研究生: |
楊浩銘 How-ming Young |
---|---|
論文名稱: |
4GHz微波放大器佈局之研製 Design and Implementation of 4GHz Microwave Amplifier Layout |
指導教授: |
王秀仁
Show-Ran Wang |
口試委員: |
徐敬文
Ching-Wen Hsue 瞿大雄 Tah-Hsiung Chu 王秀仁 Show-Ran Wang |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電子工程系 Department of Electronic and Computer Engineering |
論文出版年: | 2005 |
畢業學年度: | 93 |
語文別: | 中文 |
論文頁數: | 54 |
中文關鍵詞: | Layout 、高頻 、放大器 、微波 |
外文關鍵詞: | Microwave, Amplifier, Layout |
相關次數: | 點閱:474 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
在這篇論文中,個人設計了三個中心頻率在4G微波放大器。電晶體選擇的是Philips所製造的BFG425W。模擬軟體採用的是MWO2003。佈局軟體是採用Portel。這篇論文嘗試建立一個簡單的設計步驟和讓模擬與實際量測數據相符合。
微波放大器之佈局方式有很多,藉由不同的佈局方式,從中比較、分析微波放大器的變化,(此三組微波放大器規格相同)。提供不同的佈局之方法,製作出不同之微波放大器,並實驗觀察結果。
In this thesis, I have designed three 4GHz microwave amplifier. The transistor that I used is BFG 425W produced by Philips. The simulation software is Microwave Office. The layout software is Portel. This thesis try to build a simple procedure, and fit the simulation to the experimental results.
There are many methods to layout a microwave amplifier,we can analizes the changes depends on different layout methods.Try different layout methods to make different microwave amplifiers,
Do some analysis.Observe its dirrenent results.
參考文獻
[1]David M. Pozar,”Microwave Engineering second edition”John Wiley&Sons,Inc.1998.
[2]Guillermo Gonzalez,” Microwave transistor amplifiers : analysis and design” Prentice-Hall, c1984
[3] George L. Matthaei, Leo Young, E. M. T. Jones.,” Microwave filters, impedence-matching network, and coupling structures” McGraw-Hill ,1964.
[4] J. A. G. Malherbe.,” Microwave transmission line filters” Artech House,c1979.
[5] Jia-Sheng G. Hong,M. J. Lancaster.,”Microstrip Filters for RF/microwave applications ” Wiley c2001.
[6] Cohn, S.B.,” Parallel-Coupled Transmission-Line-Resonator Filters”Microwave Theory and Techniques, IEEE Transactions on , Volume: 6 , Issue: 2 , Apr 1958 Pages:223 – 231
[7] Sorrentino, R.; Roselli, L.,“A new simple and accurate formula for microstrip radial stub” Microwave and Guided Wave Letters, IEEE [see also IEEE Microwave and Wireless Components Letters] , Volume: 2 , Issue: 12 , Dec. 1992 Pages:480 – 482
[8] Giannini, F.; Ruggieri, M.; Vrba, J. “Shunt-Connected Microstrip Radial Stubs (Short Paper)”Microwave Theory and Techniques, IEEE Transactions on , Volume: 34 , Issue: 3 , Mar 1986 Pages:363~366
[9]Atwater, H.A. “The Design of the Radial Line Stub: A Useful Microstrip Circuit Element” Microwave Journal Volume 28, 1985 Pages:149~153
[10] Atwater, H.A. “Mlcrostrip Reactive Circuit Elements” Microwave Theory and Techniques, IEEE Transactions on , Volume: 83 , Issue: 6 , Jun 1983 Pages:488 – 491
[11] Giannini, F.; Sorrentino, R.; Vrba, J.“Planar Circuit Analysis of Microstrip Radial Stub” Microwave Symposium Digest, MTT-S International , Volume: 84 , Issue: 1 , May 1984
Pages:124 – 125
[12]Syrett, B.A.” A Broad-Band Element for Microstrip Bias or Tuning Circuits (Short Papers)” Microwave Theory and Techniques, IEEE Transactions on , Volume: 28 , Issue: 8 , Aug 1980 Pages:925~927
[13] Chu, A.; Courtney, W.E.; Mahoney, L.J.; McClelland, R.W.; Atwater, H.A.;”GaAs Monolithic Frequency Doublers with Series Connected Varactor Diodes”Microwave Symposium Digest, MTT-S International , Volume: 84 , Issue: 1 , May 1984 Pages:51 – 54
[14] Chu, A.; Courtney, W.E.; Mahoney, L.J.; Manfra, M.J.; Calawa, A.R.; ”Dual Function Mixer Circuit for Millimeter Wave Transceiver Applications”Microwave Symposium Digest, MTT-S International , Volume: 85 , Issue: 1 , Jun 1985 Pages:120 - 123