研究生: |
鍾瑋芯 Wei-Hsin Chung |
---|---|
論文名稱: |
鋰離子電池充電方法之評估 Evaluation of Charging Methods for Li-ion Batteries |
指導教授: |
劉益華
Yi-Hua Liu 羅一峰 Yi-Feng Luo |
口試委員: |
邱煌仁
Huang-Jen Chiu |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電機工程系 Department of Electrical Engineering |
論文出版年: | 2020 |
畢業學年度: | 108 |
語文別: | 中文 |
論文頁數: | 92 |
中文關鍵詞: | 鋰離子電池 、等效電路模型 、定電流定電壓充電法 、定損失定電壓充電法 、定功率定電壓充電法 |
外文關鍵詞: | Lithium-ion Battery, Equivalent Circuit Model, Constant Current-Constant Voltage, Constant Loss-Constant Voltage, Constant Power-Constant Voltage |
相關次數: | 點閱:538 下載:17 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
鋰離子電池因具高能量及高功率密度特性,適合使用於諸如攜帶式電子產品、再生能源系統及電動車等應用。由於充電方法會影響鋰離子電池之性能及循環壽命,因此發展高品質之充電策略是必要的,而高效能的充電策略需要具備充電效率高、電池溫升低、充電時間短且能延長電池的使用壽命等優點。
本文提出五種充電方法進行實現及研究,五種充電方法包含三種不同截止端電壓值之定電流定電壓充電法、定損失定電壓充電法及定功率定電壓充電法。本文會實現並比較前面提到之五種充電方法的性能,例如:充電效率、電池溫升、充電時間及循環壽命次數,提供實驗數據讓使用者能更有效率地選擇充電方法。
Lithium-ion (Li-ion) batteries have an unmatched combination of high energy and power density which make it the technology of choice for portable electronics, renewable energy systems, and electric vehicles. For Li-ion batteries, the charging method has a strong effect on the performance and its cycle life. Hence, it is essential to develop a high-quality charging strategy with high charging efficiency, low temperature-rise, short charging time, and long cycle life.
In this thesis, five simple charging algorithms for Li-ion batteries will be realized and investigated. These five charging strategies include three constant current-constant voltage (CC-CV) methods with different maximum charging voltage, constant loss-constant voltage (CL-CV) method, and constant power-constant voltage (CP-CV) method. In this study, the aforementioned five charging techniques will be implemented and performance indexes such as charging efficiency, temperature rise, charging time, and cycle-life number will be recorded and compared. This study hopes to serve as a reference for users to effectively choose between different Li-ion charging schemes by applications and requirements.
[1] 羅一峰,「運用田口方法之鋰電池最佳化快速充電波形搜尋」,台灣科技大學電機工程博士論文,民國九十九年八月。
[2] 陳蓉賢,「以模糊控制為基礎之鋰離子電池模組充電技術開發」,台灣科技大學電機工程碩士論文,民國一零一年七月。
[3] 柯俊偉,「智慧型電池模組之可程控充電機設計」,台灣科技大學電機工程碩士論文,民國一零一年七月。
[4] 李易玹,「鋰離子電池新型充電方法之研究」,台灣科技大學電機工程碩士論文,民國一零二年七月。
[5] 陳重諺,「以交流阻抗為基礎之鋰離子電池殘餘容量估測技術研究」,台灣科技大學電機工程碩士論文,民國一零三年二月。
[6] 劉俊良,「以模糊田口為基礎之新型電池充電機」,台灣科技大學電機工程博士論文,民國一零三年七月。
[7] 陳冠炷,「以剩餘容量與模糊溫度控制為基礎之鋰離子電池充電機設計與實現」,台灣科技大學電機工程碩士論文,民國一零三年七月。
[8] 連于瑄,「具CAN Bus通訊之鋰離子電池容量估測系統」,台灣科技大學電機工程碩士論文,民國一零五年七月。
[9] 許富昱,「基於模型預測控制之新型鋰離子電池充電演算法」,台灣科技大學電機工程碩士論文,民國一零六年七月。
[10] 劉元凱,「以電池模型為基礎之五階段定電流充電法最佳充電電流值搜尋」,台灣科技大學電機工程碩士論文,民國一零七年六月。
[11] 林哲綱,「以模型預測控制為基礎之鋰離子電池充電演算法」,台灣科技大學電機工程碩士論文,民國一零八年六月。
[12] 林韋盛,「可縮短平衡時間之鋰離子電池組平衡器」,台灣科技大學電機工程碩士論文,民國一零八年六月。
[13] J. Yan, G. Xu, H. Qian, Y. Xu, and Z. Song, “Model predictive control-based fast charging for vehicular batteries,” Energies, vol.4, no. 7, pp. 1178–1196, Aug. 2011.
