研究生: |
林成泰 Cheng-Tai Lin |
---|---|
論文名稱: |
隔離型電流饋入全橋式功率因數修正器 Isolated Current-Fed Full-Bridge Power Factor Corrector |
指導教授: |
羅有綱
Yu-Kang Lo 邱煌仁 Huang-Jen Chiu |
口試委員: |
林景源
none 歐勝源 none |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電子工程系 Department of Electronic and Computer Engineering |
論文出版年: | 2012 |
畢業學年度: | 100 |
語文別: | 中文 |
論文頁數: | 55 |
中文關鍵詞: | 電流饋入 、全橋架構 、隔離型 、重疊時間 、功率因數修正 |
外文關鍵詞: | Current-fed, Full-bridge, Isolated, Overlapping time, Power factor correction. |
相關次數: | 點閱:198 下載:21 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本論文旨在分析單級隔離型電流饋入全橋式功率因數修正器,適於大功率轉換應用。控制策略採用類比IC UC3854BN係用於功率因數修正相當普遍的市售IC,將UC3854BN控制信號擷取出來,輸入複雜可程式邏輯裝置,產生出具有交疊時間的控制信號來完成全橋功率因數修正器。本文實現一種,高效率、高功率因數、電路簡單的高功率轉換器。而詳細的操作原理與設計流程,在本文會有進一步的分析與論述。最後本文於實驗室實現一組1.2kW電路,而實驗結果顯示此電路具有高效能、高功率隔離型功率因數修正能力。
This thesis aims to study a single-stage isolated current-fed full-bridge power factor correction (PFC) converter for high power applications. A commercial PFC control IC UC3854BN is combined with an external Complex Programmable Logic Device (CPLD) circuit to realize the gating signals with overlapping-time design for the studied current-fed full-bridge converter. High efficiency, high power factor and simple circuit topology can be achieved by the proposed high-power converter. The operating principles and design criteria are analyzed and discussed in details. A 1.2kW laboratory prototype was implemented and tested. The experimental results are shown to verify the feasibility of the proposed high-performance high-power isolated PFC converter.
參考文獻
[1] A. I. Pressman, “Switching Power Supply Design,” McGraw-Hill, Inc., 1998.
[2] 洪瑞鴻,「2kW功率因數修正器研製」,國立臺灣科技大學電子工程系研究所碩士論文,民國94年。
[3] 宋自恆、林慶仁,「功率因數修正器之原理與常用元件規格」,新電子科技雜誌217期,民國93年4月。
[4] N. Mohan, T. M. Undeland, and W. P. Robbins, “Power Electronics Converters, Applications and Design,” John Wiley & Sons, 3rd Edition, 2003.
[5] S. Kim and P.N. Enjeti, “A Modular Single-Phase Power Factor Correction Scheme With a Harmonic Filtering Function,” IEEE Transactions on Industrial Electronics, Vol. 50, No. 2, pp.328-335, April. 2003.
[6] 許元豪,「徹底剖析工作於連續導通模式下升壓型PFC 線路中高壓快速恢復二極管所導致的五種功率損耗模式」,電子月刊UPS/SPS資訊電源專輯–PFC技術–電源品質保證,2008年2月。
[7] J. Luo, “New PFC Solution for the Future ICE1PCS01/02,” Infineon Power Seminar, 16th Sep 2004, Singapore.
[8] 張厚升,「功率因數(PFC)校正技術的新型控制技術的優缺點對比」,電源世界,2007 年9 月。
[9] B. P. Divakar, and D. Suanto, “A New Boost Power Factor Pre-Regulator,” IEEE Proc. PEDS’99, vol. 2, pp. 915-920, 1999.
[10] C. Zhou, “Active Boost Power Factor Analysis and Design,” IBM Corporation, April 20, 1989.
[11] M. F. Schlecht, and B. A. Miwa, “Active Power Factor Correction for Switching Power Supplies,” IEEE Transactions on Power Electronics, Vol 1. PE-2, No. 4. October 1987.
[12] 曾軍皓,「高效能功率因數修正器研製」,國立台灣科技大學電子工程系研究所碩士論文,民國95年。
[14] A. I. Pressman, Keith Billings, and Taylor Morey, “SWITCHING POWER SUPPLY DESIGN,” 3rd Edition, 2009.
[15] 梁適安編著,交換式電源供給器之理論與實務設計,全華科技圖書股份有限公司,民國95年。
[16] 梁適安編譯,高頻交換式電源供應器原理與設計,全華科技圖書股份有限公司,民國94年。
[17] V. Yakushev, V. Meleshin and S. Fraidlin, “Full-Bridge Isolated Current-Fed Converter with Active Clamp,” APEC., Vol. 1, pp. 560-566, March 1999.
[18] A. Averberg, K. R. Meyer and A. Mertens, “Current-Fed Full Bridge Converter For Fuel Cell Systems,” IEEE PESC 2008., pp. 866-872, June 2008.
[19] X. Kong, L. T. Choi and A. M. Khambadkone, “Analysis and Control of Isolated Current-Fed Full Bridge Converter in Fuel Cell System,” The 30th Annual Conference of the IEEE Industrial Electronics Society, vol. 3, pp. 2825-2830, November 2004.
[20] X. Kong and A. M. Khambadkone, “Analysis and Implementation of a High Efficiency, Interleaved Current-Fed Full Bridge Converter for Fuel Cell System,” IEEE Transactions on Power Electronics, vol. 22, no. 2, pp. 543-550, March 2007.
[21] N. Mohan, T. M. Undeland and W. P. Robbins, Power Electronics Converters, Applications and Design,” John Wiley & Sons Inc., 3rd Edition, 2003.
[22] 宋自恆、閻松駿,「主動式功率因數修正器之電感設計方式及雜訊對策徹底剖析」,新電子科技雜誌第240 期.2006 年3 月號。
[23] TI Texas Instruments, “Unitrode - UC3854A/B and UC3855A/B Provide Power Limiting With Sinusoidal Input Current for PFC Front Ends” Application Note DN-66.
[24] TI Texas Instruments, “UC3854A and UC3854B Advanced Power Factor Correction Control ICs” Application Note DN-44.
[25] C. P. Basso, “Switch-Mode Power Supplies, SPICE Simulations and Practical Designs,” 1st Edition, 2008.
[26] TI Texas Instruments, “UC3854, POWER FACTOR CORRECTOR,” Data Sheet, 2003.
[27] M. F. Schlecht, and B. A. Miwa, “Active Power Factor Correction for Switching Power Supplies,” IEEE Transactions on Power Electronics, Vol 1. PE-2, No. 4. October 1987.
[28] C. Zhou, “Active Boost Power Factor Analysis and Design,” IBM Corporation, April 20, 1989.
[29] TI Texas Instruments, “TL494, Pulse-Width-modulation Control Circuits” Data Sheet, 2003.
[30] TI Texas Instruments, “Optimizing Performance in UC3854 Power Factor Correction Applications” Application Note DN-39E.