研究生: |
黃彥霖 Yen-lin Huang |
---|---|
論文名稱: |
應用以IEC 61850為基礎之IED於智慧型電網之保護 Apply IEC 61850 base IED to Smart Grid Protection |
指導教授: |
辜志承
Jyh-cherng Gu |
口試委員: |
陳在相
Tsai-hsiang Chen 蔡孟伸 Men-shen Tsai 楊金石 Jin-shyr Yang 蕭弘清 Horng-ching Hsiao |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電機工程系 Department of Electrical Engineering |
論文出版年: | 2011 |
畢業學年度: | 99 |
語文別: | 中文 |
論文頁數: | 187 |
中文關鍵詞: | 智慧型電網 、智慧型電子裝置 、IEC 61850 |
外文關鍵詞: | smart grid, Intelligent electronic device, IEC 61850 |
相關次數: | 點閱:656 下載:4 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本論文主旨為研究以IEC 61850通訊協定標準IED應用於智慧型電網保護系統,未來智慧型電網結構相當複雜,如何建置其通訊系統與保護策略也面臨極大挑戰,本論文調查國際間智慧型電網架構與通訊協定之應用與發展現況,並介紹IEC 61850通訊協定如何成為智慧型電網的核心資訊技術標準之一,研究如何以IEC 61850標準即時智慧化雙向資訊通訊基礎之保護策略,建立具自我修復能力之先進智慧型電網保護系統,為了驗證IEC 61850 標準系統之通訊效能,根據IEC 61850標準規範,並參考國際間工程試驗實績之研究報告,分析需求條件與建構步驟,建立IEC 61850標準之智慧型電網範例系統之通訊測試與分析平台,首先應用IED規劃軟體於不同廠家IED間GOOSE水平通訊測試,研究各廠家IED規劃程序、時間同步校正與GOOSE效能測試之方法與步驟,接著應用E3 Studio監控軟體於IED垂直資訊整合通訊測試,研究E3 Studio軟體蒐集IED資料與設計監控人機界面,包含範例系統單線圖、IED監視介面、故障警報與事件紀錄,最後分析測試結果與問題探討,藉此測試經驗與驗證程序可望作為我國未來發展智慧型電網之參考。
This thesis focus on the studying of Intelligent Electronic Devices (IED) with IEC 61850 standard applications for communication and protection system in smart grid. The configuration of smart grid is quite complex, hence it’s an extreme challenge for building the communication systems and designing protection strategies for smart grid. First, this thesis investigates present application and future development of international architecture and communication protocols in smart grid. Then, the IEC 61850 protocol which is one of the information technology standards in smart grid is well discussed. Moreover, this thesis introduced methods to apply two-way, real-time intelligent information and communication based protection strategy for IEC 61850 standard. Establishing a self-healing protection system of smart grid also mentioned in this study. This thesis refers to the reports of performance test of international research engineering for analyzing the demand conditions and construction steps. Furthermore, this study establish an experiment and analysis platform for an example system of smart grid based on IEC 61850. First this experiment application of different manufacturers configuration software to test horizontal communication between the multi-vendor IEDs. It’s include research configuration process, time synchronization calibration, GOOSE performance testing methods and steps for the multi-vendor IED, Second, this work application E3 Studio SCADA software in the IED vertical communication test integration of information. Mainly research E3 Studio software is designed to acquisition data and control from IED. It’s contain single line diagram, IED HMI, fault alarm and event records, Finally, This thesis also analyzed test results and problems. Hopefully, this experiment example experience and validation process could make a significant basis for future development of smart grid in Taiwan.
[1] S. Rohjans, M. Uslar, R. Bleiker, J. González, M. Specht, T. Suding, and T. Weidelt, “Survey of Smart Grid Standardization Studies and Recommendations,” Smart Grid Communications(SmartGridComm), 2010 First IEEE International Conference on, 4-6 Oct. 2010, pp.583-588.
[2] M. Uslar, S. Rohjans, R. Bleiker, J. Gonzalez, J. lez, M. Specht, T. Suding, and T. Weidelt, “Survey of Smart Grid Standardization Studies and Recommendations-Part 2,” Innovative Smart Grid Technologies Conference Europe (ISGT Europe), 2010 IEEE PES, 11-13 Oct. 2010, pp.1-6.
[3] SMB Smart Grid Strategic Group (SG3), “IEC Smart Grid Standardization Roadmap,” June 2010, Edition 1.0.
[4] D. Herman, “Investigation of the Technical and Economic Feasibility of Micro-Grid- Based Power Systems,” 2001 Electric Power Research Institute, Dec. 2001, pp. 2-1,2-2.
[5] H. Laaksonen, “Protection Principles for Future Microgrids,” Power Electronics, IEEE Transactions on, Dec. 2010, pp.1-9.