[14] N. Omar, M. Daowd, P. Bossche, O. Hegazy, J. Smekens, T. Coosemans, and J. Mierlo, “Rechargeable energy storage systems for plug-in hybrid electric vehicles—Assessment of electrical characteristics,” Energies, vol.5, no. 8, pp.2952–2988, Aug. 2012.
[15] K. Shuaib, L. Zhang, A. Gaouda, and M. A. Hafez, “A PEV charging service model for smart grids,” Energies, vol. 5, no. 11, pp.4665–4682, Nov. 2012.
[16] M. Nguyen, D. Nguyen, and Y. Yoon, “A new battery energy storage charging/discharging scheme for wind power producers in real-time markets,” Energies, vol. 5, no. 12, pp.5439–5452,Dec. 2012.
[17] J. Shiau, C. Ma, “Li-ion battery charging with a buck-boost power converter for a solar powered battery management system,” Energies, vol. 6, no. 3, pp.1669–1699,Mar. 2013.
[18] S. S. Zhang, “The effect of the charging protocol on the cycle life of a Li-ion battery,” J. Power Sources, vol. 161, no. 2, pp. 1385–1391, Oct. 2006.
[19] L. R. Chen, “PLL-based battery charge circuit topology,” IEEE Trans. on Industrial Electronics, vol. 51, no. 6, pp. 1344–1346, Dec. 2004.
[20] B. P. McGrath, D. G. Holmes, P. J. McGoldrick, and A. D. McIver, “Design of a soft-switched 6-kW battery charger for traction applications,” IEEE Trans. on Power Electronics, vol. 22, no. 4, pp. 1136–1144, July 2007.
[21] K. M. Tsang, W. L. Chan, “Current sensorless quick charger for Lithiumion batteries,” Energy Conversion and Management 52, 2011, pp.1593-1595.
[22] P. H. L. Notten, J. H. G. Op het Veld, J. R. G. van Beek, “Boostcharging Li-ion batteries: a challenging new charging concept,” Journal of power Source, vol. 145, no. 1, pp. 89-94, Feb 2005.
[23] L. R. Chen, R. C. Hsu, and C. S. Liu, “A design of a grey-predicted Lithium-ion battery charge system,” IEEE Transactions on Industrial Electronics, vol. 51, no. 6, June 2004.
[24] G.C. Hsieh, L.R. Chen, and K. S. Huang, “ Fuzzy controlled Lithium-ion battery charge system with active state of charge controller,” IEEE Transactions on Industrial Electronics, vol. 48, no. 3, June 2001.
[25] L. R. Chen, J. J. Chen, N. Y. Chu, and G. Y. Han, ”Current pumped battery charger,” IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2482- 2488, Jun 2008.
[26] L. R. Chen, C. S. Liu, and J. J. Chen, “Improving phase-locked battery charger speed by using resistance-compensated technique,” IEEE Trans. on Industrial Electronics, vol. 56, no. 4, pp.1205-1211, Apr. 2009.
[27] L. R. Dung, and J. H. Yen, ” ILP-based algorithm for Lithium-ion battery charging profile,” IEEE International Symposium on Industrial Electronics (ISIE), pp. 2286 – 2291 , July 2010.
[28] J.W. Huang, Y.H. Liu, S.C. Wang, Z.Z. Yang, “Fuzzy-control-based five-step Lithium-ion battery charger,” IEEE International Conference on Power Electronics and Drive Systems (PEDS), 2009.
[29] Y. H. Liu, C. H. Hsieh, and Y. F. Luo, “Search for an optimal rapid charging pattern for Li-ion batteries using consecutive orthogonal arrays,” IEEE Trans. Ind. Electron., vol. 26, no. 2, pp. 654–661, 2011.
[30] Y. H. Liu and Y. F. Luo, “Search for an optimal rapid charging pattern for Li-ion batteries using Taguchi approach,” IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 3963–3971, Dec. 2010.
[31] Y. H. Liu, J. H. Teng, and Y. C. Lin, “Search for an optimal rapid charging pattern for Li-ion batteries using ant colony system algorithm,” IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1328–1336, Oct. 2005.
[32] A. B. Khan, V. L. Pham, T. T. Nguyen, and W. Choi, “Multistage constant-current charging method for Li-ion batteries,” IEEE Transportation Electrification Conference and Expo (ITEC), 2016.
[33] L. R. Chen, “A design of an optimal battery pulse charge system by frequency-varied technique,” IEEE Trans. Ind. Electron., vol. 54, no. 1, pp.398-405, Feb 2007.
[34] L. R. Chen, “A design of duty-varied voltage pulse charger for improving Lithium-ion battery-charging response”, IEEE Trans. Ind. Electron., vol. 56, no. 2, pp.480-487, Feb. 2009.
