研究生: |
陳威年 Wei-Nien Chen |
---|---|
論文名稱: |
無線射頻辨識(RFID)技術應用於開放式建築使用維護階段之研究 Apply Radio Frequncy Identification(RFID) for Open Building Maintenance and Remodeling |
指導教授: |
鄭明淵
Min-Yuan Cheng |
口試委員: |
葉世文
none 陳鴻銘 Hung-Mng Chen 謝佑明 Yo-Ming Hsieh |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 營建工程系 Department of Civil and Construction Engineering |
論文出版年: | 2006 |
畢業學年度: | 94 |
語文別: | 中文 |
論文頁數: | 107 |
中文關鍵詞: | RFID 、開放式建築 、支架體 、填充體 |
外文關鍵詞: | RFID, Open Building, Support systems, Infill systems |
相關次數: | 點閱:232 下載:1 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
隨著社會環境變遷,大規模新建工程已不復常見,使用者對既有住屋之使用變更及維護更新等需求日益增加,而施工方式普遍多為拆除重建,此舉勢必會增加營建廢棄物,導致建築資源浪費。如能將構件更新再利用,將可有效降低環境污染及資源浪費;此外,使用維護階段由於設計及施工廠商皆已退出,原始之設計與施工資訊,容易因人為保存不善而遺失,且申請及審查程序過於冗長,使得使用者無法即時取得原始設計資料(Original Design Data)。如能將這些原始設計資料(Original Design Data)儲存於建物構件中,將可永久保存資料於建物中避免遺失。
本研究利用開放式建築可變性及構件再利用等特色,配合無線射頻辨識(RFID)技術,建構「開放式建築物使用維護階段之RFID應用模式」,確認建物在使用維護及變更所需之結構設計參數,分析支架體及填充體RFID Tag需儲存之必要資料項目,建立一套有效儲存方法,使建築構件具備自動提供設計資訊之能力,作為日後使用維護及變更時之分析基礎,提升建築構件使用維護效率。
為了讓使用者快速收集構件資訊,本研究開發「RFID開放式建築構件整合資訊管理系統」,可於使用維護及變更時,使用行動讀取設備,即時(Real Time)獲取建物構件資訊,作為建物進行變更時再設計及分析之基礎,並可透過資料格式轉換,提供結構分析軟體快速建立結構模型,以利結構分析者進行建築物安全分析。
In Recent years newly-built construction of large scale seldom takes place as social environment changes. Users’ demands of modification and maintenance for their own buildings increase day by day. However, construction methods are usually demolishing and re-constructing, which undoubtedly increase construction trash and waste of architecture resources. If components could be reused, it will effectively reduce environmental pollution and waste of resources. Besides, original design data and information are lost easily due to improper preservation. Procedure of applications making and examining takes so much longer time that users cannot obtain original design data immediately. Original design data will eternally preserved and avoid being lost as long as they could be stored in components of a building.
This research build an “Model of open building maintenance and remodeling applied RFID technique” utilize characteristics of component changeability and reuse, and cooperate radio frequency identification(RFID) techniques that confirm structure design data when building maintains and remodeling need.Analyze essential store data for support systems and infill systems,and establish a store way effectively to make the component of building qualified ability of offering design information automatically as the foundation of maintenance and remodeling in the future, and promote the efficiency of maintenance.
In order to let users collect component information of building fast, this research develop an“RFID open building component information of integration management system”that could help users obtaining component information of building immediately by mobile equipment when building maintains and remodeling as the foundation of redesign and re- analyze while carrying on the change.And it can also transfer the data format to offer the structure analysis software and set up structure model immediately ,and help analysing safety with structure analyst.
