簡易檢索 / 詳目顯示
| 研究生： |
謝子楡 Tzu-Yu Hsieh |
|---|---|
| 論文名稱： |
頁寬式半導體雷射高速積層製造系統機構設計與製作暨ABS製造應用 Design and Construction of Mechanism for Pagewide Diode Laser High Speed Additive Manufacturing and ABS Fabrication Application |
| 指導教授： |
鄭正元
Jeng-Ywan Jeng 謝志華 Chih-hua Hsieh |
| 口試委員: |
林上智
Shang-Chih Lin 謝志華 Chih-hua Hsieh 邱耀弘 Yue-Hong Qiu |
| 學位類別： |
碩士 Master |
| 系所名稱： |
工程學院 - 機械工程系 Department of Mechanical Engineering |
| 論文出版年： | 2021 |
| 畢業學年度： | 109 |
| 語文別： | 中文 |
| 論文頁數： | 114 |
| 中文關鍵詞： | 高速 3D 列印 、多雷射模組 、機構設計 、丙烯腈-丁二烯-苯乙烯樹脂 |
| 外文關鍵詞： | High speed 3D printing, Multi-module laser array, design of the mechanism, ABS resin |
| 相關次數： | 點閱：244 下載：0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
[1] A.Nazir, J.-Y.Jeng, A high-speed additive manufacturing approach for achieving high printing speed and accuracy, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 234 (2020) 2741–2749. https://doi.org/10.1177/0954406219861664.
[2] 鄭正元, 江卓培, 林宗翰, 林榮信, 蘇威年, 汪家昌, 蔡明忠, 賴維祥, 鄭逸琳洪基彬, 3D列印：積層製造技術與應用, 初版, 全華圖書, 2017.
[3] I.Gibson, D.Rosen, B.Stucker, Additive Manufacturing Technologies, Springer New York, New York, NY, 2015. https://doi.org/10.1007/978-1-4939-2113-3.
[4] R.Goodridge, S.Ziegelmeier, Powder bed fusion of polymers, in: Laser Addit. Manuf. Mater. Des. Technol. Appl., Elsevier Inc., 2017: pp. 181–204. https://doi.org/10.1016/B978-0-08-100433-3.00007-5.
[5] A.E.Tontowi, T.H.C.Childs, Density prediction of crystalline polymer sintered parts at various powder bed temperatures, Rapid Prototyp. J. 7 (2001) 180–184. https://doi.org/10.1108/13552540110395637.
[6] R.Velu, S.Singamneni, Evaluation of the influences of process parameters while selective laser sintering PMMA powders, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 229 (2015) 603–613. https://doi.org/10.1177/0954406214538012.
[7] M.Schmid, A.Amado, K.Wegener, Polymer powders for selective laser sintering (SLS), AIP Conf. Proc. 1664 (2015). https://doi.org/10.1063/1.4918516.
[8] N.Hopkinson, P.Erasenthiran, High Speed Sintering–Early Research into a New Rapid Manufacturing Process, Solid Free. Fabr. Symp. Proc. (2004) 312–320. https://repositories.lib.utexas.edu/handle/2152/79973.
[9] H.R.Thomas, N.Hopkinson, P.Erasenthiran, High speed sintering - Continuing research into a new rapid manufacturing process, Int. Solid Free. Fabr. Symp. (2006) 682–691.
[10] J.Nussbaum, N.B.Crane, Evaluation of processing variables in polymer projection sintering, Rapid Prototyp. J. 24 (2018) 880–885. https://doi.org/10.1108/RPJ-04-2017-0070.
[11] Hewlett-Packard, HP Multi Jet Fusion technology white paper, 2018.
[12] A.Alomarah, D.Ruan, S.Masood, Z.Gao, Compressive properties of a novel additively manufactured 3D auxetic structure, Smart Mater. Struct. 28 (2019) 085019. https://doi.org/10.1088/1361-665X/ab0dd6.
[13] EOS LaserProFusion for Tool-Free Injection Molding | EOS, (2021). https://www.eos.info/en/innovations/3d-printing-of-the-future/laserpro-fusion (accessed March8, 2021).
