簡易檢索 / 詳目顯示

研究生: 洪綾秀
Ling-hsiu Hung
論文名稱: 多段式分佈反饋式雷射的設計製作與特性比較
Design, Fabrication, and Performance Comparison of Multi-section Distributed Feedback Lasers.
指導教授: 李三良
San-liang Lee
口試委員: 林恭如
Gong-ru Lin
徐世祥
Shih-hsiang Hsu 
葉秉慧
Ping-hui Yeh
學位類別: 碩士
Master
系所名稱: 電資學院 - 電子工程系
Department of Electronic and Computer Engineering
論文出版年: 2014
畢業學年度: 103
語文別: 中文
論文頁數: 76
中文關鍵詞: 分佈反饋式雷射多段式分佈反饋式雷射雙電極分佈反饋式雷射
外文關鍵詞: multi-section DFB laser
相關次數: 點閱:168下載:5
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 為應用於NG-PON2技術下,本論文欲分析比較多段式DFB雷射之特性,其方法是製作不同比例的波長位移層以改變DFB雷射的縱向折射率,造成布拉格波長偏移,達到穩定的單模輸出特性。本論文提出含波長位移層比例1:1之兩段式DFB雷射結構以增加其波長調變範圍,以及含不同波長位移層比例之多段式DFB雷射結構以比較其特性。


    The goal of this thesis is to analyze and compare the properties of multi-section DFB lasers. The tunable laser can be used in NG-PON2 and covers the required 2.4 nm of wavelength tuning range. We design the active region with and without wavelength shift layer to have different lengths. The region without wavelength shift layer is defined by selective wet-etching such that the wavelength shift layer remains on the other section. The wavelength shift layer changes the effective refractive index in the regions and results in different Bragg wavelengths for different regions. We can obtain single-mode operation by simply control of the wavelength shift layer. The fabrication procedures are almost the same as those for standard DFB lasers.

    第一章 研究動機與元件技術介紹 1-1 前言 1-2 DFB雷射簡介 1-3 研究動機 1-4 研究方法 1-5 論文架構 第二章 材料模擬與元件設計 2-1 元件材料設計 2-2 元件長度及分段設計介紹 2-3 光柵反射率與臨界增益模擬 第三章 元件製程步驟 3-1 光罩設計 3-2 製程流程 3-3 製程結果與討論 第四章 元件量測 4-1 傳統DFB雷射量測結果與討論 4-2 兩段式DFB雷射量測結果與討論 4-3 交錯式多段DFB雷射量測結果與討論 4-4 元件特性比較與討論 第五章 結論 5-1 成果與討論 5-2 未來研究方向 參考文獻

    [1] 楊淳良,趙亮琳, 「光纖通信網路」,五南圖書出版公司,民國96年。
    [2] L. G. Kazovsky, W. T. Shaw, D. Gutierrez, N. Cheng and S. W. Wong, “Next-Generation Optical Access Networks” IEEE Journal of Lightwave Technology, Vol. 25, No. 11, pp. 3428-3441, Nov. 2007.
    [3] Y. Luo, X. Zhou, F. Effenberger, X. Yan, G. Peng, Y. Qian and Y. Ma, “Time- and Wavelength-Division Multiplexed Passive Optical Network (TWDM-PON) for Next-Generation PON Stage 2 (NG-PON2),” IEEE Journal of Lightwave Technology, vol. 31, no. 4, pp. 587-593, Feb. 2013.
    [4] R. Rubenstein, “Passive Network Activity” Communications Design, pp. 33-34, Aug. 2012.
    [5] 盧廷昌, 王興宗, 「半導體雷射技術」,五南圖書出版公司,民國99年
    [6] L. A. Coldren, and S. W. Corzine, Diode lasers and photonic integrated circuits, John Wiley and Sons, NY, 1995.
    [7] S. O. Kasap, Optoelectronics and Photonics Principles and Praticles, Pearson, Ch. 4, (1999)
    [8] J. E. A. Whiteaway, G. H. B. Thompson, A. J. Collar and C. J. Armistead, “The Design and Assessment of /4 Phase-Shifted DFB Laser Structures” IEEE Journal of Quantum Electronics, Vol. 25, No. 6, pp. 1261-1279, JINE. 1989.
    [9] S. L. Lee, C. J. Wang, P. L. Jiang, I. F. Jang, H. W. Chang, C. L. Yao, C. C. Lin and W. J. Ho, “Two-Section Bragg-Wavelength-Detuned DFB Lasers and Their Applications for Wavelength Conversion” IEEE Journal of Selected Topics in Quantum Electronics, Vol. 11, No. 1, pp. 1153-1161, Sep. 2005.
    [10] 蔣珮泠, 「設計與製作新型分佈反饋式雷射」, 碩士論文,國立台灣科技大學,台北(2003)。
    [11] S. L. Lee, I. F. Jang, C. Y. Wang, C. T. Pien and T. T. Shih, “ Monolithically Integrated Multiwavelength Sampled Grating DBR Lasers for Dense WDM Applications” IEEE Journal of Selected Topics in Quantum Electronics, Vol. 6, No. 1, pp. 197-206, Jan. 2000.
    [12] Y. Shi, S. Li, L. Li, R. Guo, T. Zhang, L. Rui, W. Li, L. Lu and T. Song, “Study of the Multiwavelength DFB Semiconductor Laser Array Based on the Reconstruction-Equivalent-Chirp Technique” IEEE Journal of Lightwave Technology, Vol. 31, No. 20, pp. 3243-3250, Oct. 2013.
    [13] 游源晉, 「電致吸收調變雷射之積體化元件設計與製作」, 碩士論文,國立台灣科技大學,台北(2012)。
    [14] 張安欲, 「設計與製作具主動型布拉格反射鏡之可調式雷射」, 碩士論文,國立台灣科技大學,台北(2013)。
    [15] 杜長耕, 「雙量子井結構之光積體化元件設計與製作」,碩士論文,國立台灣科技大學,民國98年。

    QR CODE