[6] 王金墩、張志聲,「監控系統(設備)通訊協定驗證實驗室之建立」完成報告,台灣電力股份有限公司綜合研究所,2007年12月,第2-5~2-21頁,第3-9~3-11頁,第3-47~3-58頁。
[7] S. Mohagheghi, J. Stoupis, and Z. Wang, “Communication Protocols and Networks for Power Systems Current Status and Future Trends,” ABB Inc., US Corporate Research Center, Raleigh, NC, 2009, pp. 1-9.
[8] K. Kaneda, S. Tamura, N. Fujiyama, Y. Arata, and H. Ito, “IEC 61850 based Substation Automation System,” in Proceeding 2008 IEEE Conference on Power Engineering, October 2008, pp. 1-8.
[9] IEC 61850-Communication networks and systems for power utility automation, By Karlheinz Schwarz update, 2010, 02, 01, http:// blog. IEC 61850.com/
[10] T. Sidhu, and Pradeep K Gangadharan, “Control and Automation of Power System Substation using IEC 61850 Communication,” in Proceedings 2005 IEEE Conference on Control Applications, August 28-31, 2005, pp.1-6.
[11] 林震邦,「IEC 61850 通訊協定應用於變電所自動化技術」完成報告,台灣電力公司台中供電區營運處,2008年10月15日,第9~31頁。
[12] S. Mohagheghi, M. Mousavi, J. Stoupis, and Z. Wang, “Modeling Distribution Automation System Components Using IEC 61850,” ABB Inc., US Corporate Research Center, Raleigh, 2009, pp.1-6.
[13] Lars Andersson, Christoph Brunner, and Fred Engler, “Substation Automation based on IEC 61850 with New Process-close Technologies,” ABB Switzerland Ltd, Brown Boveri Strasse 5, CH-8050 Zurich, Switzerland, 2003, pp.1-6.
[14] IEC 61850-1, Communication Networks and Systems in Substations Part 1: Introduction and Overview.
[15] IEC 61850-2, Communication Networks and Systems in Substations Part 2: Glossary.
[16] IEC 61850-3, Communication Networks and Systems in Substations Part 3: General Requirements.
[17] IEC 61850-4, Communication Networks and Systems in Substations Part 4: System and Project Management.
[18] IEC 61850-5, Communication Networks and Systems in Substations Part 5: Communication Requirements for Functions and Devices Models.
[19] IEC 61850-6, Communication Networks and Systems in Substations Part 6: Configuration Description Language for Communication in Electrical Substations Related to IEDs.
[20] IEC 61850-7-1, Communication Networks and Systems in Substations Part 7-1: Basic Communication Structure for Substation and Feeder Equipment Principles and Models.
[21] IEC 61850-7-2, Communication Networks and Systems in Substations Part 7-2: Basic Communication Structure for Substation and Feeder Equipment Abstract Communication Service Interface(ACSI).
[22] IEC 61850-7-3, Communication Networks and Systems in Substations Part 7-3: Basic Communication Structure for Substation and Feeder Equipment Common Data Classes.
[23] IEC 61850-7-4, Communication Networks and Systems in Substations Part 7-4: Basic Communication Structure for Substation and Feeder Equipment Compatible Logical Node Classes and Data Classes.
[24] IEC 61850-8-1, Communication Networks and Systems in Substations Part 8-1: Specific Communication Service Mapping (SCSM) Mappings to MMS (ISO/IEC 9506-1 and ISO/IEC 9506-2) and to ISO/IEC 8802-3.
[25] IEC 61850-9-1, Communication Networks and Systems in Substations Part 9-1: Specific Communication Service Mapping(SCSM) Sampled Values over Serial Unidirectional Multidrop Point to Point Link.
[26] IEC 61850-9-2, Communication Networks and Systems in Substations Part 9-2: Specific Communication Service Mapping(SCSM) Sampled Values over ISO/IEC 8802-3.
[27] Karlheinz Schwarz, “Comparison of IEC 60870-5-101/-103/-104, DNP3, and IEC 60870-6-TASE.2 with IEC 61850,” Schwarz Consulting Company, 02 Feb. 2002, pp.1-20.
[28] R.E. Mackiewicz, “Overview of IEC 61850 and Benefits,” in Proceeding 2005/2006 IEEE PES Transmission and Distribution Conference and Exhibition, 2006, pp.376-383.
[29] R. Lopez, A. Moore, and J. Gillerman, “A Model-Driven Approach to Smart Substation Automation and Integration for Commission Federal de Electricidad,” in Proceeding 2010 IEEE/PES Transmission and Distribution Conference and Exhibition, 2010, pp.1-8.
[30] V. Skendzic, and R. Moore, “Extending the Substation LAN Beyond Substation Boundaries: Current Capabilities and Potential New Protection Applications of Wide-Area Ethernet,” Schweitzer Engineering Laboratories, Inc., Roger Moore, RuggedCom, Inc. , 2006 , pp. 641-649.
[31] A. P. Apostolov, “Implementation of accelerated transmission line protection schemes in substations with IEC 61850”, Transmission and Distribution Conference and Exposition, April 2008, pp.1-6.