[14] 奚国元,黄科铭,黄启峰韩永隆, 页宽喷印的快速成型装置, CN104441638B, 2013.
[15] 李侯慶, 多雷射模組3D列印機台設計開發與製程參數分析, 國立臺灣科技大學, 2020.
[16] J.Lawrence, J.Pou, D.K.Y.Low, E.Toyserkani, Advances in laser materials processing: Technology, research and application, 2010. https://doi.org/10.1533/9781845699819.
[17] M.I.Skolnik, RADAR HANDBOOK, McGraw-Hill Education, 2008. https://www.accessengineeringlibrary.com/content/book/9780071485470 (accessed March9, 2021).
[18] N.Surantha, W.R.Wicaksono, Design of Smart Home Security System using Object Recognition and PIR Sensor, Procedia Comput. Sci. 135 (2018) 465–472. https://doi.org/10.1016/j.procs.2018.08.198.
[19] J.Yun, S.-S.Lee, Human Movement Detection and Identification Using Pyroelectric Infrared Sensors, Sensors. 14 (2014) 8057–8081. https://doi.org/10.3390/s140508057.
[20] ASUKA, Radar Micro-Motion Sensing Module RB-60Lite eDM, (2021).
[21] C.M.Marion Henneberger, 雷達天線罩的基本結構, InnoSenT. (2020). https://www.digikey.tw/zh/articles/basics-for-the-construction-of-a-radome.
[22] C.Andrews, R.Hasse, L.Boskovic, N.Jastram, D.Filipovic, On the use of radome materials for a high-power, wideband, millimeter wave antenna, in: 2017 IEEE Int. Symp. Antennas Propag. Usn. Natl. Radio Sci. Meet., IEEE, 2017: pp. 1215–1216. https://doi.org/10.1109/APUSNCURSINRSM.2017.8072650.
[23] RADOME (Radar Enclosure), n.d. www.rfbeam.ch (accessed June20, 2021).
[24] I.Gibson, D.Rosen, B.Stucker, Powder Bed Fusion Processes, in: Addit. Manuf. Technol., Springer New York, 2015: pp. 107–145. https://doi.org/10.1007/978-1-4939-2113-3_5.
[25] ASUKA, 60GHz Radar Radome Design Guide, (2017).
[26] DSC 8000 Performance Check, 2016.
[27] OPTRIS, OPTRIS PI160 固定式高速紅外線熱影像儀, n.d.
[28] 蔡雨萍, 新型具側鏈羧酸系強塑劑的合成與對水泥漿流動性的影響, 國立臺灣師範大學, 2004. https://ndltd.ncl.edu.tw/cgi-bin/gs32/gsweb.cgi/login?o=dnclcdr&s=id=%22092NTNU0065011%22.&searchmode=basic (accessed June15, 2021).
[29] 台灣大學 化學工程學系 粉粒體實驗室, 雷射粒徑分析儀 Laser Diffraction Particle Size Analyzer, 2014.
[30] 老松機械有限公司, 實驗室專用振動篩(LS-300T), n.d.
[31] Sinterit, Sinterit LISA Product specification, n.d.
[32] J.A.Forrest, K.Dalnoki-Veress, J.R.Stevens, J.R.Dutcher, Effect of Free Surfaces on the Glass Transition Temperature of Thin Polymer Films, Phys. Rev. Lett. 77 (1996) 2002–2005. https://doi.org/10.1103/PhysRevLett.77.2002.
[33] M.Zavala-Arredondo, N.Boone, J.Willmott, D.T.D.Childs, P.Ivanov, K.M.Groom, K.Mumtaz, Laser diode area melting for high speed additive manufacturing of metallic components, Mater. Des. 117 (2017) 305–315. https://doi.org/10.1016/j.matdes.2016.12.095.
[34] 王奕軒, 高功率半導體雷射金屬粉末燒結積層製造研究, 國立臺灣科技大學, 2020.
全文公開日期 2026/08/03 (校內網路)全文公開日期 2026/08/03 (校外網路)
全文公開日期 2026/08/03 (國家圖書館：臺灣博碩士論文系統)