簡易檢索 / 詳目顯示

研究生: 陳鈞泰
CHEN - CHUN TAI
論文名稱: 利用風力發電機降低配電饋線損失之研究
Study on the loss reduction of distribution feeders by wind power generators
指導教授: 陳在相
Tsai-Hsiang Chen
口試委員: 辜志承
Jyh-Cherng Gu
蕭瑛東
Ying-Tung Hsia
周至如
CHIH-JU CHOU
學位類別: 碩士
Master
系所名稱: 電資學院 - 電機工程系
Department of Electrical Engineering
論文出版年: 2010
畢業學年度: 98
語文別: 中文
論文頁數: 108
中文關鍵詞: 風力發電機降低饋線損失
外文關鍵詞: wind power generators, the loss reduction of distribution feeders
相關次數: 點閱:283下載:0
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

本論文旨在研究利用風力發電機以降低配電饋線損失。近年來,全世界節能減碳風潮,促使風力發電機迅速發展,如何利用風力發電機以降低配電饋線損失,實有深入探討之必要。本研究係以台電金山變電所二號主變壓器,及其配電饋線系統為範例,並利用此配電系統當中的二條饋線與鄰近六部風力發電機作為分析架構,建置風力發電機、饋線阻抗與負載等效電路模型,並藉由Matlab/Simulink軟體模擬、分析,此六部風力發電機與二條饋線間,其各種併聯狀況可能發生的饋線損失。研究結果顯示,當風力發電機平均併聯於二條饋線上,最有利於降低饋線損失。本論文之研究雖以特定區域模擬,惟其結果可視為通案,做為電業從事配電線路損失改善工作之參考。


The main purpose of this thesis is to investigate the loss reduction of distribution feeders by wind power generators. In recent years, energy efficiency and carbon dioxide emissions reduction, prompted the rapid growth of wind power generators. How to investigate the loss reduction of distribution feeders by wind power generators, there is a depth of need. This study focuses on the Taipower Jinshan substation No.2 main tansformer of distribution feeders, which two feeders and nearby six wind power generators as an example, to construct the wind power generators and feeders impedance and load equivalent circuit model, and using Matlab/Simulink to simulate and analyze, the six wind power generators and the two feeders, the status of its various interconnect feeder loss that may occur. The results show that when the six wind power generators interconnect the two feeders averagely, it is best for the loss reduction of distribution feeders. Although this thesis simulate a specific area, its results can be considered general case, power utilities could take the results as reference to improve the distribution feeder loss.

中文摘要I 英文摘要II 誌 謝III 目 錄IV 圖表索引VII 第一章 緒論1 1.1 研究背景與動機1 1.2 研究方法與歩驟1 1.3 研究貢獻2 1.4 論文架構3 第二章 國內外風力發電之應用現況4 2.1 前言4 2.2 我國得天獨厚的風力資源5 2.3 我國風力發電系統興建現況與規劃6 2.4 國外風力發電概況9 2.5 國外離岸式風力發電發展10 2.6 結語11 第三章 配電線路損失分類與降低線路損失策略12 3.1 前言12 3.2 配電線路損失性質分類12 3.2.1 配電變壓器損失13 3.2.2 計費電表損失15 3.2.3 高低壓線路損失16 3.3 降低配電線路損失策略17 3.3.1 降低低壓線路損失之方法17 3.3.2 降低配電變壓器銅損與鐵損之方法18 3.3.3 虛功補償電容器改善功率因數19 3.4 結語20 第四章 配電饋線與風力發電機之模型建構21 4.1 前言21 4.2 建立配電饋線元件與感應式發電機qd0軸的等效電路21 4.2.1 建立配電饋線阻抗qd0軸等效電路23 4.2.2 建立電感性負載qd0軸等效電路24 4.2.3 建立配電饋線電容qd0軸等效電路25 4.2.4 建立感應式發電機qd0軸等效電路26 4.3 建構範例配電饋線系統與感應式風力發電機30 4.3.1 建構範例配電饋線系統30 4.3.2 範例配電系統饋線損失模擬計算36 4.3.3 模擬Vestas V47-660kW感應式風力發電機39 4.4 結語45 第五章 風力發電機對配電饋線損失影響分析46 5.1 前言46 5.2 範例配電系統併風力發電機之模擬46 5.2.1 案例1_集中併聯於變電所內匯流排之饋線損失47 5.2.2 案例2_集中併聯於C2之饋線損失51 5.2.3 案例3_集中併聯於C3之饋線損失55 5.2.4 案例4_集中併聯於D2之饋線損失59 5.2.5 案例5_平均分配於C2、C3之饋線損失63 5.2.6 案例6_平均分配於C2、D2之饋線損失67 5.2.7 案例7_平均分配於C3、D2之饋線損失71 5.2.8 案例8_平均分配於C2、C3、D2之饋線損失75 5.3 範例配電系統模擬案例之饋線年損失分析79 5.3.1 範例配電系統未併聯風力發電機之饋線年損失分析80 5.3.2 案例1-8之饋線年損失分析80 5.4 結語82 第六章 結論與未來研究方向83 6.1 結論83 6.2 未來研究方向83 參考文獻85 附錄A87 作者簡介93