[32] Hyung-Kyu Kim, Sang-Hee Kang, Soon-Ryul Nam, and Sea-Seung Oh, “Improved Operating Scheme Using an IEC61850-based Distance Relay for Transformer Backup Protection,” PowerTech, 2009 IEEE Bucharest, Oct. 2009, pp.1-6.
[33] M. L. Reichard, D. Finney, and J. T. Garrity, “Windfarm System Protection Using Peer-to-Peer Communications,” Protective Relay Engineers, 2007 60th Annual Conference for, 27-29 March 2007, pp.511-521.
[34] A. P. Apostolov, “Modeling Systems with Distributed Generators in IEC 61850,” Power Systems Conference, 2009. PSC'09. , 10-13 March 2009, pp.1-6.
[35] H. Frank, S. Mesentean, and F. Kupzog, “Simplified Application of the IEC 61850 for Distributed Energy Resources,” Computational Intelligence, Communication Systems and Networks, 2009. CICSYN'09. First International Conference on, 23-25 July 2009, pp.172-177.
[36] http://www.energy.siemens.com/entry/energy/hq/en/
[37] http://www.abb.com/
[38] http://www.vamp.fi/Default.aspx
[39] http://store.gedigitalenergy.com/front.asp
[40] http://www.selinc.com/default.aspx
[41] http://www.areva-td.com/
[42] Clemens Hoga, and Paul Skare, “IEC 61850 Projects in Germany and Switzerland Power Transmission & Distribution,” 2006 Siemens Power Transmissions & Distribution, 06 April 2006, pp. 1-19.
[43] S. Laederach, W. Baass, K.P. Brand, and P. Reinhardt, “ Experience with IEC 61850 in the refurbishment of an Important European 380 KV Substation,” CIGRE Session 2006, Paper B5-109.
[44] Energias de Portugal chooses ABB's IEC 61850 SA solutions, Powered by ABB Library Copyright 2011 ABB. All rights reserved. http://www.abb.com.cn/
[45] J. Holbach, J. Rodriguez, C. Wester, D. Baigent, L. Frisk, S. Kunsman, and L. Hossenlopp, “Status on the first IEC 61850 based Protection and Control, Multi-Vendor Project in the United States,” in Proceeding 2007 IEEE Power Systems Conference on Advanced Metering, Protection, Control, Communication, and Distributed Resources, 2007, pp.24.
[46] Nguyen-Dinh Nhat, Gwan-Su Kim, and Hong-Hee Lee, “A Study on GOOSE Communication based on IEC 61850 using MMS Ease Lite,” in Proceeding 2007 International Conference on Control, Automation and Systems, Oct. 17-20, 2007, pp.1-5.
[47] A. P. Apostolov, “Implementation of Accelerated Transmission Line Protection Schemes in Substations with IEC 61850,” in Proceeding 2008 IEEE/PES Transmission and Distribution Conference and Exhibition, 2008, pp.1-6.
[48] Jian-Cheng Tan, Vince Green, and John Ciufo, “Testing IEC 61850 Based Multi-vendor Substation Automation Systems for Interoperability,” in Proceeding 2009 IEEE/PES Power Systems Conference and Exposition, 2009, pp.1-5.
[49] R. Aguilar, and J. Ariza, “Testing and Configuration of IEC 61850 Multivendor Protection Schemes,” in Proceeding 2010 IEEE/PES Transmission and Distribution Conference and Exhibition, 2010, pp.1-8.
[50] I. Xyngi, and M. Popov, “IEC 61850 overview - where protection meets communication,” in Proceeding 10th IET International Conference on Developments in Power System Protection, 2010, pp.1-5.
[51] C. R. Ozansoy, A. Zayegh, and A. Kalam, “Time Synchronization in a IEC 61850 Based Substation Automation System,” in Proceeding 2008 Australasian Universities Power Engineering Conference, 2008, pp.1-7.
[52] M. PAULINO, and U. CARMO, “Intelligent Electronic Devices Remote Test Architecture Solution Using Test Unit,” CIGRE, Session 2009, Paper 109.
[53] Fred Steinhauser, Thomas Schossig, Andreas Klien, and Stephan Geiger, “Performance Measurements for IEC 61850 IEDs and Systems Fred Steinhauser,” OMICRON electronics.
[54] Configuration of the 61850 interface of VAMP 50/257/259, Version 1.4, Jan. 22, 2009.
[55] VAMP 257 Feeder and Motor Manager, Operation and Configuration Instructions, Technical Description VM257EN004, VAMP.
[56] Feeder Terminal REF 54_ Technical Reference Manual, General, ABB, Aug.07. 2005.
[57] F650 Digital Bay Controller Instruction manual GEK-106310X, Firmware Version: 5.0X, EnerVista F650 Setup Version:5.0X, 2008.
[58] MiCOM P141, P142, P143, P144 & P145 Feeder Management Relay, Software Version 43, Hardware Suffix J, Technical Manual P14x/EN M/De6, AREVA, 2009.
[59] SEL-751A Feeder Protection Relay Instruction Manual, Jan. 29, 2010.