研究生: |
蔡瓊緯 Chiung-wei Tsai |
---|---|
論文名稱: |
電腦輔助連續沖模運動模擬 Computed-aided Motion Simulation of Progressive Dies |
指導教授: |
林清安
Ching-An Lin |
口試委員: |
陳炤彰
Chao-Chang Chen 謝文賓 none |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2008 |
畢業學年度: | 96 |
語文別: | 中文 |
論文頁數: | 101 |
中文關鍵詞: | 沖模運動模擬 、干涉檢測 、參數化設計 |
外文關鍵詞: | parametric design, simulation, interference checking |
相關次數: | 點閱:438 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本論文旨在利用商用CAD軟體—Pro/ENGINEER的參數設計及Pro/Mechanism的機構模擬之特性,設計適用於連續沖模運動模擬及干涉檢測的軟體功能,以提高沖模設計效率,縮短模具的開發週期。
本論文首先設計ㄧ個可做連續沖模運動模擬之沖模骨架,然後藉由程式將沖模零件自動化組裝到沖模骨架上,讓沖模零件藉由此骨架做模擬,以了解試模情況。此外,並可針對沖模骨架的幾何尺寸進行參數化設計,讓沖模骨架的幾何尺寸可隨著沖壓模具的幾何尺寸而改變。
在系統開發及實例驗證方面,本論文使用Pro/Toolkit及Visual C++為核心程式,開發一套在Pro/ENGINEER之下的選單操作介面軟體,可檢測出連續沖模在合模中可能發生的干涉,以及模擬連續沖模的沖壓製程,使連續沖模的運作更具有真實感。
This thesis takes the advantages of parametric design of Pro/ENGINEER and mechanism simulation of Pro/Mechanism to develop the software module of motion simulation and interference checking for progressive dies. The developed module will improve the work efficiency and reduce the cycle time of progressive-die design.
The first task in this thesis is to design a skeleton for motion simulation of progressive dies. Next, the die components are automatically assembled to the skeleton. At the end, the motion of the skeleton activates, and the die components move with the skeleton. The physical operation of the die components can thus be realized. The dimensions of skeleton can also be varied in accordance with the dimensions of progressive dies.
In regard to system development and expository examples, this thesis employs Pro/Toolkit and Visual C++ as the kernels to evolve a menu-based system under Pro/ENGINEER which functions to: (1) check interference of progressive dies in their closed mode, and (2) simulate the manufacturing operations of progressive dies. It lets the user to be exposed in a “virtual” manufacturing environment.
1.帝漢實業股份有限公司,「連續沖模設計軟體DCPⅡ操作手冊」,帝漢實業股份有限公司,台北,2000。
2.Parametric Technology Corporation, Pro/Engineer PDX 12 User's Guide, Waltham, MA, USA, 2002。
3.戴宜傑,「沖壓加工與沖模設計」,新陸書局股份有限公司,台北,1987。
4.黃重恭,「沖剪模設計原理」,全華科技圖書股份有限公司,台北,2004。
5.陳永濱 陳炳明,「沖壓模具基礎設計」,金禾資訊股份有限公司,台北,2005。
6.陳志文,「連續沖模之模座設計與動態模擬之Pro/TOOLKIT程式開發」,國立臺灣科技大學機械工程研究所碩士論文,台北,2005。
7.黃俊鴻,「連續沖模沖頭設計之Pro/Toolkit程式開發」,國立臺灣 科技大學機械工程研究所碩士論文,台北,2006。
8.李嘉峻,「以Pro/Toolkit進行連續沖模之側向沖頭機構設計」,國立臺灣科技大學機械工程研究所碩士論文,台北,2006。
9.宋祥瑀,「連續沖模板料沖程佈置之Pro/Toolkit程式設計」,國立臺灣科技大學工程研究所碩士論文,台北,2007。
10.吳家豪,「TFT-LCD模組之參數化結構設計」,國立臺灣科技大學工程研究所碩士論文,台北,2007。
11.曾建霖,「面板鐵框之參數化沖壓模具設計」,國立臺灣科技大學工程研究所碩士論文,台北,2007。
12.施啟田,「連續沖模之3D電腦輔助干涉檢測與製程動態模擬」,國立臺灣科技大學工程研究所碩士論文,台北,2002。
13.林清安,「Pro/EMGINEER野火3.0動態機構設計與模擬」,旗標出版股份有限公司,台北市,2006。
14.林清安,「Pro/EMGINEER 2.0零件組裝與產品設計」,旗標出版股份有限公司,台北市,2003。
15.Parametric Technology Corporation, Pro/ENGUNEER ® Pro/Toolkit User’Guide Release Wildfire 2.0,MA,USA,2004
16.李世國,「Pro/TOOLKIT程序設計」,機械工業出版社,北京,2003。
17.張繼春,「Pro/ENGINEER二次開發實用教程」,北京大學出版社,北京,2003。