研究生: |
林家全 Cha-Chuan Lin |
---|---|
論文名稱: |
黃氏富勒配比設計法於鋼纖維混凝土高完整性承裝容器應用之研究 The Design and Application of Steel Fiber Reinforced Concrete Material for Making High Integrated Container by Using Hwang-Fuller’s Densified Mixture Design Algorithm |
指導教授: |
黃兆龍
Chao-Lung Hwang |
口試委員: |
楊錦懷
none 潘誠平 none 黃慶村 none |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 營建工程系 Department of Civil and Construction Engineering |
論文出版年: | 2007 |
畢業學年度: | 95 |
語文別: | 中文 |
論文頁數: | 230 |
中文關鍵詞: | 富勒緻密曲線 、鋼纖維加強混凝土 、緻密堆積 、高強度 、高耐久性 、高完整性承裝容器 |
外文關鍵詞: | dense pile, steel fiber reinforced concrete, Fuller’s Densified Mixture Design Algorithm, high strength, high durability, high integrated container |
相關次數: | 點閱:179 下載:12 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本研究應用以富勒緻密曲線搭配緻密堆積的觀念為配比設計之主體構架,並添加適量不同型式之纖維所組成不同質與量組合之混凝土材料,以高強度及高耐久性為設計目標,同時將各種材料之料源、配比及拌製過程,制定出標準作業程序,並詳細觀察其新拌、硬固及耐久性行為。最後選定最佳化配比,並按標準程序拌製實尺寸高完整性承裝容器,俾能進行過程修正及討論,本研究變數設計為水膠比(0.24,0.28,0.32),裹漿厚度為(5,15,25μm),纖維含量為(0~0.3%),試驗結果顯示,漿質愈佳(W/B≦0.28),漿量厚度愈小(≦25μm)以及鋼纖維含量愈高(≧0.3%)之配比,在抗壓強度方面優於傳統混凝土配比(ACI)約39.7%,抗拉強度方面約36.6%,在耐久性方面亦可符合規範要求。最後本研究製作之高完整性承裝容器品質( >69MPa、 >7 MPa、乾縮量<300μm)皆高於法國高完整性承裝容器之標準。
n this research, we take dense pile of Fuller’s Densified Mixture Design Algorithm as our main component of basic design , another we had acceded to the concrete materials of different quality and quantity that the fiber of the right amount different model makes up. Regard high strength and high durability as the design object, At the same time make source, matching and course of mixing of various kinds of materials the standard operation procedure, and observe its mixing newly, hard firm and durable sexual behavior in detail. Finally, select optimization matching and make the container of the same proportion according to the standardization operation program for revise and discuss the course. In this research, the parameter is designed for water binder ratio (0.24,0.28,0.32), coating thickness(5,15,25μm) and fibre content(0~0.3%).Showing to the results tested under various kinds of parameter terms, the better the paste quality(w/b≦0.28), the less the coating thickness(≦25μm), higher steel fibber content(≧0.3%) In compression strength is higher than traditional concrete (ACI) about 39.7%, tensile strength is about 36.6%, also can accord with the demand of standardizing in durability. At last the quality( >69MPa、 >7 MPa、amount of shrinking<300μm) of high integrated container made in this research is all higher than the standard of France.
1. James, T.D.,”Crack Controlled Maximum Durability for Low Level Radioactive Waste Disposal”,ACI Concrete International,Vol.15,No.12(1993).
2. Aticin,P.C.and Adam,N.,”High-Performance Concrete Demystified”,ACI Concrete International Vol.15,No.1(1993).
3. Robert,D.A.and Harold,L.B.,”Concrete Design for Sealing A Nuclear Waste Repository”,ACI Concrete International Vol.9,No.8(1987).
4. Hwang,C.L.,J.J.Liu,L.S.Lee,F.Y.Lin,”Densified Mixture Design Algorim:Then and Ecorly Properties of High Performance Concrete”,Journal of Chinese and Hydraulic Engineering, Vol.18,No.2,PP.207-219,(1996).
5. 高性能混凝土研討會論文集,土木水利工程學會及結構工程學會,台北(1993)。
6. 黃兆龍, 混凝土性質與行為,詹氏書局,臺北(2002)。
7. 核能資訊透明化資訊系統,網頁資料http://wapp4.taipower.com.tw/nsis/WasteTreat-3.asp
8. 新核家園美麗新世界,網頁資料(http://www.newnuclearhome.com/pages/environment/nuclearWast.htm)
9. 原子能委員會(1996), 低放射性廢料陸地最終處置管制。
10. World Nuclear Association (2003), World Nuclear Power Reactors 2002-03 and Uranium Requirements, 網頁資料(http://www.world-nuclear.org/info/reactors.htm)。
11. UI, Worldwide Advances in Radioactive Waste Management, January 1998 to June 1999, http://www.uilondon.org/waste/report99/waste_5e.pdf, 1999
