研究生: |
邱鈺婷 Yu-Ting Chiu |
---|---|
論文名稱: |
可擴充式列印控制系統用於大型噴墨列印機之設計與實作 Design and Implementation of a Scalable Printing Control System for Large-scale Inkjet Printers |
指導教授: |
阮聖彰
Shanq-Jang Ruan |
口試委員: |
呂政修
Jenq-Shiou Leu 陳維美 Wei-Mei Chen 林昌鴻 Chang Hong Lin |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電子工程系 Department of Electronic and Computer Engineering |
論文出版年: | 2015 |
畢業學年度: | 103 |
語文別: | 英文 |
論文頁數: | 52 |
中文關鍵詞: | 噴墨印刷系統 、FPGA 、MCU 、非對稱式 S 波形動作軌跡 |
外文關鍵詞: | Inkjet printing control system, FPGA, MCU, Asymmetric S-curve |
相關次數: | 點閱:207 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
常見於大型數位噴墨列印機中,以使用多個噴墨頭增加列印面積來提升列印速度,造成印刷資料量以及驅動噴頭的硬體資源需求也隨之提高。因此,本論文藉由調整資料封包以及硬體電路設計提出一個可擴充性的列印控制系統。
在本篇論文中,資料封包的設計是依據噴頭的排列方式,進而決定資料封包的內容,以簡化封包的大小來提升傳輸速度。在硬體架構的設計分成三大部分,分別為資料分配和程序監控、噴頭驅動控制以及機構動作控制,以 FPGA 執行列印資料的配置以及噴頭驅動控制信號,搭配 MCU 用於監控列印機的操作流程及行為,以及伺服馬達做為噴頭移動的控制器,並且採用非對稱式 S 波形做為動作控制的軌跡,來減少餘震的產生。
最後實驗結果顯示,本論文提出的系統架構可依據噴頭安裝數量進行擴充控制且使得大型數位噴墨列印機在列印的過程中穩定的移動。
Commonly, a large-scale inkjet printer with many inkjet print-heads speeds up printing due to the printing area is enlarged. Therefore, the hardware resources of the print-head driver and the printing data should be increased demand. Hence, this thesis proposed a scalable printing control system is based on image data packet design and a new hardware design. To simplify the image data packet with high data transmission rate, the packet is generated by considering the arrangement of print-heads. Moreover, the new hardware design consists of three portions which are the data distribution and process monitor, the print-head driver control, and the mechanical motion control. Thus, FPGAs are used to allocate the image data and produces the print-head driver control signals. Furthermore, MCUs are used to monitor the procedures and mechanical motions. Besides, the movement of print-heads is controlled by a servo motor with an asymmetric s-curve motion trajectory. The experimental results demonstrate that the proposed control system is flexible to control multiple print-heads and the operation of the large-scale inkjet printer is stable.
[1] Q. Lin, J. Liu, and D. Tretter, “Printing in a Digital Age,” in IEEE Computer Society on Mechatronics, in IEEE MultiMedia, vol. 17, no. 4, pp. 100,107, Oct.- Dec. 2010.
[2] P. Calvert, Y. Yoshioka, and G. Jabbour, “Inkjet Printing for Biomimetic and Biomedical,” in Learning from Nature How to Design New Implantable Biomaterialsis: From Biomineralization Fundamentals to Biomimetic Materials and Processing Routes. Springer Netherlands, pp. 169-180, 2005.
[3] D. J. Tyler, “Textile digital printing technologies,” in Textile Progress, vol. 37, no. 4, pp. 1-65, 2005.
[4] N. Mathews, Y. Lam, and M. Mhaisalkar, “Printing materials for electronic devices,” in International Journal of Materials Research, vol. 101, No. 2, pp. 236-250, 2010.
[5] J. Mujal, E. Ramon, E. Díaz, J. Carrabina, A. Calleja, R. Martínez, L. Teres, “Inkjet printed antennas for NFC systems,” in 2010 17th IEEE International Conference on Electronics, Circuits, and Systems (ICECS), pp.1220-1223, Dec. 2010.
[6] Q. Hua, “Study on the development trend of the digital printing,”in International Conference on Uncertainty Reasoning and Knowledge Engineering (URKE) , vol.1, pp.149,153, Aug. 2011.
