簡易檢索 / 詳目顯示

研究生: 賴弘嚴
Hung-Yen Lai
論文名稱: 安全工程應用於LED照明標準建立之研究
Research for Safety Engineering and Apply to Establishment of LED Lighting Standard
指導教授: 黃佑民
You-Min Huang
口試委員: 林榮慶
Zone-Ching Lin
許覺良
Chaug-liang Hsu
學位類別: 碩士
Master
系所名稱: 工程學院 - 機械工程系
Department of Mechanical Engineering
論文出版年: 2011
畢業學年度: 99
語文別: 中文
論文頁數: 66
中文關鍵詞: 安全工程LED照明標準
外文關鍵詞: safety engineering, LED, lighting standard
相關次數: 點閱:122下載:1
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 產品安全標準是為保障消費者在使用電器時能夠確保人身安全而建立起的,歐美各國絕大部份的採購商在向國內製造廠商下單時,都會要求產品須符合產品安全規範,且須通過第三方實驗室的產品認證,因此產品須具備安全設計且符合各國之安全規範之要求已成為全球必然之趨勢。

    近年來因LED 具有節能與環保的產品優勢,所以 LED燈具在燈具產業的發展已成為主要趨勢。
    所謂的 LED 燈具,顧名思義,就是燈具產品採用 LED (Light-Emitting Diode,發光二極體) 技術做為主要的發光源。也因此,近幾年來世界各國也逐步在建立LED燈具相關產品的安全標準。

    本研究之目的即在於以安全工程為研究內容,並以產品使用過程中,危害之發生與對人體造成傷害之作動方式,建構一個解析模式與理論,並作深入之探討與分析。最後以此解析模式與理論驗證一些 LED 照明標準所使用的安全性評估法條建立之原理,以驗證此解析模式與理論的可行性。


    The purpose to establish the product safety standards is to protect consumer when operate electrical appliances. Most of buyers in the United States and Europe will request the safety certification for products and through the third-party product certification laboratory when give orders to manufacturers. So products need have safety design and comply with the requirement of safety standard have become the major trend in the world.
    Having the advantages of energy saving and being environmentally friendly, LED lighting products have become mainstream devices in the lighting industry. As named, LED lighting products use LEDs (Light-emitting Diodes) as the main lighting source. A LED is a semiconductor diode. As a result, many countries around the world gradually establish the LED lighting safety standards in recent years.
    The purpose of this research will study the contents of safety engineering and create a analysis mode and theory of risk occurs and damage to user’s body. And use the analysis mode and theory to verify and interpret some rationale of requirement establishment of LED lighting standards and verify the feasibility of the analysis mode and theory.

    中文摘要Ⅰ 英文摘要Ⅱ 誌  謝Ⅲ 目 錄IV 圖表索引VI 第一章緒論1 1.1研究背景1 1.2研究動機與目的3 1.3研究步驟與流程4 1.4論文架構6 第二章文獻回顧與探討7 2.1安全工程之研究7 2.2 產品安全模式在安規之應用9 2.3 LED 燈具產品之特性分析10 第三章研究方法14 3.1產品設計的安全工程14 3.2基於考量危險的安全工程學15 3.3數值理論19 3.3.1熱能傷害模型之建立19 3.3.2電能傷害模型之建立24 第四章安全工程分析模式應用在標準建立28 4.1美國 LED 安全標準 ANSI/UL 8750 內文分析28 4.1.1零組件選用之分析30 4.1.2環境考量之分析32 4.1.3外殼使用之分析32 4.1.4內配線使用之分析36 4.1.5電流回路使用之分析38 4.1.6帶電體避免接觸之分析38 4.1.7散熱空間考量之分析40 4.1.8現場結線考量之分析40 4.1.9極性識別使用與迴路安全之分析41 4.1.10抗拉機制使用之分析42 4.1.11絕緣材料使用之分析42 4.1.12印刷電路板使用之分析43 4.1.13電氣間距使用之分析44 4.1.14性能測試驗證之分析46 4.1.15溫升測試驗證之分析47 4.1.16耐壓測試驗證之分析48 4.1.17異常測試驗證之分析49 4.1.18機械性測試驗證之分析52 4.1.19環境測試驗證之分析54 4.1.20標籤要求之分析55 4.2安全工程分析模式應用在標準建立及數值計算57 4.3安全工程分析模式綜合探討61 第五章結論與建議62 5.1結論62 5.2未來研究方向與建議63 參考文獻64 作者簡介65 授 權 書66

    1.中華民國法律,消費者保護法 – 民國 92 年 01 月 22 日修正。

    2.ANSI/UL 8750 - UL Standard for Safety for Light Emitting Diode (LED) Equipment for Use in Lighting Products, UL 8750 First Edition, Dated November 18, 2009

    3.「綠色能源產業旭升方案」行動計畫 – 經濟部 98年 10月

    4.陳志龍 (民 97),產品安全設計流程之建立,國立台灣大學機械工程學系碩士論文。

    5.林冠旭 (民 97),LCD Monitor 的落下試驗與模擬分析,國立台灣科技大學機械工程學系碩士論文。

    6.林中群 (民 84),防範人為失誤之產品安全研究與設計,國立成功大學工業設計學系碩士論文。

    7.柯敏祥 (民 96),符合UL安規之LCD TV機構設計,國立台北科技大學機電整合研究所碩士論文。

    8.LED光彩背後的無名英雄 - 散熱載板的難題 - 作者:陳立閔,任職於 UL。

    9.基於危險的安全工程學 (HBSE) -惠普公司以及安捷倫科技公司。

    QR CODE