研究生: |
邱昶瀚 CHANG-HAN CHIOU |
---|---|
論文名稱: |
陡峭岩坡之傾倒機制探討 Toppling Mechanism of Steep Rock Slope |
指導教授: |
陳志南
Chee-Nan Chen |
口試委員: |
林志森
none 廖瑞堂 none 陳堯中 none |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 營建工程系 Department of Civil and Construction Engineering |
論文出版年: | 2012 |
畢業學年度: | 100 |
語文別: | 中文 |
論文頁數: | 152 |
中文關鍵詞: | 邊坡穩定 、陡峭岩坡 、傾倒 、岩坡角度 、節理組數 、節理勁度比 、岩性 |
外文關鍵詞: | UDEC, steep rock slope, toppling, slope angle, numbers of joint set, stiffness of joints, rock strength |
相關次數: | 點閱:577 下載:5 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
邊坡穩定所需考量的因素及破壞機制,應依不同地形與地質構造而有所不同。因此建立陡峭岩坡之適當分析模式,進行相關之定性與定量分析,瞭解其傾倒作用機制是本研究之目的。本研究利用UDEC軟體進行數值模式分析,重點在探討岩坡傾倒之漸進式破壞歷程,包含各歷程之應力調整、節理面錯動、張力裂縫及塑性區的發展等等,本研究之關注重點。研究結果顯示,陡峭岩坡之力學行為會受岩坡角度、節理組數、節理勁度比、岩性(硬岩、軟岩)等等影響,由漸進式破壞歷程之應力及變形相對大小及分佈,可以提供陡峭岩坡整治及監測布設之參考。
The influential factors and failure mechanisms of steep rock slope are dependant on the topography and geological structure of slope. Therefore, how to establish appropriate analytical model and how to analyze the qualitative and quantitative characterization related to steep rock slope are the purpose of this study.
Numerical code UDEC was used to build numerical model and perform analysis in the study. The investigation focused on the progressive destruction of toppling of steep slope. Important issues include stress redistribution, slip dislocations of joints, tension cracks and the development of the plastic zone.
The analytical results show that the mechanical behavior of steep slope is influenced with slope angle, numbers of joint set, stiffness of joints, rock strength (hard rock, soft rock). Base in the region of equal-stress contour, the magnitude of deformation and plastic zone of different progressive periods, some suggestions are proposed for remediation and monitoring of steep rock slope.
1.Adhikary, D.P., Dyskin, A.V., Jewell, R.J., “A study of the mechanism of flexural toppling failure of rock slopes,” Rock Mechanics and Rock Engnineering, 30 (2), pp. 75-93, (1997).
2.Alzo’ubi, A.K., Martin, C.D., Cruden, D.M., “Influence of tensile strength on toppling failure in centrifuge tests,” International Journal of Rock Mechanics & Mining Sciences, 47, pp. 974-982, (2010).
3.Bandis, S., Lumsden, A.C. and Barton, N.R., “Foundamentals of Rock Joints Deformation.” International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstract, 20 (6), pp. 249-268, (1983).
4.Barton, N.R., Bandis, S. and Bakhtar, K. “Strength deformation and conductivity coupling of rock joints,” International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstract, 22, pp. 121-140, (1985).
5.Duncan, C.W., “Foundations on Rock,” Chap.3, pp. 43~76, E&FNSPON, (1992).
6.Goodman, R.E., “The Deformability of Joints Deformation of the In-Situ Modulus of Deformation of Rock,” ASTM, STP 477, pp. 174-196, (1970).
7.Goodman, R. E. “Introduction to Rock Mechanics,” 2nd Ed., Chap. 3, pp. 55~99, John Wiley&Sons, (1989).
8.Goodman, R. E. “Introduction to Rock Mechanics,” 2nd Ed., Chap. 6, pp. 101~140, John Wiley&Sons, (1989).
9.Goodman, R. E. “Introduction to Rock Mechanics,” 2nd Ed., Chap. 8, pp.293~339, John Wiley&Sons, (1989).
10.Goodman, R.E., and Kieffer, D.S., “Behavior of Rock in Slope,”J Geotechnical Eng (ASCE), 126 (8), pp. 675-684, (2000).
