研究生: |
Andrew Christian Herwanto Santoso Andrew - Christian Herwanto Santoso |
---|---|
論文名稱: |
Displacement-Based Design for Precast Segmental Concrete Columns & Splitting Bond Behavior of No. 14 Bars Grouted in Steel Corrugated Ducts Displacement-Based Design for Precast Segmental Concrete Columns & Splitting Bond Behavior of No. 14 Bars Grouted in Steel Corrugated Ducts |
指導教授: |
歐昱辰
Yu-Chen Ou |
口試委員: |
黃世建
Shyh-Jiann Hwang 李宏仁 Hung-Jen Lee |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 營建工程系 Department of Civil and Construction Engineering |
論文出版年: | 2013 |
畢業學年度: | 101 |
語文別: | 英文 |
論文頁數: | 220 |
中文關鍵詞: | corrugated duct 、splitting failure 、unbonded length 、beam-end test specimens 、hysteretic behavior 、displacement based design 、precast segmental column |
外文關鍵詞: | splitting failure, corrugated duct, hysteretic behavior, unbonded length, beam-end test specimens, displacement based design, precast segmental column |
相關次數: | 點閱:253 下載:7 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
Abstract (Displacement-Based Design for Precast Segmental Concrete Columns)
Precast concrete bridge construction has been proved to be an efficient solution in accelerating bridge construction and minimizing traffic disruption. However, due to concerns with the seismic performance of such type of construction, its application in seismic regions is limited. This research presents results of the development method to predict the real behavior of precast segmental post-tensioned concrete bridge columns for use in seismic regions. The developed bridge columns adopted unbonded post-tensioning systems to decrease prestress loss due to strong seismic events. In addition, to increase hysteretic energy dissipation, mild steel energy dissipation bars (ED bars) which are continuous across the segment joints are added to the columns. Moreover, The ED bars are additionally unbonded at the critical joint to avoid premature fracture.
The improved method adopted from Displacement Based Design (DBD) has been developed to achieve the good understanding about the behavior of the precast segmental concrete column. The modification in the damping theory corresponding to the equivalent viscous damping of the hysteretic behavior of the precast has been reexamined. A simplified analytical model for static pushover analysis proposed by Ou et al. (2010) has been adopted to predict the capacity and the yield displacement of the column. In addition, a stiffness degrading hysteretic model for response-history analysis which has been proposed by Ou et al (2007) is conducted to examine the seismic performance of the proposed columns with different design parameters.
Design recommendations for the proposed segmental bridge column are presented, and are illustrated by a design example.
Abstract (Splitting Bond Behavior of No. 14 Bars Grouted in Steel Corrugated Ducts)
Recently, many applications in the construction engineering have been growing rapidly. The latest development research was conducted is about joint connection performance. Because amount of uncertainty in this application, it is quite interesting to conduct the experiment related to joint connection behavior. The use of a few large-diameter reinforcing bars for the construction of precast concrete bridge bents allows simplified construction by reducing the number of alignments to be made in the field. These bars are grouted into ducts in some connection application in the precast concrete bridge construction. In the proposed precast concrete substructure system, the grouted bars carry tensile forces across the joint connection. This joint is the yielding element in the structural system, and it is crucial to the performance of the structure that the bars yield before other failure mechanisms, including bond failure, occur. Use large bar-diameter bar in the connection can provide benefits with reducing the depth of the embedded length of the connection which commonly require and restricted by American Association of State Highway and Transportation Officials (AASHTO) bridge code in bridge application system. Designers and contractors prefer this type of precast connection over other types because the volume of grout that is required to complete the connection is minimized.
For this project, 17 splitting tests were conducted to determine the bond characteristics and development length of large-diameter bars grouted into ducts. The main test parameters that influence connection performance are identified. The bars tested in size #14. Splitting tests conducted with embedment lengths of at least seven, nine and eleven bar diameters. The splitting failure was expected to be the failure mode, when consider applying thin cover depth in the connection. The tests and subsequent analysis showed that the bond of these grouted connections is significantly better than the bond of bars cast directly into concrete. Furthermore, amount of number transverse reinforcement bar in the embedded length also contribute to increase the bond capacity. The development lengths needed to fully anchor the bar are therefore within the available depth requirement.
Results from seventeen large scale beam-end tests are reported, and the effects of the studied parameters on connection behavior are evaluated. A simple phenomenological bond-slip model is presented that can be used to estimate the observed behavior. The development of the anchorage design provisions considers the stress in the connectors at service load levels. Observed splitting modes of failure are precluded by incorporating adequate levels of safety in the development of the design recommendations.