1.內政部建築研究所研究報告,「無線射頻辨識(RFID)於建築產業應用之研究」,內政部建築研究所,民國94年。
2.工業研究院,「RFID木棧板應用測試報告─含水率分析」,經濟部商業司:工研院系統與航太技術發展中心,民國93年。
3.黃俊能,「自動辨識系統在鋼結構大樓施工流程應用之研究」,國立台灣大學碩士論文,民國84年。
4.陳建群,「營造工地自動化施工時程監控」,國立台灣科技大學碩士論文,民國85年。
5.徐政雄,「RFID的應用對供應鏈的影響-以汽車產業為例」,國立成功大學高階管理碩士在職專班碩士論文,民國93年。
6.許宥閒,「企業導入RFID對其企業流程之影響-以國內資訊產品代理商為例」,私立實踐大學企業管理研究所碩士論文,民國93年。
7.日經BP,「RFID技術編輯部。RFID技術與應用」,旗標出版股份有限公司,民國94年。
8.邱瑩青,「RFID實踐-非接觸式智慧卡系統開發」,學貫行銷股份有限公司,民國94年。
9.陳宏宇,「RFID系統入門-無線射頻辨識系統」,松崗股份有限公司,民國94年。
10.潤弘精密,「預鑄/行動生管系統簡報」,潤弘精密股份有限公司,民國94年。
11.王明蘅,「開放式建築論文選輯-邁向居民參與及友善之房屋產業」,中華民國建築學會,民國89年。
12.內政部建築研究所研究報告,「開放式建築與建管法規與制度之研究」,內政部建築研究所,民國90年。
13.內政部建築研究所研究報告,「開放式住宅之開發案例」,內政部建築研究所,民國88年。
14.內政部建築研究所研究報告,「開放建築整體規劃與發展之研究」,內政部建築研究所,民國88年。
15.王明蘅,「變化:大眾住宅的系統設計」,台灣省住宅及都市發展局,民國78年。
16.張育馨,「既有集合住宅建築整建之平面可變性研究」,國立台灣科技大學建築研究所碩士論文,民國91年。
17.吳穹霑,「住宅永續整建之發展概況與建議」,國立台灣科技大學建築研究所碩士論文,民國93年。
18.陳相如,「可動隔間構法開發研究」,國立台灣科技大學建築研究所碩士論文,民國92年。
19.蔡志祥,「臺灣住宅整建產業發展策略」,國立台灣科技大學建築研究所碩士論文,民國92年。
20.施建安,「開放式構造系統設計之操作─以本土鋼構住宅為例」,國立台灣科技大學建築研究所碩士論文,民國92年。
21.林麗珠,「開放式界面之建築構造理論」,國立成功大學建築研究所博士論文,民國90年。
22.李易晉,「應用PDA 輔助營建工地管理之研究」,國立中央大學土木工程研究所碩士論文,民國92年。
23.陳至德,「應用個人數位助理於營建品質管理之」,國立台北科技大學土木與防災研究所碩士論文,民國92年。
24.蕭文華,「鋼筋混凝土構造建築物之耐震性能評估與現行耐震評估方法比較」,國立中原大學土木工程研究所碩士論文,民國91年。
25.林正穆,「既有鋼筋混凝土結構功能設計法耐震能力評估之探討」,國立中原大學土木工程研究所碩士論文,民國92年。
26.Stephen Kendall, Jonathan Teicher,“Residential Open Building”,Building Community, The American Institute of Architects, 2000.
27.Edward J, Jaselskis, Mary Rose Anderson, Charles T. Jahren, YvanRodriguez, Steven Njos,“Radio-Frequency Identification Applications In Construction Industry”, 1995.
28.Edward J, Jaselskis,“Implementing Radio Frequency Identification in the Construction Process”, A.M.ASCE, 2003.
29.Soon-Wook Kwon, Min-Woo Lee, Jae-Goo Han, Moon-Young Cho, Jae-Woo Park,“Model Development of the Material Tracking System for High-Rise Building Construction Project Using RFID Technology”, Construction Engineering & Management Research Department:Korea Institue of Constuction Technology, 2004.
30.Jongchul Song, Carlos Caldas, Esin Ergen, Carl Hass, Burcu Akinci,“Field Trials Of RFID Technology for Tracking Pre-Fabricated Pipe Spools”, U.S.A.:University of Texas at Austin & Carnegie Mellon University, 2004.