研究生: |
鄧銘宗 Ming-tsung Deng |
---|---|
論文名稱: |
U彎形板金沖模設計之Pro/Toolkit程式設計 Use of Pro/Toolkit to Design Punch and Die for U-bending Sheet Metal |
指導教授: |
林清安
Alan C. Lin |
口試委員: |
修芳仲
none 謝文賓 W.-B. Shieh |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2005 |
畢業學年度: | 93 |
語文別: | 中文 |
論文頁數: | 103 |
中文關鍵詞: | 沖模系統 、彎形板金 |
外文關鍵詞: | 3D CAD, Pro/Toolkit |
相關次數: | 點閱:231 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本論文旨在設計一套適用於U彎形板金件的3D CAD系統,其基本運作是以3D板金件成品為基本資料,並藉由板金件之3D幾何資料,再利用本研究所提出之切割法使系統自動產生沖頭,此外,模具設計完成後,可利用零件同動的觀念,使零件做相對運動,達到製程模擬的效果。
在實驗例證中,本論文使用Pro/Toolkit以及Visual C++之MFC為核心程式,開發一套Pro/ENGINEER®視窗下的操作軟體,透過簡易的視窗操作介面,使用者可輕易地修改U彎形板金件之幾何尺寸,並藉由系統載入之板金件搭配切割法之應用自動產生彎形沖頭,接著沖頭將自動組立於下模建構出完整的U彎形板金沖模系統,系統中亦加入沖壓製程模擬以及整體彎曲沖模之干涉檢測功能,藉以瞭解試模的狀況及板金成形的過程,並確保所設計之彎曲沖模的正確性。
This research aims to develop a 3D CAD system for mold design of u-bending sheet metal. 3D sheet metals are used as input and their dimensions are specified in a parametric manner. Based on the 3D geometry, a divide-and-merge approach is proposed to automate the generation of punches. Animation of mold opening is also taken into account.
As for system implementation, this thesis uses Pro/Toolkit and MFC of Visual C++ as the kernels to develop a Pro/ENGINEER-based prototype system. The system provides several user-friendly dialog boxes so that the user can easily modify the dimensions of a u-bending sheet metal. Programming codes are developed to implement the proposed divide-and-merge approach which accepts Pro/E sheet-metal parts as input and automatically generate three punches to produce the u-bending part. The punches are then assembled automatically with mold plates to construct a complete molding mechanism for u-bending sheet metal. The animation of punch motions during mold opening is also implemented so as to ensure free-of-collision during the opening process.
1. 戴宜傑,沖壓加工與沖模設計,新陸書局,台北,1995。
2. 帝漢實業股份有限公司,連續沖模智慧型模具設計軟體DCP2操作手冊,帝漢實業股份有
限公司,台北,2000。
3. Autodesk Inc., AutoCAD Development System Programmer’s Reference Manual,
Autodesk Inc. Publications, CA, Jun 1993.
4. Autodesk Inc. AutoCAD Customization Manual, Autodesk Inc. . Publications,
CA, Jun 1993.
5. 郭漢斌,「連續沖模之2D參數化設計」,國立台灣科技大學工業技術研究所碩士論文,
台北,2000。
6. Parametric Technology Corporation. Pro/ENGINEER® Wildfire 2.0 Pro/Toolkit
User's Guide, PTC, USA, 2003.
7. 李世國,Pro/Toolkit程序設計,機械工業出版社,北京,2003。
8. 張繼春,Pro/ENGINEER®二次開發實用教程,北京大學出版社,北京,2003。
9. 施啟田,「連續沖模之3D電腦輔助干涉檢測與製程動態模擬」,國立台灣科技大學工程
研究所碩士論文,台北,2003。
10.位元文化編著,Visual C++之C++、物件導向到視窗程式設計,文魁資訊股份有限公
司,台南,1998。