[35] B. K. Purushothama, P. W. Morrison, Jr., and U. Landau, “Reducing mass-transport limitations by application of special pulsed current modes,” Journal of The Electrochemical Society, vol. 152, no. 4, pp. J33-J39, 2005.
[36] B. K. Purushothama and U. Landau, “Rapid charging of Lithium-ion batteries using pulsed current,” Journal of The Electrochemical Society, vol. 153, no. 3, pp. A533-A542, 2006.
[37] S. C. Wang and Y. H. Liu, “A PSO-based fuzzy-controlled searching for the optimal charge pattern of Li-Ion batteries,” IEEE Trans. Ind. Electron., vol. 62, no. 5, pp. 2983–2993, May. 2015.
[38] Z. Y. Chu, X. Feng, L. G. Lu, J. Q. Li, X. B. Han and M. G. Ouyang, “Non-destructive fast charging algorithm of lithium-ion batteries based on the control-oriented electrochemical model,” Journal of applied energy, vol. 204, no. 1, pp. 1240-1250, Mar 2017.
[39] X. G. Yang, C. Y. Wang, “Understanding the trilemma of fast charging, energy density and cycle life of lithium-ion batteries,” Journal of power sources, vol. 402, no. 1, pp. 489-498, Sep 2018.
[40] F. Saidani, F. X. Hutter, R. G. Scurtu, W. Braunwarth, and J. N. Burghartz, “Lithium-ion battery models: a comparative study and a model-based powerline communication,” Advances in radio science, vol. 15, no. 1, pp. 83-91, Sep 2017.
[41] 朱順益,「鋰電池快速充電波型設計」,義守大學電機工程碩士論文,民國九十三年六月。
[42] 吳敏旭,「串聯電池組電池管理系統之開發」,長庚大學電機工程研究所論文,民國九十三年五月。
[43] 李嘉猷,「應用DSP於電動車充電站快充控制系統之研究」,國立成功大學電機工程系碩士學位論文,民國九十年六月。
[44] 屠海令、吳伯榮、朱磊,「先進電池-電化學電源導論」,工業出版社冶金,2006年5月。
[45] 林季鋒,「應用模糊控覺於正負脈衝充電法之快速充電器」,國立中央大學電機工程系碩士學位論文,民國九十一年六月。
[46] 趙介雷,「鋰電池特性之研究與其充電器之設計」,大葉大學電機工程系碩士學位論文,民國九十三年六月。
[47] 建國理工生科所,「行動式電子產品的心臟-二次電池(一)」,http://www.getgoal.com.tw/tech/tech.htm。
[48] 陳羿廷、陳玉惠,「高分子電解質在鋰二次電池上之應用研究現況」,中原大學化學研究所專題報導,民國九十三年第六十二卷第四期。
[49] 孫清華,「可充電電池技術大全」,全華科技圖書股份有限公司,2003年9月。
[50] A. Kirchev, M. Perrin, and E. Lemaire et al, “Studies of the pulse charge of lead-acid batteries for PV applications Part I. Factors influencing the mechanism of the pulse charge of the positive plate,” J. Power Sources, vol. 177, no. 1, pp. 217–225, Feb. 2008.
[51] P. Thounthong, S. Rael, and B. Davat, “Control algorithm of fuel cell and batteries for distributed generation system,” IEEE Transactions on Energy Conversion, vol. 23, no. 1, pp. 148–155 Mar. 2008.
[52] G. C. Hsieh, L. R. Chen, and K. S. Huang, “Fuzzy-controlled Li-ion battery charge system with active state-of-charge controller,” IEEE Trans. on Industrial Electronics, vol. 48, no. 3, pp.585-593, Jun. 2001.
[53] L. R. Chen, R. C. Hsu, and C. S. Liu, “A design of a grey-predicted Li-Ion battery charge system,” IEEE Trans. on Industrial Electronics, vol. 55, no. 10, pp.3692-3701, Oct. 2008.
[54] L. R. Chen, J. J. Chen, N. Y. Chu, and G. Y. Han, “Current-pumped battery charger,” IEEE Trans. on Industrial Electronics, vol. 55, no. 6, pp.2482-2488, Jun. 2008.
[55] P. Petchjatuporn, P. Sirisuk, N. Khaehintung, K. Sunat, P. Wicheanchote, and W. Kiranon, “Low cost RISC implementation of intelligent ultra fast charger for Ni–Cd battery,” Energy Conversion and Management, vol. 49, no. 2, pp. 185–192, Feb. 2008.
[56] B. Y. Chen and Y. S. Lai, “New digital-controlled technique for battery charger with constant current and voltage control without current feedback,” IEEE Trans. on Industrial Electronics, vol. 59, no. 3, pp.1545-1553, Mar. 2012.
