研究生: |
謝豐帆 FENG-FAN HSIGH |
---|---|
論文名稱: |
鐵芯外觀自動光學檢測系統之研製 Development of The Automated Optical Inspection System of Magnetic Core Using Image Processing Technology |
指導教授: |
唐永新
Yeong-Shin Tarng |
口試委員: |
洪西進
Shi-Jinn Horng 鍾國亮 Kuo-Liang Chung |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2005 |
畢業學年度: | 93 |
語文別: | 中文 |
論文頁數: | 130 |
中文關鍵詞: | 鐵芯 、自動光學檢測 |
外文關鍵詞: | Core, automated optical inspection |
相關次數: | 點閱:289 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本計劃旨在研發一鐵芯外觀自動光學檢測系統,以提供鐵芯塗銀外觀缺陷檢測。系統內包括整列送料模組、銀漆移印機構模組、夾治具機構模組、機器視覺模組與電控模組,藉由視覺取像與影像處理技術,可以檢測分析出塗抹銀漆分佈面積是否在要求內。
在檢測功能中具有彈性的影像分析參數設定,能夠決定鐵芯塗銀外觀缺陷標準,減少檢驗時間與有效地降低成本,使得量測之結果最佳化。
The purpose of this thesis is to develop an automated optical inspection of magnetic core. It can provide an external appearance inspection for smearing silver on a core. The system is composed of several modules including core supplying module, smearing silver machine module, clamping apparatus module, machine vision module and control unit. The silver areas of cores can be analyzed and detected by using image acquiring and image processing technology.
The functions of the inspection have a flexible setting of image analysis to obtain the suitable parameters for determining the external defects of cores. Shorter inspecting time, more reliable operation and better performance are achieved through using this automatic inspecting analyzer.
[1]廖志偉,光學粒徑分析系統之研製,台灣科技大學碩士論文,民國九十二年。
[2]王明德,「機器視覺 目光銳利」,機電整合雜誌,第七十九期,民國九十四年三月。
[3]葉昭蘭,「機械視覺技術之回顧與展望」,機械工業雜誌,第160~185頁,民國八十九年。
[4]鍾國亮,影像處理與電腦視覺,第3~4頁,東華書局,民國九十一年六月。
[5]王瑞陽,「機器視覺系統的光源與照明」,機械工業雜誌,第185~200頁,民國七十七年。
[6]Nello Zuech, Applying Machine Vision, A Wiley-Interscience Publication, New York,pp.45-66(1988).
[7]Keith Bancroft,吳佳鎮譯,鏡頭淺談,第20~70頁,台北,眾文圖書公司,民國七十四年。
[8]汪光夏,「機器視覺運用」,電路版會刊,第二期,第8~23頁,民國八十九年。
[9]蔡明忠,自動化感測與控制教材,第9-7頁,國立台灣科技大學工程技術研究所,民國九十二年。
[10]National Instruments Corporation, IMAQ PCI/PXI–1407 User Manual, 2000.
[11]吳成柯、戴善榮、程湘君,雲立貴譯,數位影像處理,儒林書局,民國八十五年。
[12]楊武智,影像處理與辨認,全華科技圖書股份有限公司,民國八十三年。
[13]Ramesh Jain, Rangachar Kasturi, Brian G. Schunck, MACHINE VISION,MaGRAW-Hill International Editions,pp.140-141(1995).
[14]National Instruments Corporation,“IMAQ Vision Concepts Manual”,2000年.
[15]National Instruments Corporation,“IMAQ Vision Builder Tutorial”,2000年.
[16]K. Ohtani, ”A Fast Edge Location Measurement With Subpixel Accuracy Using A CCD Image,”IEEE Instrumentation and Measurement,(2001).
[17]廖文輝,周至宏編,洪英榮校閱,圖形監控,全華科技圖書,民國八十七年。
[18]蔡明忠,自動化感測與控制教材,第8-31~8-32頁,國立台灣科技大學工程技術研究所,民國九十二年。
[19]雙象貿易股份有限公司編譯,三菱可程式控制器FX2N中文使用手冊,雙象貿易股份有限公司,民國九十一年。
[20]台灣歐姆龍股份有限公司編譯,電子凸輪H8PS中文使用手冊,台灣歐姆龍股份有限公司,民國九十三年。
[21]Nello Zuech, Apply Machine Vision, A Wiley-Interscience Publication, New York,pp198-199(1988).
[22]台灣東方馬達股份有限公司編譯,超低速同步馬達使用手冊,台灣東方馬達股份有限公司,民國九十四年。
[23]台灣三菱電機股份有限公司編譯,伺服馬達中文使用手冊,台灣三菱電機股份有限公司,民國九十二年。