研究生: |
卓家良 Jia-Liang Jhuo |
---|---|
論文名稱: |
無線射頻辨識於建築物管線定位管理之研究 Identification of Pipeline Locations for Building Remodeling Using RFID |
指導教授: |
鄭明淵
Min-Yuan Cheng |
口試委員: |
周瑞生
Ruei-sheng Jhou 葉世文 Shih-wun Ye |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 營建工程系 Department of Civil and Construction Engineering |
論文出版年: | 2008 |
畢業學年度: | 96 |
語文別: | 中文 |
論文頁數: | 137 |
中文關鍵詞: | RFID 、建築物管線 、定位技術 |
外文關鍵詞: | RFID, Building Pipeline, Location |
相關次數: | 點閱:196 下載:2 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
隨著建築物使用時間增加,一旦管線出現破裂、老化,常因管線定位問題,必需大範圍打除或開挖以找尋正確的管線位置,稍有不慎可能傷害其他管線,因此,若能在管線維護時正確偵測出欲維修管線之位置,將有助於管線維修工程之效率,降低施工錯誤之浪費。
本研究利用RFID標籤重覆讀寫的功能,記錄、更新管線基本資訊等特色,發展「建築物管線定位之RFID應用模式」,並於實驗室與工地現場針對乾溼式隔間牆,及不同牆版材質與表面裝修,進行標籤可讀最遠距離與標籤可讀辨識範圍試驗,依此測試標籤辨識效能。
最後,參考應用模式之試驗數據,及依據使用者需求建構「RFID建築物管線定位資訊系統」。本系統透過迷你手持電腦搭配RFID讀取器辨識管線基本資訊,以無線網路進行資料傳輸,並結合建築物管線定位機制,輔助使用者由遠到近慢慢逼近牆版直到定位出管線位置為止,並於牆面上繪製出管線確切位置走向,便於管線維護人員正確進行牆面鑿除,減少誤挖管線之疏失。
綜言之,本研究藉由RFID技術應用在管線定位追蹤上,可減少大量的時間於管線追踨與定位,並確保打除或開挖不會傷及其他管線,大幅降低所需成本,以及提昇建築物管線施工維修效率。
Once the pipes rupture, it is difficult to locate the damaged location correctly but by the wide range excavation. However, it will damage other pipes cautious less. Therefore, it is helpful and effective if it is possible to locate the damage pipes correctly while doing the regular pipe maintenance.
In this research which uses RFID mark function of repeated read and write to record and renew pipes information and to develop RFID application model of building pipes locating. Furthermore, this research also tested the mark identity efficiency by applying RFID mark to wall in site with different material.
Finally, reference the testing numbers of applied models and construct RFID building pipe locating information system based on users demands. This system depends on notebook and RFID reading machine to identify pipes information, wireless data translation, and combine pipes locating function to assist user locate damages gradually. In addition, to avoid the error of evacuation, RFID can also plot the pipe systems location and direction correctly. This research applied RFID on pipes locating and tracking to avoid time and money consuming.
1.陳宏宇,「RFID系統入門-無線射頻辨識系統」,松崗股份有限公司,2005。
2.日經BP,「RFID技術編輯部。RFID技術與應用」,旗標出版股份有限公司,2005。
3.吳榮元,「無線射頻辨識(RFID)技術於鋼骨工程吊裝即時監控之應用」,國立台灣科技大學碩士論文,2006。
4.潤弘精密,「預鑄/行動生管系統簡報」,潤弘精密股份有限公司,2005。
5.財團法人台灣營建研究院,「建築物管線老化與劣化非破壞性檢測技術之建置」,內政部建築研究所委託研究報告,2006。
6.陳裕益,「永續發展理念下都市住宅設備現況調查分析」,國立成功大學建築研究所碩士論文,2001。
7.江南震,「住宅建築物給水配管的劣化診斷與使用壽期之研究」,國立台灣科技大學工程技術研究所建築設計學程碩士論文,1999。
8.李孟杰,「住宅生活熱水使用耗能評估與節能方法之研究」,國立台灣科技大學建築系博士論文,2006。
9.黃世孟、郭斯傑、周鼎金,「各級學校校舍維護管理參考作業手冊,教育部研究報告」,2002。
10.李維義,「以維護觀點探討集合住宅給排水管路配設空間之研究」,國立成功大學建築研究所碩士論文,2003。
11.王志豪,「建築物管線與設備之耐震評估分析」,國立中央大學土木工程研究所碩士論文,2005。
12.楊智超,「一個以RFID為基礎的定位機制」,國立交通大學資訊管理研究所碩士論文,2006。
13.劉澄昇,「RFID在即時定位系統之創新應用」,研討會,2008。
14.林永仁、何慶雄、吳振勝,「精密室內定位技術建立與驗證」,2005。
15.邱瑩青,「RFID實踐-非接觸式智慧卡系統開發」,學貫行銷股份有限公司,2005。
16.內政部建築研究所研究報告,「無線射頻辨識(RFID)於建築產業應用之研究」,內政部建築研究所,2005。
17.王鴻儒,「SQL Server 2005資料庫設計/建置/管理實務」,金禾資訊公司,2005。
18.施威銘研究室,「新觀念ASP.NET 2.0網頁程式設計」,旗標出版股份有限公司,2006。
19.陳威年,「無線射頻辨識(RFID)技術應用於開放式建築使用維護階段之研究」,國立台灣科技大學碩士論文,2006。
20.鄭可偉,「無線射頻辨識(RFID)技術應用於開放式建築生命週期之研究」,國立台灣科技大學碩士論文,2007。
21.陳建通,「無線射頻辨識(RFID)整合4D技術於開放式建築即時監控系統之研究」,國立台灣科技大學碩士論文,2007。
22.許程翔,「透過雷達對地下管線探查之應用研究」,國立成功大學碩士論文,2003。
23.B. Akinci, “Using sensor systems and standard project models to capture and model project history for building commissioning and facility management”, Journal of Surface Mining, 5-6, pp. 1-10, 2003.
24.S.W. Kwon, M.W. Lee, J.G. Han, M.Y. Cho, and J.W. Park, “Model Development of the Material Tracking System for High-Rise Building Construction Project Using RFID Technology”, Construction Engineering & Management Research Department: Korea Institue of Constuction Technology,2004.
25.Jongchul Song, Carlos Caldas, Esin Ergen, Carl Hass, and Burcu Akinci, “Field Trials Of RFID Technology for Tracking Pre-Fabricated Pipe Spools”, 2004.
26.R.Want, “The Active Badge Location System”, ACM Trans. Information Systems, 1992, pp. 91-102 .
27.S.K.Sinha and P.W.Fieguth 2006,“Automated detection of cracks in buried concrete pipe images” , Automation in Construction, 15(1), pp. 58~7.