研究生: |
張耘嘉 Yun-Chia Chang |
---|---|
論文名稱: |
塗層三角形孔洞之熱彈性分析 Thermoelasticity Analysis of an Infinite Plate with a Coated Triangular Hole Under a Remote Uniform Heat Flow |
指導教授: |
趙振綱
Ching-Kong Chao |
口試委員: |
黃育熙
Yu-Hsi Huang 陳富謀 Fu-Mou Chen |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2018 |
畢業學年度: | 106 |
語文別: | 中文 |
論文頁數: | 69 |
中文關鍵詞: | 均勻分布熱流 、保角映射法 、解析連續法 、二維平面 、塗層三角形孔洞 |
外文關鍵詞: | uniform heat flow, alternation technique, coated triangular hole |
相關次數: | 點閱:187 下載:1 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本文主要求解受到均勻分布熱流作用於含有塗層三角形孔洞之無窮平板的問題,並計算孔洞邊界正向應力與切向應力。利用保角映射法將塗層三角形孔洞問題轉換成同心圓孔洞問題,由物理平面轉換至數學平面,再藉由解析連續以及交替法等方法,計算所需函數。為了計算塗層三角形孔洞邊界之應力,必須先取得整體溫度場分布,藉由邊界上的溫度連續以及熱流連續等條件,利用交替法反覆疊代求得整體溫度場,再引入應力函數運算。研究中根據Muskhelishvili等向性二維彈性力學基本公式,藉由邊界上的應力連續以及位移連續等條件,同樣利用交替法計算求得應力場,其中利用到輔助函數,用途為簡化計算。已知應力函數後,藉由應力公式計算邊界上正向應力以及切向應力,探討改變材料參數對於應力之影響。
This study presents thermoelasticity problem of a coated triangular hole embedded in an infinite matrix subjected to uniform heat flow. Using the technique of conformal mapping, analytical continuation in conjunction with alternating technique, a convergent series solution is derived in a compact form. The complex functions are solved by satisfying the continuity conditions of heat flow, temperature, displacements and traction forces across the interface between two different materials. Calculating interfacial stresses by using MATLAB. Using COMSOL to check the numerical analysis results. The effect of shear modulus and thermal expansion coefficients on the interfacial stress are discussed. The results show that both interfacial normal stresses and interfacial shear stresses increase with increasing the different of shear modulus and thermal expansion coefficients between the matrix and a coated layer.
[1] Muskhelishvili, N, I., Some Basic Problems of the Mathematical Theory of Elasticity, Noordhoff, Groningen, 1953.
[2] A. L. Florence and J. N. Goodier, Thermal stresses due to disturbance of uniform heat flow by an insulated ovaloid hole, J. Appl. Mech. 27, 635-639, 1960.
[3] W. T. Chen, Plane Thermal Stress at an Insulated Hole Under Uniform Heat Flow in an Orthotropic Medium, ASEM Journal of Applied Physics, vol. 34, pp.133-136, 1967.
[4] E. J. Brown and F. Erdogan, Thermal stresses in bonded materials containing cuts on the interface. International Journal of Engineering Science, vol. 6, Issue 9, Pages 517-529, 1968.
[5] K. S. Rao, M. N. Bapu Rao, T. Ariman, Thermal stresses in plates with circular holes,Nuclear Engineering and Design, vol.15, Pages 97-112, 1971.
[6] H.Sekine, Thermal stress singularities at tips of a crack in a semi-infinite medium under uniform heat flow, Engineering Fracture Mechanics, vol. 7, Issue 4, Pages 713-729, 1974.
[7] H.Sekine, Thermal stresses near tips of an insulated line crack in a semi-infinite medium under uniform heat flow, Engineering Fracture Mechanics, vol. 9,Issue 2, Pages 499-507, 1977.
[8] Mikyoung Lee, Asymptotic Expansions for the Thermal Stresses in Bonded Semi-Infinite Bimaterial Strips, Journal of Electronic Packaging 113(2), 173-177, 1991.
[9] Norio Hasebe, K. Tamai, and T Nakamura, Analysis of kinked crack under uniform heat flow, J. Eng. Mech., ASCE, vol. 112, pp. 31-42, 1986.
[10] Norio Hasebe, Akinori Tomida and Takuji Nakamura, Thermal Stresses of a Cracked Circular Hole due to Uniform Heat Flux, Journal of Thermal Stresses,
11:4, pp. 381-391, 1988.
[11] J. Q. Tarn and Y. M. Wang, Thermal Stresses in Anisotropic Bodies with a Hole or a Rigid Inclusion, J. Thermal Stresses, vol. 16, pp. 455–471, 1993.
[12] I. Lekakis, M. A. Kattis, E. Providas, A. L. Kalamkarov, The disturbance of heat flow and thermal stresses in composites with partially bonded inclusions, Composites Part B: Engineering, vol. 31, Issue 1, Pages 21-27 pp.21-27, 2000.
[13] S. G. Lekhnitskii, Theory of Elasticity of an Anisotropic Elastic Body, Holden-Day, San Fraccisco, 1963.
[14] C. K. Chao and Lee, J. Y., Interaction Between a Crack and a Circular Elastic Inclusion under Remote uniform Heat Flow, International Journal of Solids and Structures, 33(26), pp. 3865-3880, 1996.
[15] C. K. Chao and Shen, M. H., On Bonded Circular Inclusions in Plane Thermoelasticity, Journal of Applied Mechanics, Transactions of the ASME, 64(4), pp. 1000-1004, 1997.
[16] C. K. Chao, M. H. Shen. And C. K. Fung, On Multiple Circular Inclusions in Plane Thermoelasticity, International Journal of Solids and Structures, 34(15), pp. 1873-1892, 1997.
[17] C. K. Chao and T. Y. Heh, Thermoelastic Interaction between a Hole and an Elastic Circular Inclusion, AIAA Journal. 37(4), pp. 475-481, 1999.
[18] C. K. Chao, F. M. Chen and M.H. Shen, An Exact Solution for Thermal Stresses in a Three-Phase Composite Cylinder under Uniform Heat Flow, International Journal of Solids and Structures, vol. 44, Issues 3–4, Pages 926-940, 2007.
[19] F. H. Chen and C. K Chao, Stress Analysis of an Infinite Plate with a Coated Elliptic Hole under a Remote Uniform Heat Flow, Journal of Thermal Stresses, Journal of Thermal Stresses, vol. 29, pp. 599-613, 2008.
[20] C. K. Chao, C. K. Chen, F. M. Chen, Interfacial Stresses Induced by a Point Heat Source in an Isotropic Plate with a Reinforced Elliptical Hole, Computer Modeling in Engineering and Sciences, vol. 63, pp1-28, 2010.
[21] Ming Dai, Huiyu Sun, Thermo-elastic analysis of a finite plate containing multiple elliptical inclusions, International Journal of Mechanical Sciences, vol. 75, Pages 337-344, 2013.
[22] S. H. Yang, On two circular inclusions in plane elasticity with a point heat source, Master's Thesis, NTUST, 2015.