Abstract (Displacement-Based Design for Precast Segmental Concrete Columns)
Precast concrete bridge construction has been proved to be an efficient solution in accelerating bridge construction and minimizing traffic disruption. However, due to concerns with the seismic performance of such type of construction, its application in seismic regions is limited. This research presents results of the development method to predict the real behavior of precast segmental post-tensioned concrete bridge columns for use in seismic regions. The developed bridge columns adopted unbonded post-tensioning systems to decrease prestress loss due to strong seismic events. In addition, to increase hysteretic energy dissipation, mild steel energy dissipation bars (ED bars) which are continuous across the segment joints are added to the columns. Moreover, The ED bars are additionally unbonded at the critical joint to avoid premature fracture.
The improved method adopted from Displacement Based Design (DBD) has been developed to achieve the good understanding about the behavior of the precast segmental concrete column. The modification in the damping theory corresponding to the equivalent viscous damping of the hysteretic behavior of the precast has been reexamined. A simplified analytical model for static pushover analysis proposed by Ou et al. (2010) has been adopted to predict the capacity and the yield displacement of the column. In addition, a stiffness degrading hysteretic model for response-history analysis which has been proposed by Ou et al (2007) is conducted to examine the seismic performance of the proposed columns with different design parameters.
Design recommendations for the proposed segmental bridge column are presented, and are illustrated by a design example.
Abstract (Splitting Bond Behavior of No. 14 Bars Grouted in Steel Corrugated Ducts)
Recently, many applications in the construction engineering have been growing rapidly. The latest development research was conducted is about joint connection performance. Because amount of uncertainty in this application, it is quite interesting to conduct the experiment related to joint connection behavior. The use of a few large-diameter reinforcing bars for the construction of precast concrete bridge bents allows simplified construction by reducing the number of alignments to be made in the field. These bars are grouted into ducts in some connection application in the precast concrete bridge construction. In the proposed precast concrete substructure system, the grouted bars carry tensile forces across the joint connection. This joint is the yielding element in the structural system, and it is crucial to the performance of the structure that the bars yield before other failure mechanisms, including bond failure, occur. Use large bar-diameter bar in the connection can provide benefits with reducing the depth of the embedded length of the connection which commonly require and restricted by American Association of State Highway and Transportation Officials (AASHTO) bridge code in bridge application system. Designers and contractors prefer this type of precast connection over other types because the volume of grout that is required to complete the connection is minimized.
For this project, 17 splitting tests were conducted to determine the bond characteristics and development length of large-diameter bars grouted into ducts. The main test parameters that influence connection performance are identified. The bars tested in size #14. Splitting tests conducted with embedment lengths of at least seven, nine and eleven bar diameters. The splitting failure was expected to be the failure mode, when consider applying thin cover depth in the connection. The tests and subsequent analysis showed that the bond of these grouted connections is significantly better than the bond of bars cast directly into concrete. Furthermore, amount of number transverse reinforcement bar in the embedded length also contribute to increase the bond capacity. The development lengths needed to fully anchor the bar are therefore within the available depth requirement.
Results from seventeen large scale beam-end tests are reported, and the effects of the studied parameters on connection behavior are evaluated. A simple phenomenological bond-slip model is presented that can be used to estimate the observed behavior. The development of the anchorage design provisions considers the stress in the connectors at service load levels. Observed splitting modes of failure are precluded by incorporating adequate levels of safety in the development of the design recommendations.
REFERENCE (Displacement-Based Design for Precast Segmental Concrete Columns)
AASHTO. (2004). AASHTO LRFD Bridge Design Specifications, 3rd Edition, Washington, D.C.
Blandon C.A., “Equivalent Viscous Damping Equations for Direct Displacement Based Design”. A Dissertation Submitted in Partial of the Requirements for the Master Degree in Earthquake Engineering 2004; Rose School; European School if Advance Studies in Reduction of Seismic Risk.
Federal Emergency Management Agency (FEMA). (2000). “ Prestandart and Commentary Rehabilitation of Buildings.” FEMA-356, Washington, D.C.