[1]台灣電力公司,「風力發電十年發展計畫」,民國九十一年七月。
[2]World Wind Energy Association,“World Wind Energy Report 2009”,2010.
[3]台灣電力公司,「風力發電第一期計畫可行性研究報告」,民國九十一年七月。
[4]經濟部能源局,「能源政策白皮書」,網址:http://web2.moeaboe.gov.tw/ECW/Policy/EnergyWhitePaper/94/main/main.html
[5]英華威公司,「風力發電的好處」,網址:http://www.infra-vest.com/TC/4-2.htm
[6]楊明浩、余政達,「台灣地區陸上及離岸式風力發電潛力及效益評估」,資源與環境學術研討會論文集,第122-134頁,民國九十五年。
[7]呂威賢,「風的故事」,科學發展,第383期,第12-13頁,民國九十三年十一月。
[8]張鼎煥、呂威賢,「我國風力發電發展政策效益分析」,台灣風能協會第一屆學術研討會論文集,第15-21頁,民國九十六年一月。
[9]Global Wind Energy Council,“Global Wind 2009 Report”,2010.
[10]The European Wind Energy Association , “Offshore Statistics January 2009” ,2009.
[11]經濟部能源局,「再生能源新發展--我國離岸風力開發正式上路」,能源報導9611,第27頁,民國九十六年十一月。
[12]林承龍,「離岸式風力發電機組之技術發展及設計」,行政院及所屬各機關出國報告,民國九十五年三月。
[13]蘇偉府、陳裕清、劉志文、黃世杰、劉憲宗、蔡耀友、簡佑銘、黃佳文、楊海鵬,「配電系統損失分析改善及效益評估研究」, 台灣電力股份有限公司研究計劃完成報告,民國九十六年七月。
[14]Jieli Li Abdallah, T.Sullivan, C.R.Dartmouth, Coll. Hanover,“Improved calculation of core loss with nonsinusoidal waveforms” Industry Applications Conference Thirty-Sixth IAS Annual Meeting. Conference Record of the 2001 IEEE Volume 4,Issue,30 Sep-4 Oct 2001,pp.2203 -2210 vol.4 ,2001.
[15]John, J.K.,Sarkar, S.“A comparison of IEC 76 and ANSI C57.12 on transformers”Pulp and Paper Industry Technical Conference ,1999. Conference Record of 1999 Annual Volume , Issue ,21-25 Jun 1999,pp.204–208,1999.
[16]台灣電力公司,「台灣電力公司材料標準C003(96-07)耐候性瓦時計」,民國九十六年。
[17]楊哲章,「認識變壓器」,網址:http://designer.mech.yzu.edu.tw/
[18]Chee-Mun Ong “Dynamic simulation of Electric machinery Using Matlab/Simulink,” Pearson Education Taiwan Ltd., pp.142-144,2005.
[19]Chee-Mun Ong “Dynamic simulation of Electric machinery Using Matlab/Simulink,” Pearson Education Taiwan Ltd., pp.145-148,2005.
[20]Chee-Mun Ong “Dynamic simulation of Electric machinery Using Matlab/Simulink,” Pearson Education Taiwan Ltd.,pp.148-150,2005.
[21]Chee-Mun Ong “Dynamic simulation of Electric machinery Using Matlab/Simulink,” Pearson Education Taiwan Ltd., pp.167-182,2005.
[22]盧展南、劉承宗、王醴、鄧人豪、陳野正仁,「風力發電對系統衝擊影響之研究」,台灣電力股份有限公司研究計劃完成報告,第222頁,民國九十二年七月。
[23]經濟部能源局,「1度電的話題」,能源報導9807,第11-13頁,民國九十八年七月。

無法下載圖示 全文公開日期 2015/08/03 (校內網路)
全文公開日期 本全文未授權公開 (校外網路)
全文公開日期 本全文未授權公開 (國家圖書館:臺灣博碩士論文系統)
QR CODE