研究生: |
鍾宇哲 Yu-Zhe Chung |
---|---|
論文名稱: |
基於圖示的程序化中國特色建築建模系統 An Icon-Based Procedural Approach for Chinese Featured Buildings |
指導教授: |
戴文凱
Wen-Kai Tai |
口試委員: |
鮑興國
Hsing-Kuo Pao 謝東儒 Tung-Ju Hsieh 鄭文皇 Wen-Huang Cheng |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 資訊工程系 Department of Computer Science and Information Engineering |
論文出版年: | 2017 |
畢業學年度: | 105 |
語文別: | 中文 |
論文頁數: | 126 |
中文關鍵詞: | 互動式建模 、中國特色建築 、程序化生成 |
外文關鍵詞: | Interative modeling, Chinese features architecture, Procedural modeling |
相關次數: | 點閱:216 下載:16 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
中國特色建築的構造非常複雜,並不是每個人都了解;這些因素使得在創造中國特色建築的時候是相當費時且不容易的。
基於上述原因,我們將中國特色建築分為Form Factor、Roof、Body與Platform,四個部分建構中國特色建築;並加入樓層系統輔助編輯。我們的方法提供互動式的圖形介面,讓使用者透過拖曳圖示的方式去做變化,而圖示上簡單的圖案更可以讓使用者直觀的編輯對模型本體產生變化,讓建構中國建築模型變成一件簡單的事情。
實驗結果顯示我們能創造大部分的中國特色建築,我們的系統也在與其他建模系統速度的比較上得到優勢,而且我們建構的模組與現實中的中國特色建築相似。
The structure of Chinese features architecture is very complex. this reason make it very time-consuming and hard in Chinese features architecture modeling.
We partition Chinese features Architecture into four parts, Form factor、Roof、Body and Platform. And we add the floor system help editor. Our approach provides an interactive Icon-Based interface that allows the user to make changes by dragging the icon, icon make the user intuitive editing the model. Our approach make the construction of the Chinese features Architecture model becomes a simple thing.
The experimental results show, our approach can create most of the Chinese features building. Also, our approach is fast than other Chinese features building modeling system, and our approach effectively creates Chinese features building to real ones.
CHAUDHURI, S., KALOGERAKIS, E., GUIBAS, L. & KOLTUN, V. Probabilistic reasoning for assembly-based 3D modeling. ACM Transactions on Graphics (TOG), 2011. ACM, 35.
FAN, L., WANG, R., XU, L., DENG, J. & LIU, L. Modeling by drawing with shadow guidance. Computer Graphics Forum, 2013. Wiley Online Library, 157-166.
HUANG, C.-Y. & TAI, W.-K. 2013a. Ting tools: interactive and procedural modeling of Chinese ting. The Visual Computer, 29, 1303-1318.
HUANG, C. Y. & TAI, W. 2013b. Ting Tools: Interactive and Procedural Modeling of Chinese Ting(2013).
HUANG, Z., FU, H. & LAU, R. W. 2014. Data-driven segmentation and labeling of freehand sketches. ACM Transactions on Graphics (TOG), 33, 175.
KALOGERAKIS, E., CHAUDHURI, S., KOLLER, D. & KOLTUN, V. 2012. A probabilistic model for component-based shape synthesis. ACM Transactions on Graphics (TOG), 31, 55.
SHEN, Y. 2014. A Procedural Approach for Massively Modeling Chinese Featured Architecture.
SHIN, H. & IGARASHI, T. Magic canvas: interactive design of a 3-D scene prototype from freehand sketches. Proceedings of Graphics Interface 2007, 2007. ACM, 63-70.
XU, K., CHEN, K., FU, H., SUN, W.-L. & HU, S.-M. 2013. Sketch2Scene: sketch-based co-retrieval and co-placement of 3D models. ACM Transactions on Graphics (TOG), 32, 123.
ZHAO, C. G. 2000. 不只中國木建築, 三聯書店(香港)有限公司.
ZHENG, Y., FU, H., COHEN‐OR, D., AU, O. K. C. & TAI, C. L. Component‐wise Controllers for Structure‐Preserving Shape Manipulation. Computer Graphics Forum, 2011. Wiley Online Library, 563-572.