簡易檢索 / 詳目顯示

研究生: 吳俊廷
Jun-Den Wu
論文名稱: 分散型電源與網目型配電系統併聯運轉之特性研究與可靠度分析
Analysis of Operation Characteristic and Reliability of a Meshed Distribution Network Interconnected with Distributed Generations
指導教授: 陳在相
Tsai-Hsiang Chen
口試委員: 楊金石
none
蒲冠志
none
辜志承
Jyh-Cherng Gu
學位類別: 碩士
Master
系所名稱: 電資學院 - 電機工程系
Department of Electrical Engineering
論文出版年: 2009
畢業學年度: 97
語文別: 中文
論文頁數: 85
中文關鍵詞: 分散型電源網目型配電系統可靠度
外文關鍵詞: Distributed Generation, meshed, distribution system, reliability
相關次數: 點閱:214下載:12
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

本論文旨在探討分散型電源與網目型配電系統併聯運轉時所可能產生之問題並分析該型態配電系統的可靠度。首先評估與比較網目型與放射型配電系統之可靠度,因為高可靠度是電業實現電網優質化的主要目標之一;其次以電力系統專業模擬軟體CYME建構一範例系統之全尺度等效電路模型,藉以分析網目型配電系統在常態情況下之穩態運轉特性,並進而探討分散型電源與網目型配電系統併聯運轉所產生之諸多問題;最後則針對運轉問題提出因應策略及提出以二元蒐尋法來改善系統最大可併網量。


This thesis is to explore the interconnection problem of a meshed distribution network interconnected with distributed generations and to evaluate the reliability of meshed distribution networks. First of all, reliabilities of meshed and radial distribution networks are evaluated. Reliability is one of the major goals of many utilities to optimize their distribution networks in the near future. Next, full-scale circuit model of a sample system in mesh arrangement is constructed and simulated using a professional power system simulation package, CYME. Simulation results are then organized to present the steady-state operating features of the sample meshed distribution network under the normal operating condition. Next, some DGs are embedded in the sample system and the problems caused by DGs interconnection are identified and explored. Finally, some effective measures to overcome the interconnection problems are presented and the binary search method is proposed to improve the network to enlarge maximum allowable capacity of installation of distributed Generations.

中 文 摘 要I 英 文 摘 要II 誌 謝III 目 錄IV 圖 表 索 引VI 第一章緒論1 1.1研究背景與動機1 1.2研究方法與步驟2 1.3研究貢獻2 1.4論文架構3 第二章分散型電源種類與配電系統型態簡介5 2.1前言5 2.2分散型電源定義5 2.3分散型電源種類6 2.3.1風力發電6 2.3.2太陽能發電8 2.4配電系統型態簡介9 2.4.1放射型配電系統10 2.4.2常閉環路型配電系統10 2.4.3網目型配電饋線11 2.5分散型電源與配電系統併聯運轉規範描述12 2.6本章結論13 第三章配電系統可靠度分析與分散型電源併網之經濟效益評估14 3.1前言14 3.2可靠度計算公式介紹14 3.2.1串聯系統之計算公式15 3.2.2並聯系統之計算公式15 3.2.3最小切集法17 3.3範例系統參數介紹18 3.4系統可靠度分析20 3.5分散型電源併網成本效益評估34 3.6結語40 第四章分散型電源與網目型配電系統併聯運轉特性分析41 4.1前言41 4.2系統基本運轉特性分析41 4.3分散型電源最大併網量評估46 4.4分散型電源併網下之系統運轉特性分析47 4.5結語60 第五章分散型電源與網目型配電系統併聯運轉因應策略研究61 5.1前言61 5.2分散型電源於網目型配電系統故障運轉策略研究61 5.2.1限制分散型電源發電量61 5.2.2使用電壓控制設備63 5.3電壓評估公式應用於網目型配電饋線之準確性探討64 5.4範例系統參數不同對電壓評估公式準確性影響之探討67 5.4.1饋線線徑更改為350MCM67 5.4.2饋線長度更改為7km69 5.5分散型電源併網量策略研議70 5.6結語80 第六章結論與未來研究方向81 6.1結論81 6.2未來研究方向81 參 考 文 獻83 作 者 簡 介85

[1] T. Ackermann, G. Andersson and L. Soder, “Distributed Generation : a definition,” Department of Electric Power Engineering , Royal Institute of Technology, 29 June 2000.
[2] G. Peprmans, J. Driesen, D. Haeseldonckx, R. Belmans, W. D’haeseleer, “Distrbuted generation: definition, benefits and issues,” Energy Policy 33, pp. 787-798, 2003.
[3] Windpower Monthly http://www.windpower-monthly.com/
[4] 全球風能協會 http://www.gwec.com/
[5] 2008再生能源網 http://re.org.tw/
[6] 蔡豐正,「分散式發電系統之最佳安置點與侵入等級之研究」,國立成功大學碩士學位論文,民國九十六年七月。
[7] 台灣電力公司,「配電系統採同一主變常閉環路之建置」,九十年度研究報告,民國九十年五月。
[8] 黃維澤,「配電饋線由放射型升級為常閉環路型之研究」,國立台灣科技大學博士學位論文,民國九十四年六月。
[9] 配電技術手冊(四),「地下配電線路設計」,台灣電力公司,民國八十五年八月。
[10] 台灣電力股份有限公司,「再生能源發電系統併聯技術要點」,民國九十七年三月。
[11] R. Billinton and R. N. Allan, “Reliability Evaluation of Power Systems,” Plenum Publishing, New York, 1984.
[12] J. Wiley and Sons, ”Reliability Modeling in Electric Power Systems,” A Wiley-Interscience Publication, New York, 1978.
[13] 曹登發,「配電系統規劃之可靠度塑模研究」,國立台灣科技大學電機所博士學位論文,民國九十二年六月。
[14] F. V. Gomes, S. Carneiro, J. L. R. Pereira, M. P. Vinagre, P. A. N. Garcia, L. R. Araujo, “A New Heuristic Reconfiguration Algorithm for Large Distribution Systems, ” IEEE Trans. Power system Vol.20,No 3, pp. 1373-1378, Aug 2005.
[15] 楊進德,「配電系統規劃的可靠度成本模型設計與價值分析之研究」,國立中山大學電機所博士學位論文,民國九十一年六月。
[16] 陳在相、辜志承、楊文治、許炎豐、楊念哲、王閔賢、陳泰州、廖文彬、許家榮,「分散型電源併入配電系統之電壓控制與防止單獨運轉」,台灣電力股份有限公司九十六年研究計畫,期末報告,國立台灣科技大學,民國九十六年一月。
[17] 蔡宜達,「分散型電源在常閉環路配電饋線上之最大可併網量評估」,國立台灣科技大學電機所碩士學位論文,民國九十六年七月。

QR CODE