12. NEA, Low-Level Radioactive Waste Repositories:An Analysis of Costs, OECD/NEA, 1999
13. IAEA. (1993), The Radioactive Waste Management Glossary, Vienna: IAEA.
14. 2002,「ROKKASHO THE FOCUS OF WORLD」及六個所村勢要覽,期刊台電核後端營運處。
15. U. S. Energy Information Administration (2001), Annual energy review- Electricity, 網頁資料(http://www.eia.doe.gov/emeu/aer/elect.html)
16. 隧道工程材料,中鐵川博岩土科技公司圖書。
17. 黃兆龍,「低放射性硫酸鈉固化廢料高性能容器研發」,行政原子能委員會專題研究計劃成果發表會(1995)。
18. 黃兆龍,「高性能混凝土阻抗及電滲行為研究」,行政原子能委員會專題研究計劃成果發表會(1997)。
19. 黃兆龍,「低放射性硫酸鈉固化廢料高性能容器研發」,行政原子能委員會專題研究計劃成果發表會(1998)。
20. 黃兆龍,「高性能混凝土覆工版開發研究案」,期末報告,台灣科技大學,(2003)。
21. 葉淑通,「以理想級配曲線估算粒料緻密混合比及飛灰水泥漿包裹厚度評估混凝土性質之探討」,國立台灣科技大學碩士論文,臺北(2005)。
22. 張建智,「以粒料表面積及裹漿厚度模式設計高性能混凝土並探討其工程性質」,國立台灣科技大學碩士論文,臺北(2005)。
23. 陳俊村,「黃氏富勒緻密配比計法於鋼纖維混凝土枕材料設計應用之研究」,碩士論文,國立台灣科技大學營建工程技術研究所,台北(2006)。
24. 聚丙烯纖维混凝土的耐磨损及抗衝擊性能研究 Resistances of impact and abrasion for polypropylene fiber concrete [混凝土 Concrete] 刘卫东 , 王依民 , LIU Wei-dong , Wang Yi-min。
25. 李嘉銘(黃兆龍指導),「添加PP纖維對優生混凝土體積穩定性之影響」,碩士論文,國立台灣科技大學營建工程技術研究所,台北(2000)。
26. 楊偉奇(黃兆龍指導),「優生混凝土耐久性質之研究」,碩士論文,國立台灣科技大學營建工程技術研究所,台北(1999)。
27. 黃兆龍,洪盟峰,湛淵源(2002),「ACI混凝土規範與緻密配比在防蝕耐久性設計之差異評估」,防蝕工程,第十六卷,第四期,第281~296頁。
28. Li, L.S., and C.L. Hwang(2002), “A Quality Assurance System of SCC in Taiwan,” The Proceedings of First North American Conference On the Design And Use of Consolidating Concrete, ACBM, pp.275-280.
29. Hwang , C.L., C.T. Tsai, L.S. Li, and Y.Y. Chen(2004), “Durability Design and Application of Eighth High-Volume Fly Ash Fiber Reinforced Concrete Composites in Taiwan,” The Supplementary Volume Of CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and natural Pozzolans in Concrete, pp. 572-586, Las Vegas.
30. Guide to Durable Concrete ACI Committee 201, ACI materials Journal, 88(5), 1991.
31. 李金輝,「黃氏富勒緻密配比設計法應用於活性粉混凝土性質之研究」,碩士論文,國立台灣科技大學營建工程技術研究所,台北(2006)。
32. 宋佩瑄,“纖維混凝土概論及加強原理”,特殊纖維在混凝土補強應用研討會,工業技術研究院化學工業研究所,1988。
33. 宋佩瑄,“混凝土工程中如何選用適當的纖維材料”,纖維混凝土在工程上的應用與發展研討會,台灣營建研究院,1998。Bakker , R.F.M. in Proceedings , 1th International Conference.
34. 柴希文,“聚丙烯纖維混凝土的工程性質”,纖維混凝土在工程上的應用與發展研討會,台灣營建研究院,1998。
35. 蔡文豐,「新拌混凝土澆置現場品管技術之研究」,碩士論文,朝陽科技大學營建工程研究所,台北(2002)。
36. 裹砂石法配製C80∼C90高性能混凝土試驗,王一光 馬克 張然 何軍 餘以海。
37. 羅心妤,「強塑劑質與量對混凝土性質之影響」,碩士論文,國立台灣科技大學營建工程技術研究所,台北(2002)。
38. 高呈毅,「鋼纖維噴凝土在台灣隧道工程上應用」,財團法人中興工程顧問社,pp.18-26.(1997)
39. by Ziad Bayasi and Kevin Downey,” Steel Fiber Reinforced Piles at Horse Mesa Dam”, Concrete International,june,pp.32-36 (1995)。
40. 賴森榮,「纖維混凝土之發展與應用」,財團法人台灣營建研究中心,台北(1983)。
41. Robert J. Ward and Victor C. Li, “Dependent of Flexural Behavior of Fiber Reinforced Mortar on Material Fracture Resistance and Beam Size”, ACI Materials Journal, November-December, pp.627-637 (1990)。
42. Vellore S. Gopalaratnam, Surendra P. Shah, Gordon B. Batson, Marvin E.Criswell, Ramakrishnan, and Methi Wecharatana, “Fracture Toughness of Fiber Reinforced Concrete”, ACI Materials Journal, July-August,pp.339-353 (1991)
43. 鄭富書,林銘郎,“鋼纖維混凝土應用於燧道工程之發展、現況與展望”,纖維混凝土在工程上的應用與發展研討會,台灣營建研究院,1998。
44. 詹穎雯,陳明谷,李修齊,“鋼纖維混凝土之水中磨耗性質”,纖維混凝土發展與應用研討會,台灣營建研究院,1997。
45. 宋佩瑄,“混凝土工程中如何選用適當的纖維材料”,纖維混凝土在工程上的應用與發展研討會,台灣營建研究院,1998。