[7] M. Vrhel, E. Saber, H. J. Trussell, “Color image generation and display technologies,” in IEEE Signal Processing Magazine, vol.22, no.1, pp.23-33, Jan. 2005.
[8] J. W. Birkenshaw, “Printing processes,” in The Printing Ink Manual, pp. 14-85, 1993.
[9] J. Bolder, T. Oomen, S. Koekebakker, and M. Steinbuch, “Using iterative learning control with basis functions to compensate medium deformation in a wide-format inkjet printer,” in Mechatronics, vol. 24, no. 8, pp. 944-953, 2014.
[10] Y. C. Chang, “An Integrated Test and Monitoring of an Ink-jet Print Servo System,” Unpublished master’s thesis, National Tsing Hua University, Hsinchu, Taiwan, R.O.C., 2008.
[11] S. Mei, Q. Xu, Z. Zhang, and H. You, “The control system and data transferring format of digital printing device,” in 2nd International Conference on Industrial Mechatronics and Automation (ICIMA), vol. 2, pp. 549-552, 2010.
[12] L. Chong, Y. Zebin, P. Hu, “Design of a kind of inkjet printer control system,” in Journal of Mechanical and Electrical Engineering, vol. 27, no. 8, pp. 23-35, 2010.
[13] TTP Meteor Ltd., “METEOR Software User Manual,” 2014.
[14] I. Endo, T. Komatsu, and Y. Takasu, “Process and apparatus for fixing toner with heat and a fixing agent,” U.S. Patent No. 4,132,882. 2, Jan. 1979.
[15] M. Ezzeldin, P. P. J. van den Bosch, and S. Weiland, “Toward better printing quality for a drop-on-demand ink-jet printer: improving performance by minimizing variations in drop properties,” in IEEE Control Systems, vol. 33, no. 1, pp. 42-60, Feb. 2013.
[16] J. Brünahl, A. M. Grishin, and D. Tretter, “Piezoelectric shear mode drop-on-demand inkjet actuator,” in Sensors and Actuators A: Physical, vol. 101, no. 3, pp. 371-382, Oct. 2002.
[17] National Instruments Corporation, “Fundamentals of Motion Control,” 2014.
[18] Performance Motion Devices, Inc., “Mathematics of Motion Control Profiles,” in Performance Motion Devices.
[19] K. Doangnguyen, N. Teckchew, and C. Iming, “On Algorithms for Planning S-curve Motion Profiles,” in International Journal of Advanced Robotic Systems, vol. 5, no. 1, pp. 99-106, 2008.
[20] K. Hoshijima and M. Ikeda, “Vibration suppression control for mechanical transfer systems by jerk reduction,” Int. J. Control Autom. Syst., vol. 5, no. 6, pp. 614–620, Dec. 2007.
[21] H. Z. Li, Z. M. Gong, W. Lin, and T. Lippa, “Motion profile planning for reduced jerk and vibration residuals,” SIMTech Tech. Rep., vol. 8, no. 1, pp. 32–37, Jan.–Mar. 2007.
[22] B. H. Chang and Y. Hori, “Trajectory design considering derivative of jerk for head-positioning of disk drive system with mechanical vibration,”IEEE/ASME Trans. Mechatronics, vol. 11, no. 3, pp. 273–279, Jun. 2006.
[23] S. Macfalane and E. A. Croft, “Jerk-bounded manipulator trajectory planning: Design for real-time applications,” in IEEE Transactions on Robotics and Automation, vol. 19, no. 1, pp. 42–52, Feb. 2003.
[24] T. Atsumi and W. C. Messner, “Optimization of head-positioning control in a hard disk drive using the RBode plot,” IEEE Trans. Ind. Electron, vol. 59, no. 1, pp. 521–529, Jan. 2012.
[25] F. Zou, D. Qu, F. Xu, “Asymmetric s-curve trajectory planning for robot point-to-point motion, ” in IEEE International Conference on Robotics and Biomimetics (ROBIO), pp. 2172-2176, Dec. 2009.
[26] K. H. Rew and K. S. Kim,“A Closed-Form Solution to Asymmetric Motion Profile Allowing Acceleration Manipulation,” in IEEE Transactions on Industrial Electronics, vol. 57, no. 7, pp. 2499 - 2506, July 2010.