[57] F. J. Lin, M. S. Huang, P. Y. Yeh, H. C. Tsai, and C. H. Kuan, “DSP-based probabilistic fuzzy neural network control for Li-ion battery charger,” IEEE Trans. on Power Electronics, vol. 27, no. 8, pp.3782-3794, Aug. 2012.
[58] L. R. Chen, “Design of duty-varied voltage pulse charger for improving Li-ion battery-charging response,” IEEE Trans. on Industrial Electronics, vol. 56, no. 2, pp.480-487, Feb. 2009.
[59] L. R. Chen, S. L. Wu, D. T. Shieh, and T. R. Chen, “Sinusoidal-ripple-current charging strategy and optimal charging frequency study for Li-ion batteries,” IEEE Trans. on Industrial Electronics, vol. 60, no. 1, pp.88-97, Jan. 2013.
[60] L. R. Chen, J. J. Chen, C. M. Ho, S. L. Wu, and D. T. Shieh, “Improvement of Li-ion battery discharging performance by pulse and sinusoidal current strategies,” IEEE Trans. on Industrial Electronics, vol. 60, pp5620-5628, Dec. 2013.
[61] Y. H. Liu, J. H. Teng, and Y. C. Lin, “Search for an optimal rapid charging pattern for lithium-ion batteries using ant colony system algorithm,” IEEE Trans. on Industrial Electronics, vol. 52, no. 5, pp.1328-1336, Oct. 2005.
[62] Y. H. Liu and Y. F. Luo, “Search for an optimal rapid-charging pattern for Li-ion batteries using the Taguchi approach,” IEEE Trans. on Industrial Electronics, vol. 57, no. 12, pp.3963-3971, Dec. 2010.
[63] Y. H. Liu, C. H. Hsieh, and Y. F. Luo, “Search for an optimal five-step charging pattern for Li-ion batteries using consecutive orthogonal arrays,” IEEE Trans. on Energy Conversion, vol. 26, no. 2, pp.654-661, June. 2011.
[64] H. J. Chiu, L. W. Lin, P. L. Pan, and M. H. Tseng, “A novel rapid charger for lead-acid batteries with energy recovery,” IEEE Trans. on Power Electronics, vol. 21, no. 3, pp. 640–647, May 2006.
[65] J. B. Wang and C.Y. Chuang, “Design considerations of microprocessor-controlled multiphase battery charger with fast-charging strategy,” IET on Electric Power Applications, vol. 1, no. 2, pp. 143–152, Mar. 2007.
[66] C. H. Lin, C. L. Chen, Y. H. Lee, S. J. Wang, C. Y. Hsieh, H. W. Huang, and K. H. Chen, “Fast charging technique for Li-ion battery charger,” Proc. of IEEE Electronics, Circuits and Systems International Conference, pp. 618 – 621, Sep. 2008.
[67] M. James, J. Grummett, and M. Rowan et al, “Application of pulse charging techniques to submarine lead-acid batteries,” J. Power Sources, vol. 162, no. 2, pp. 878–883, Nov. 2006.
[68] A. B. Khan, and W. Choi, “Optimal charge pattern for the high-performance multistage constant current charge method for the Li-ion batteries,” IEEE Trans. on Energy Conversion, vol. 33, no. 3, pp.1132-1140, Sep. 2018.
[69] V. Svoboda, H. Doering, and J. Garche, “The influence of fast charging on the performance of VRLA batteries,” J. Power Sources, vol. 144, no. 1, pp. 244-254, Jun. 2005.
[70] W. Shen, T. T. Vo, and A. Kapoor, “ Charging algorithm of Lithium-ion batteries: an overview,” 7th IEEE Conference on Industrial Electronics and Applications, pp.1567-1572, July 2012.
[71] B. Schweighofer, K. M. Raab, and G. Brasseur, “Modeling of high power automotive batteries by the use of an automated test system,” IEEE Trans. Instrum. Meas., vol. 52, no. 4, pp. 1087-1091, Aug. 2003.
[72] Z. M. Salameh, M. A. Casacca, andW. A. Lynch, “A mathematical model for lead-acid batteries,” IEEE Trans. Energy Convers., vol. 7, no. 1, pp. 93-98, Mar. 1992.
[73] 蕭子建、王智昱、儲昭偉,「LABVIEW進階篇」,高立圖書,民國八十九年五月。
[74] 蕭子建、王智昱、儲昭偉,「虛擬儀控程式設計-LABVIEW7X」,高立圖書,民國九十三年三月。
[75] L. Gao, S. Liu, “Dynamic Lithium-ion battery model for system simulation,” IEEE Trans. on Components and Packaging Technologies, vol. 25, no.3, pp. 495-505, Sep. 2002.