Kwan W-P, Bilington S.L., “Influence of Hysteretic Behavior on Equivalent Period and Damping of Structural Systems”. Journal of Structural Engineering 2003; 10.1061/(ASCE)0733-9445(2003)129:5(576)
Lin, J.-C., and Mo, Y.-L. (2000). “The shear transfer behavior of precast prestressed hollow rectangular bridge columns”. M. S. Thesis, Dept of Civil Engineering, National Cheng Kung University, Tainan, Taiwan (in Chinese)
Ou Y-C, Chiemanichakorn M., Aref A.J., Lee GC. “ Seismic Performance of Segmental Precast Unbonded Posttensioned Concrete Bridge Columns”. Journal of Structural Engineering 2007; 10.1061/(ASCE)0733-9445(2007)133:11(1636)
Ou Y-C, Wang P-H, Tsai M-S, Chang K-C, Lee GC. “Large-scale experimental study of precast segmental unbonded post-tensioned concrete bridge columns for seismic regions.” Journal of Structural Engineering 2009; 10.1061/(ASCE)ST.1943-541X.0000110.
Ou Y-C, Tsai M-S, Chang K-C, Lee GC. “Cyclic behavior of precast segmental concrete bridge columns with high performance or conventional steel reinforcing bars as energy diddipation bars.” Earthquake Engng Struct. Dyn. 2010; DOI: 10.1002/eqe.986
Wang J-C, Ou Y-C, Chang KC, Lee GC. “Large-scale seismic tests of tall concrete bridge columns with precast segmental construction”. Earthquake Engineering and Structural Dynamics 2008; 37(12):1449–1465.
REFERENCE (Splitting Bond Behavior of No. 14 Bars Grouted in Steel Corrugated Ducts)
ACI Committee 318 (1971) “Building Code Requirements for Reinforced Concrete,” ACI 318-71, American Concrete Institute, Detroit, MI.
ACI Committee 318 (2002). “Building Code Requirements for Structural Concrete and Commentary,” ACI 318-02/ACI 318R-02, American Concrete Institute, Farmington Hills, MI. ACI Committee 318 (2005). “Building Code Requirements for Structural Concrete and Commentary,” ACI 318-05/ACI 318R-05, American Concrete Institute, Farmington Hills, MI.
ACI Committee 550 (2001). “Emulating Cast-in-Place Detailing in Precast Concrete Structures,” ACI 550.1R-01, American Concrete Institute, Farmington Hills, MI.
AASHTO (2004). LRFD Bridge Design Specifications, 3rd ed., Association of State Highway and Transportation Officials, Washington, DC.
ASTM A944-05. Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Beam-End Specimens, ASTM international 2005, United States.
Brenes, F.J. (2005). “Anchorage of Grouted Vertical Duct Connectors for Precast Bent Caps,” Dissertation, University of Texas, Department of Civil, Architectural and Environmental Engineering, Austin, TX.
Darwin, D., and Salamizavaregh, S. (1993). “Bond Strength of Grouted Reinforcing Bars,” Structural Engineering and Engineering Materails Report no. SM 32, University of Kansas Center for Research, Inc., Lawrence, KS
Ferguson, P. M., Breen, J. E., and Jirsa, J. O. (1988). Reinforced Concrete Fundamentals, 5th edition, John Wiley and Sons, Inc., New York, NY.
Goto, Y. (1971). “Cracks Formed in Concrete around Deformed Tension Bars,” Journal, American Concrete Institute, Vol. 68, No. 4.
Kyle P. Steuck, Jason B.K. Pang, Marc O. Eberhard, John F. Stanton (2007).” Anchorage of Large-Diameter Reinforcing Bars Grauted into Ducts,” Technical Report Washington State Transportation Center (TRAC), Washington, DC.
Matsumoto, E. E. (2003). “Development of a Precast Bent Cap System for Seismic Regions,” Lake Belton Bridge-Precast Concrete Bent Cap Demonstration Workshop, FHWA/AASHTO/TxDOT, Temple, TX.
Matsumoto, E. E., Waggoner, M. C., Sumen, G., Kreger, M. E., Wood, S. L., and Breen, J. E. (2001). “Development of a Precast Bent Cap System,” Research Report 1748-2, Center for Transportation Research, University of Texas at Austin.
Orangun, C. O., Jirsa, J. O., and Breen, J. E. (1977). “Reevaluation of Test Data on Development Length and Splices,” Journal, American Concrete Institute, Vol. 74, No. 3
Restrepo, J. I., Park, R., and Buchanan, A. H. (1993). “The Seismic Behavior of Connections Between Precast Concrete Elements,” Research Report No. 93-3, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand