研究生: |
SITI SULIKHAH SITI SULIKHAH |
---|---|
論文名稱: |
Comparison of Uniform Grating and Partially Corrugated Grating DFB Structures for High-Speed Directly Modulated Lasers Comparison of Uniform Grating and Partially Corrugated Grating DFB Structures for High-Speed Directly Modulated Lasers |
指導教授: |
李三良
San-Liang Lee |
口試委員: |
Da-Wei Ren
Da-Wei Ren Pinghui Yeh Pinghui Yeh Wen-Jeng Ho Wen-Jeng Ho |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電子工程系 Department of Electronic and Computer Engineering |
論文出版年: | 2017 |
畢業學年度: | 105 |
語文別: | 英文 |
論文頁數: | 112 |
中文關鍵詞: | 400 Gb/s Ethernet 、Direct-modulation lasers 、Uniform grating 、Partially corrugated grating 、Modulation bandwidth 、Cavity length |
外文關鍵詞: | 400 Gb/s Ethernet, Direct-modulation lasers, Uniform grating, Partially corrugated grating, Modulation bandwidth, Cavity length |
相關次數: | 點閱:461 下載:8 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
Future data center optical networks desired a high-speed laser to meet IEEE 802.3bs standard, which is defining an Ethernet speed of 400 Gb/s (4x100 Gb/s or 8x50 Gb/s) for network aggregation applications. The objectives of designing high-speed lasers are low-cost, reliable, and high performance. Direct-modulation of semiconductor lasers (DML) was proposing an attractive choice for large-capacity transmission. However, DMLs have some disadvantages, including a relatively small direct modulation bandwidth and the modulation induced chirp effects that prevent their high-speed applications. One of the solutions for enhancing modulation bandwidth of DMLs is using short cavity length. Practically, a shorter cavity length (L< 200 µm) is difficult to cleave and handle. The partially corrugated grating (PCG) structure is able to improve the resonance frequency of laser and provide a high immunity to external reflections.
In this thesis, the characteristics of DMLs with a uniform grating (UG) and partially corrugated grating (PCG) structures were analyzed and compared in various aspects. The simulated frequency response of DMLs agreed with the calculated results in terms of smaller modulation bandwidth for longer laser lengths. We have achieved a better dynamic performance by using PCG-DMLs against UG-DMLs for a data rate up to 50Gbps. PCG-DFB structures have obtained -3dB bandwidth of >30 GHz with a side-mode suppression ratio (SMSR) of>45dB by using a grating length of 150 µm for 200-µm long lasers. These enhancements make PCG-DMLs attractive as high-speed light sources for future broadband access networks.
Future data center optical networks desired a high-speed laser to meet IEEE 802.3bs standard, which is defining an Ethernet speed of 400 Gb/s (4x100 Gb/s or 8x50 Gb/s) for network aggregation applications. The objectives of designing high-speed lasers are low-cost, reliable, and high performance. Direct-modulation of semiconductor lasers (DML) was proposing an attractive choice for large-capacity transmission. However, DMLs have some disadvantages, including a relatively small direct modulation bandwidth and the modulation induced chirp effects that prevent their high-speed applications. One of the solutions for enhancing modulation bandwidth of DMLs is using short cavity length. Practically, a shorter cavity length (L< 200 µm) is difficult to cleave and handle. The partially corrugated grating (PCG) structure is able to improve the resonance frequency of laser and provide a high immunity to external reflections.
In this thesis, the characteristics of DMLs with a uniform grating (UG) and partially corrugated grating (PCG) structures were analyzed and compared in various aspects. The simulated frequency response of DMLs agreed with the calculated results in terms of smaller modulation bandwidth for longer laser lengths. We have achieved a better dynamic performance by using PCG-DMLs against UG-DMLs for a data rate up to 50Gbps. PCG-DFB structures have obtained -3dB bandwidth of >30 GHz with a side-mode suppression ratio (SMSR) of>45dB by using a grating length of 150 µm for 200-µm long lasers. These enhancements make PCG-DMLs attractive as high-speed light sources for future broadband access networks.
[1] M. Shirao, K. Kojima, and H. Itamoto, "53.2 Gb/s NRZ transmission over 10 km using high speed EML for 400GbE", in Opto-Electronics and Communications Conference (OECC), pp. 1-3, Shanghai, China, Jul. 2015.
