研究生: |
林元富 Yuan-fu Lin |
---|---|
論文名稱: |
PCB之限制區規劃與板料合併 Planning of PCB Restricted Area and Board Combination |
指導教授: |
林清安
Alan C. Lin |
口試委員: |
鄭逸琳
Yih-Lin Cheng 賴景義 Jiing-Yih Lai |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2009 |
畢業學年度: | 97 |
語文別: | 中文 |
論文頁數: | 80 |
中文關鍵詞: | PCB零件配置 、限制區 、板料合併 、IDF 、3D CAD 、Pro/ENGINEER 、Pro/Toolkit |
外文關鍵詞: | PCB layout, Restricted area, Board combination, IDF, 3D CAD, Pro/ENGINEER, Pro/Toolkit |
相關次數: | 點閱:208 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本論文主要是在Pro/ENGINEER之下發展印刷電路板(Printed circuit board, PCB)機構元件配置資料自動化輸出的功能,主要的研究事項如下:
(1) 自動建立限制區:將所有機構元件的幾何外型與高度作為參數資料加以記錄,當一個機構元件被選取,並被組裝至PCB時,即可依對應的參數達到自動建立限制區的功能。
(2) 併板規劃:經由設計者選取定位座標系,即可將多塊PCB利用座標轉換的原理合併為一塊,並將PCB的規劃資訊轉換為IDF (Intermediate Data Format) 格式的檔案。
針對上述的研究事項,本論文除了提出解決方法外,並使用Pro/Toolkit為軟體開發工具,進行程式開發,並實際應用於PC網路卡的產品開發。
This thesis aims to develop a function under Pro/ENGINEER to automate the export of layout of mechanical components in a printed circuit board (PCB). Primary tasks include:
(1) Automatic creation of restricted area: the outline and height of mechanical components are recorded as the parameter data. When a mechanical component is selected and assembled onto a PCB, the restricted area of the component can be automatically established according to its corresponding parameters.
(2) Combination of printed circuit boards: a positioning coordinate is selected by the designer, and then several printed circuit boards be combined into one board based on the principle of coordinate transformation. Furthermore, a method is proposed in the thesis to generate the layout information of the combined PC board in the form of Intermediate Data Format (IDF) file.
In addition to proposing the methodology for the above research issues, this thesis uses Pro/Toolkit as the application programming tool to develop a software package, which is then used in practical development of a PC network card.
1. 郭漢斌,「連續沖模之2D參數化設計」,國立臺灣科技大學機械工程研究所碩士論文,台北,2000。
2. 戴偉翰,「彎形板金展開之3D CAD系統開發」,國立臺灣科技大學機械工程研究所碩士論文,台北,2003。
3. 莊博文,「連續沖模之3D電腦輔助沖程佈置」,國立臺灣科技大學機械工程研究所碩士論文,台北,2003。
4. 劉國彬,「連續沖模之3D電腦輔助板料與沖程佈置」,國立臺灣科技大學機械工程系碩士論文,台北,2004。
5. 蕭曉薇,「連續沖模之3D電腦輔助模座設計」,國立臺灣科技大學機械工程研究所碩士論文,台北,2003。
6. 陳志文,「連續沖模之模座設計與動態模擬之Pro/TOOLKIT程式開發」,國立臺灣科技大學機械工程研究所碩士論文,台北,2005。
7. 邱贊源,「連續沖模板料設計之Pro/TOOLKIT程式設計開發」,國立臺灣科技大學機械工程研究所碩士論文,台北,2006。
8. 宋祥瑀,「連續沖模板料沖程佈置之Pro/Toolkit」,國立臺灣科技大學機械工程系碩士論文,台北,2007。
9. 王俊程,「鑄造模具2D參數化設計系統之開發」,國立臺灣工業技術學院機械工程技術研究所碩士論文,台北,1996。
10. 徐志明,「2D及3D鑄造模具參數化設計」,國立臺灣工業技術學院工程技術研究所自動化及控制學程碩士論文,台北,1997。
11. 林清安,Pro/ENGINEER Wildfire 3.0零件設計進階(下),旗標出版股份有限公司,台北市,2006。