. Venetsanopoulos, “A weighted minimum distance classifier for pattern recognition”, Vol.2, pp.904 – 907(1993).
17.C.A. Murthy, N. Chatterjee, B.U. Shankar, D.D. Majumder, “IRS image segmentation minimum distance classifier approach”, pp.781 – 784(1992).
18.李易儒,「多層介質即時辨識系統之研究─應用類神經網路」,碩士論文,台北,台灣科技大學,高分子工程研究所,民國92年。
19.彭啟忠,「以數位訊號處理器為基礎的多層介質穿透即時辨識系統之研究」,碩士論文,台北,台灣科技大學,高分子工程研究所,民國93年。
20.“TMS320F28x Serial Communication Interface(SCI) Peripheral Reference Guide”,Texas Instrument(2002).
21.“TMS320F28x Analog-to-Digital Converter(ADC) Peripheral Reference Guide”, Texas Instrument(2002).
22.探矽工作室,「2002嵌入式系統開發聖經」,民國91年。
23.“TPS767D301 Data Manual Reference Guide”,Texas Instrument(2004).
24.“TMS320F28x TMS320F28x Digital Signal Processors Data Manual Reference Guide”,Texas Instrument(2002).
25.“JTAG/MPSD Emulation Technical Reference”,Texas Instrument(1994).
26.“RS-422 and RS485 Application Note”,B&B Electronics(1997).
27. “eZdsp F2812 Technical Reference”, Spectrum Digital(2004).
28. “TMS320F28x Analog-to-Digital Converter(ADC) Peripheral Reference Guide”, Texas Instrument(2002).
29.Rafael C. Gonzalez, Richard E. Woods, “Digital Image Processing 2nd.”,pp.698 – 700(2003).

無法下載圖示 全文公開日期 本全文未授權公開 (校內網路)
全文公開日期 本全文未授權公開 (校外網路)
全文公開日期 本全文未授權公開 (國家圖書館:臺灣博碩士論文系統)
QR CODE