研究生: |
呂承哲 Cheng-Che Lu |
---|---|
論文名稱: |
熱泡式噴印模組結合反應型融合劑 於尼龍12之3D列印成型研究 Research on the 3D Printing of PA12 Using Thermal Bubble Printing Module with Reactive Fusion Agent |
指導教授: |
鄭正元
Jeng-Ywan Jeng 陳崇賢 Chorng-Shyan Chern |
口試委員: |
鄭正元
Jeng-Ywan Jeng 陳崇賢 Chorng-Shyan Chern 許啟彬 Chi-Pin Hsu 覺元彙 Yuan-Hui Chueh |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2020 |
畢業學年度: | 108 |
語文別: | 中文 |
論文頁數: | 108 |
中文關鍵詞: | 反應型融合劑 、熱泡式噴印模組 、快速燒結 、交聯反應 、PA12 |
外文關鍵詞: | Reactive Fusion Agent, thermal bubble inkjet printing module, high speed sintering technology, cross-linking reaction, PA12 |
相關次數: | 點閱:205 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
參考文獻
[1] 黃彥迪, 頁寬式壓電噴頭模組應用於高速粉床熔融3D列印機台的開發與研究, 機械工程系, 國立臺灣科技大學, 2018, pp. 91.
[2] L. Fox, A. Ellis, N. Hopkinson, Use of an Alternative Ink in the High Speed Sintering Process, 2015.
[3] I. Gibson, Additive manufacturing technologies : 3D printing, rapid prototyping and direct digital manufacturing, Second edition. ed., ©2015.New York : Springer, [2015], 2015.
[4] S. Shirazi, S. Gharehkhani, M. Mehrali, H. Yarmand, H. Metselaar, N.A. Kadri, N.A. Abu Osman, A review on powder-based additive manufacturing for tissue engineering: Selective laser sintering and inkjet 3D printing, Science and Technology of Advanced Materials, 16 (2015).
[5] 鄭正元, 3D列印 : 積層製造技術與應用, 初版 ed., 新北市 : 全華圖書, 2018印刷, 2018.
[6] R. Singh, A. Gupta, O. Tripathi, S. Srivastava, B. Singh, A. Awasthi, S. Kumar Rajput, P. Sonia, P. Singhal, K. Saxena, Powder bed fusion process in additive manufacturing: An overview, Materials Today: Proceedings, (2020).
[7] A. Ellis, High Speed Sintering: The Next Generation of Manufacturing, in, 2017, pp. 107-118.
[8] A. Ellis, A. Hadjiforados, N. Hopkinson, I. Reinhold, Speed and Accuracy of High Speed Sintering, NIP & Digital Fabrication Conference, 2015 (2015).
[9] N. Hopkinson, P. Erasenthiran, High Speed Sintering-Early Research into a New Rapid Manufacturing Process, Solid Freeform Fabrication Symposium, (2004).
[10] H.R. Thomas, N. Hopkinson, P. Erasenthiran, High Speed Sintering-Continuing research into a new Rapid Manufacturing process, 2006.
[11] C. Chatham, T. Long, C. Williams, A Review of the Process Physics and Material Screening Methods for Polymer Powder Bed Fusion Additive Manufacturing, Progress in Polymer Science, 93 (2019).
[12] L. Kantor-Dyson, A. Ellis, N. Hopkinson, High Speed Sintering: The influence of print density on feature resolution and accuracy, NIP & Digital Fabrication Conference, 2014 (2014).
[13] C.E. Majewski, B. Hobbs, N. Hopkinson, Effect of bed temperature and infra-red lamp power on the mechanical properties of parts produced using high-speed sintering, 2007.
[14] C. Majewski, D. Oduye, H.R. Thomas, N. Hopkinson, Effect of infra-red power level on the sintering behaviour in the high speed sintering process, Rapid Prototyping Journal, 14 (2008).
[15] P. Hewlett, HP multi jet fusion technology: a disruptive 3D printingtechnology for a new era of manufacturing. In: Technical white paper, 2014, (https://www8.hp.com/tw/zh/printers/3d-printers/products/multi-jet-technology.html).
[16] Z. Xu, The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering, Journal of Manufacturing Processes, 47 (2019) 419-426.
[17] H. Wijshoff, The dynamics of the piezo inkjet printhead operation, Physics Reports, 491 (2010) 77-177.
[18] H.P. Le, Progress and Trends in Ink-jet Printing Technology, Journal of Imaging Science and Technology, 42 (1998) 49-62.
[19] 李悅慈, 溶液性質與噴墨設備對衛星液滴的改善之影響, 機械工程系所, 國立交通大學, 2006, pp. 59.
[20] 莊馥安, 黏著劑噴印參數對3D砂模列印影響之研究, 機械工程系, 國立臺灣科技大學, 2017, pp. 98.
[21] B. Derby, Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution, Annual Review of Materials Research, 40 (2010) 395-414.
[22] Y.-F. Liu, M.-H. Tsai, Y.-F. Pai, W.-S. Hwang, Control of droplet formation by operating waveform for inks with various viscosities in piezoelectric inkjet printing, Applied Physics A, 111 (2013).
[23] 研能科技, ComeTrue® T10 全彩粉末式3D列印機, (https://www.cometrue3d.com/tw/p/full-color-3d-printer-tw).
[24] 興立台實業有限公司, (http://webcache.googleusercontent.com/search?q=cache:G7BhpBS9opwJ:www.sinletai.com.tw/zh-hans/+&cd=2&hl=zh-TW&ct=clnk&gl=tw).
[25] Optris台灣總代理, PI 160 高速紅外線熱像儀, (https://www.usoon.com.tw/infrared-cameras/optris-PI160/).
[26] 3DMART, PA12 Smooth Print Ready 粉末, (https://3dmart.com.tw/shop/pa12-smooth-print-ready-powder).
[27] 3DMART, Sinterit Lisa SLS 3D列印機, (https://3dmart.com.tw/shop/sinterit-lisa).
[28] 昶豐機械科技有限公司, 開合式密煉機, (http://m.cfine.cc/product/kaiheshimilianji1L3L5L.html).