11.Hoek, E., and Bray, J. W., “Rock slope engineering,” 3rd Ed., Inst. of Mining and and Metallurgy, London, (1981).
12.Hoek, E. & Brown, E.T., “Underground Excavation in Rock,” Revised First Ed., pp.87-182, (1982).
13.Itasca Consulting Group. UDEC (Universal Distinct Element Code) Version 3.0. Minneapolis, MN, (1997).
14.Jaeger, J.C., “Shear failure of anisotropic rock,” Geo. Mag., 97, pp. 65-72, (1960).
15.Kimber, O.G., Allison, R.J., and Cox, N.J., “Mechanisms of failure and slope development in rock masses,” Trans. Inst. Br. Geogr., NS 23, pp. 353-370, (1998).
16.Kulitilake, P.H., Ucpirti, S.W., Wang, H.S., Radberg, G. Stephansson, O.,” Use of the Distinct Element Method to Perform Stress Analysis in Rock with Non-persistent Joints and to Study the Effect of Joint Geometry Parameters on the Strength and Deformability of Rock Masses,” Rock Mechanics and Rock Engineering 25(4), pp. 253-274, (1992).
17.Lama, R.D. and Vutukuri V.S., “Hand Book on Mechanical Properties of Rock,” Trans Tech Publications, Germany (1978).
18.Lambe, T.W., and Marr, W.A., “Stress Path Method: Second Edition,” Journal of the Geotechnical Engineering Division, ASCE, Vol.105, No. GT6, pp.727-738, (1979).
19.Nichol, S.L., Hungr, O., Evans, S.G., “Large-scale brittle and ductile toppling of rock slopes,” Canadian Geotechnical Journal, 39, pp. 773-788, (2002).
20.Sjoberg, J., “Analysis of large scale rock slopes,” Doctoral thesis, Department of Civil and Mining Engineering, Lulea University of Technology, Sweden, (1999).
21.Varnes, D.J., “Slope Movement Types and Processes,” Landslide analysis and control, edited by R.L. Schuster and R.J. Krizek. National Academy of Sciences, Washington DC, pp. 11-33, (1978).
22.Voight, B. & Pariseau, W.G., “Rockslides and Avalanches An Introduction,” A contribution to Rockslides and Avalanches 1 Natural Phenomena, ed., pp.1-67, (1978).
23.Yoshinaka, R., Yamabe, T., “Joint stiffness and the Deformation behavior of Discontinuous Rock,” Int.J.Rock. Mech.Min.Sci & Geomech.Abstr, 23 (1), pp. 19-28, (1986).
24.Zhang, J. H., Chen, Z. Y.,Wang, X. G., Han, L. B., “Stability of a toppling slope,” In: Proc., Int. Conference Centrifuge 98, vol. 1, Balkema, Rotterdam, pp. 621-626, (1998).
25.方韻喬,「黏質邊坡與砂值邊坡之坡地建築力學行為探討」,碩士論文,國立台灣科技大學營建工程研究所,臺北,(2010)。
26.林煒僑,「順向坡與斜交坡之降挖機制探討」,碩士論文,國立台灣科技大學營建工程研究所,臺北,(2002)。
27.郭俊河,「順向坡開發之工程穩定性探討」,碩士論文,國立台灣科技大學營建工程研究所,臺北,(2004)。
28.張嘉興,「岩坡穩定之數值分析探討-以溪阿公路岩坡為例」,碩士論文,國立台灣科技大學營建工程研究所,臺北,(2004)。
29.陳崇華,「台十一線海岸公路邊坡崩塌災害分析」,碩士論文,國立東華大學自然資源管理研究所,花蓮,(2004)。
30.陳譽中,「邊坡滑動評估方法探討」,碩士論文,國立台灣科技大學營建工程研究所,臺北,(2005)。
31.陳俐穎,「節理分佈與傾角變化對基礎底面與其下方岩盤之應力與變形探討」,碩士論文,國立台灣科技大學營建工程研究所,臺北,(2010)。
32.鄭富書、朱家德、黃燦輝,「台灣一些軟弱岩石的工程性質」,岩盤工程研討會,第259-267頁,中壢中央大學,(1994)。