[2] O. Tetsuro, H. Yidong, S. Kenji, and M. Yoshiharu, “Simulation and grating design of DFB-LDs for metropolitan area and access networks and their characteristics”, Proceedings of SPIE., vol. 4111, pp. 1-8, SPIE, San Diego, CA, Dec. 2000.
[3] H. Yidong, O.Tetsuro, S. Kazuhiro, M. Yoshiharu, S. Naofumi, and K. Kenichi, “External optical feedback resistant 2.5-Gb/s transmission of partially corrugated waveguide laser diodes over a -40 ◦C to 80 ◦C temperature range”, IEEE Photonics Technology Letters, vol. 11, no. 11, pp. 1482-1484, Nov. 1999.
[4] P. P. Devi, S.L. Lee, and G. Keiser, “Electroabsorption modulated lasers with high immunity to residual facet reflection by using lasers with partially corrugated gratings”, IEEE Photonics Journal, vol. 9, no. 2, pp. 1-16, Mar. 2017.
[5] P. J. Walraven, Design of grating sructures to reduce longitudinal spatial hole burning in distributed feedback lasers, Master Dissertation, Dept. Elect. Eng., Eindhoven University of Technology, Netherlands, Jan. 1995.
[6] R. Blum, "Optical transceiver trends for data center applications-how much photonic integration do we need?", in MIT Microphotonics Center Spring Meeting, pp. 1-24, Sidney St., Cambridge, Apr. 2015.
[7] M. J. Andrew, High-speed modulation of semiconductor lasers and properties of silver-coated quantum-dot lasers, Master Dissertation, Dept. Elect. and Comp. Eng., University of Illinois, Urbana, Illinois, May, 2010.
[8] M. Yasuhiro, S. Richard, P. Thang, A. L. William, C. Glen, M. D. Henry, A. David, S. Tsurugi, and R. Charles, “55 GHz bandwidth distributed reflector laser”, Journal of Lightwave Technology, vol. 35, no. 3, pp. 397-403, Feb. 2017.
[9] Y. Tsuyoshi, “High-speed directly modulated lasers”, in The National Fiber Optic Engineers Conference, pp. 1-39, Los Angeles, CA, Mar. 2012.
[10] T. Tadokoro, W. Kobayashi, T. Fujisawa, T. Yamanaka, and F. Kano, “High-speed modulation lasers for 100GbE applications”, in Optical Fiber Communication Conference, pp. 1-3, Los Angeles, CA, Mar. 2011.
[11] C. A. Larry, Corzine W. Scott, and M. Milan, Diode lasers and photonic integrated circuits, 2nd ed., John Wiley & Sons. Inc., New Jersey, 1995.
[12] H. Kiyo, T. Takashi, and A. Koichiro, "Multichannel 1.3-um lens-interated surface-emitting DFB laser (LISEL) arrays for high-speed optical interconnects at 100Gbps and beyond”, in ESOC Workshop-Technologies for Short Reach Optical Interconnects, pp. 1-23, London, UK, Sep. 2013.
[13] S. Laurent, K. M. Daniel, and B. F. Alan, "Optics in future data center networks", in 18th IEEE Symposium on High Performance Interconnects, pp. 1-5, Mountain View, CA, Aug. 2010.
[14] K. Adachi, K. Shinoda, T. Kitatani, D. Kawamura, T. Sugawara, and S. Tsuji, “40-Gb/s/ch operation of 1.3-μm four-wavelength lens integrated surface-emitting DFB laser array”, in 23rd Semiconductor Laser Conference, pp. 1-2, San Diego, CA, Oct. 2012.
[15] K. Christoforos, K. Konstantinos, ans T. Ioannis, “Optical interconnection networks in data centers: recent trends and future challenges”, IEEE Communications Magazine, vol. 5, no. 9, pp. 39-45, Sep. 2013.
[16] T. Fujisawa, S. Kanazawa, K. Takahata, W. Kobayashi, T. Tadokoro, H. Ishii, and F. Kano, "1.3-µm, 4x 25-Gbit/s, EADFB laser array module with large output-power and low-driving-voltage for energy-efficient 100GbE transmitter”, Optics Express, vol. 20, no. 1, pp. 614-620, Jan. 2012.
[17] C. John, W. James, and P. Dick, Distributed feedback semiconductor lasers, Institution of Engineering and Technology, Stevenage, UK, 1998.
[18] R. G. Hunsperger, Integrated optics: theory and technology, 6th ed., Newark, USA, 1992.
[19] H. Kressel, M. Ettenberg, J. P. Wittke, and I. Ladany, "Laser diodes and LEDs for fiber optical communication", Topics in Applied Physics, vol. 39, pp. 9-62, Jun. 2005.
[20] K. Gerd, Optical fiber communications, 4th ed., McGraw-Hill, Asia, 2010.
[21] L. Allen, Essential of lasers, 1st ed., Pergamon Press, Australia, 1969.
[22] W. Jianming, and P. Klaus, "Small signal analysis for dispersive optical fiber communication systems", Journal of Lightwave Technology, vol. 1, no. 1, pp. 96-100, Jan. 1992.
[23] G. P. Agrawal, and N. K. Dutta, Semiconductor laser, 2nd ed., Van Nostrand Reinhold, New York, 1993.
[24] T. Erdogan, "Fiber grating spectra", Journal of Lightwave Technology, vol. 15, no. 8, pp. 1277-1294, Aug. 1997.
[25] G. P. Agrawal, Fiber-optic communication systems, 4th ed., John Wiley & Sons, Inc., New York, 2010.
[26] M. Gotoda, T. Nishimura, K. Matsumoto, T. Aoyagi, and K. Yoshiara, "Highly external optical feedback-tolerant 1.49-m single-mode lasers with partially corrugated gratings", IEEE Journal Selected Topics in Quantum Electronics, vol. 15, no. 3, pp. 612-617, Apr. 2009.
[27] V. Markku, Diode lasers with optical feedback and optical injection, Doctoral Dissertation, Dept. Of Elect. And Comm. Eng., Helsinki University of Technology, Finland, Mar. 2006.
[28] J. Shimizu, H. Yamada, S. Murata, A. Tomita, M. Kitamura, and, A. Suzuki, "Optical-confinement-factor dependencies of the K factor, differential gain, and nonlinear gain coefficient for 1.55 mu m InGaAs/InGaAsP MQW and strained-MQW lasers", IEEE Photonics Technology Letters, vol. 3, no. 9, pp. 773-776, Sept. 1991.
[29] P. B. Johns, and L. B. Raymond, "Numerical solution of 2-dimensional scattering problems using a transmission-line matrix", Proceedings of the Institution of Electrical Engineers, vol. 118, no. 9, pp. 1203-1208, IEEE, Notts., England, Sept. 1971.
[30] "VPIcomponentMaker 8.5 Active Photonics User’s Manual", VPIsystems Inc., 2010.
[31] A. J. Lowery, "New dynamic semiconductor laser model based on the transmission-line modelling method", IEE Proceedings-Optoelectronics, vol. 134, no. 5, pp 281-289, IEE, Notts., UK, Oct. 1987.
[32] M. Toshihiko, "1.55 µm high speed partly gain coupled DFB lasers with periodically strained-layer quantum wells", International Journal of High Speed Electronics and Systems, vol. 8, no. 3, pp 475-494, Sept. 1997.
[33] T. P. Lee, Current trends in integrated optoelectronics, 1st ed., World Scientific, Singapore, 1994.
[34] N. L. Radhakrishnan, “Carrier transport effects in high speed quantum well lasers”, in Ultrafast Electronics and Optoelectronics, vol. 14, pp. 1-3, OSA, San Fransisco, CA, Jan. 1993.
[35] K. Przemyslaw, "Are carrier transport effects important for chirp modeling of quantum-well lasers?", Advanced in Electronic and Telecommunications, vol. 1, no. 2, pp. 63-66, Nov. 2010.
[36] K. A. Williams, P. S. Griffin, I. H White , B. Garrett, J. E. A.Whiteaway, and G. H. B Thompson, "Carrier transport effects in long-wavelength multiquantum-well lasers under large-signal modulation", IEEE Journal of Quantum Electronics, vol. 30, no. 6, pp. 1355-1357, Jun. 1994.