研究生: |
彭裕棋 Vici Yuchi Peng |
---|---|
論文名稱: |
應用陣列相機於人像拍攝與立體呈現之研究 Study on Studio Photography and Auto-stereoscopic Reproduction by Camera Array |
指導教授: |
林宗翰
Tzunghan Lin |
口試委員: |
孫沛立
Pei-Li Sun 林宗翰 Tzunghan Lin 歐立成 Li-Chen Ou 陳怡永 Yi-Yung Chen |
學位類別: |
碩士 Master |
系所名稱: |
應用科技學院 - 色彩與照明科技研究所 Graduate Institute of Color and Illumination Technology |
論文出版年: | 2019 |
畢業學年度: | 107 |
語文別: | 中文 |
論文頁數: | 70 |
中文關鍵詞: | 分光式光柵 、裸眼顯示器 、陣列相機 、斜紋光柵 、立體人像攝影 |
外文關鍵詞: | Lenticular lens, Auto-stereoscopic 3D Display, Camera Array, Slanted-lenticular lens, Commercial Portrait Photography |
相關次數: | 點閱:319 下載:5 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本研究針對分光式光柵裸視立體呈現技術,與多相機拍攝技術結合應用,進而發展推出人像攝影或大型商業攝影的裸視立體影像輸出。本研究自行開發以17台陣列相機並搭配4視角的裸視顯示器的攝影系統,可快速產生多視角影像。並透過顯示器預覽畫面立體度效果,從而得知印刷輸出後的立體呈現概況並經由挑選後進行實際印刷輸出。
本研究透過人因實驗記錄受測者對於此研究系統架構所產生出的3D裸視影像,並應用於現有商業攝影、人像攝影、婚紗攝影的市場。影像分別為拍攝三種主題的照片,依序為複雜擺設配件主題、動態瞬間捕捉畫面主題、多人物的拍攝主題,分別對此三種主題進行3D裸視圖像的立體度、舒適度評測。藉由此測試結果可以預測市場的接受度及喜好度。甚至能透過實驗中的數據調整拍攝主題內的布置,
符合客戶對於3D裸視圖像的立體感受及舒適度感受,使的此研究中的系統加入現有的人像攝影、商業攝影市場,進而發展出新型態的服務。
The thesis focuses on Auto-stereoscopic 3D display and Lenticular printing, using camera array to capture images for new applications in Auto-stereoscopic technology for portrait photography and commercial photography. The proposed prototype used 17 cameras to build camera array, and was equipped with four-view auto-stereoscopic 3D display. This photography system can generate multi-view images promptly. Also, through the preview fuction of the Auto-stereoscopic images on the system, the 3D effect of the images can be presented for selection for Lenticular printing.
The system’s application in existing markets for portrait photography and commercial photography were tested. To ensure its application and functionality, experiments involving human subjects were conducted. The experiments used 3 kinds of photography themes─Complex furnishings, Bullet time, and Multi people portrait─to record the respondents’ comfort level and evaluation of the stereoscopic effect. Through the experiments and analysis, acceptance and likabiling of this technology in the markets can be predicted. Further adjustments of the objects in these photograpy themes can be made base on the results of the experiments to suit customers’ desired comfort level and stereoscopic effect. Finally, the system in this study can be added to the existing markets of portrait photography and commercial photography, and create a new type of service.
[1] Y. Zhang, Q. Ji, and W. Zhang, “Multi-view autostereoscopic 3D display,” International Conference on Optics, Photonics and Energy Engineering (OPEE), Jun. 1-5, Taipei, Taiwan, pp. 300-310, 2010.
[2] D. Roberts, “History of lenticular and related autostereoscopic methods,” Leap Technol., pp. 17-24, 2003.
[3] G. K. von Noorden, E. C. Campos, “Binocular Vision and Ocular Motility,’’ A Harcourt Health Sciences Company, London, 2002.
[4] T. -H. Lin, S. -J. Hu, “Perceived Depth Analysis for View Navigation of Stereoscopic Three-dimensional Models,’’ Journal of Electronic Imaging, Vol. 23, No. 4, pp. 043014-1–043014-12, 2014.
[5] K. Whissel, “Parallax Effects: Epistemology, Affect and Digital 3D Cinema.” Journal of Visual Culture, vol. 15, no. 2, pp. 233–249, Aug. 2016.
[6] M. Ross, Miriam. “Stereoscopic Visuality: Where Is the Screen, Where Is the Film?” Convergence, vol. 19, no. 4, pp. 406–414, Nov. 2013.
[7] A. Jones, J. E. Swan, G. Singh and E. Kolstad, “ The Effects of Virtual Reality, Augmented Reality, and Motion Parallax on Egocentric Depth Perception, ” 2008 IEEE Virtual Reality Conference, Reno, NE, pp. 267–268, 2008.
[8] X. Lin, J. Wu, G. Zheng, “ Camera array based light field microscopy. ” Biomedical Optics Express vol. 6,93179–89. 3 Aug. 2015.
[9] V. Vaish, B. Wilburn, N. Joshi, M. Levoy, “ Using Plane + Parallax for Calibrating Dense Camera arrays. ” Proceedings of the 2004 IEEE Computer Society Conference on Computer Vision and Pattern Recognition, 2004. CVPR 2004. 1 (2004): I-I.
[10] R. Ng, “ Digital Light Field Photography, ” Ph.D. Thesis, Stanford University, CA USA, Chapter 2, 2006.
[11] M. Goesele, B. Curless and S. M. Seitz, “ Multi-View Stereo Revisited, ” 2006 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'06), New York, NY, USA, 2006, pp. 2402–2409.
[12] P. Wang and C. Fuh, “ Automatic White Balance with Color Temperature Estimation, ” 2007 Digest of Technical Papers International Conference on Consumer Electronics, Las Vegas, NV, USA, pp. 1–2, 2007.
[13] 陳鴻興 總編輯,魏碩廷、徐明景、李文淵、謝翠如、吳瑞卿、孫沛立 編著,「色彩新論 從心裡設計到科學應用」,五南圖書出版股份有限公司,台北,2018。
[14] Z. Zhang, “ Flexible camera calibration by viewing a plane from unknown orientations, ” Proceedings of the Seventh IEEE International Conference on Computer Vision.,vol. 1, pp. 666–673, 1999.
[15] P. Aflaki, “ Simultaneous 2D and 3D perception for stereoscopic displays based on polarized or active shutter glasses. ” J. Visual Communication and Image Representation 25, pp. 622–631, 2014.
[16] S. Scher, J. Liu, R.Vaish, P. Gunawardane, J. Davis, “ 3D+2DTV: 3D Displays with No Ghosting for Viewers Without Glasses, ” ACM Transactions on Graphics 32, pp. 21:1–21:10, 2013.
[17] D. He, T. Xu, Y. Wang, H. Hua, Y. Hu, “ Head-mounted display system for virtual reality,” Proceedings of SPIE - The International Society for Optical Engineering, vol. 2892, pp. 126–128, 2007.
[18] S. Pastoor, M. Wöpking, “ 3-D display: A review of current technologies, ” Displays, 17, pp. 100–110, 1997.
[19] P. Surman, S. Wang, Z. Zhuang, H. Wang, O. Yaroshchuk, X. Sun,“ Display Development in the Advanced Displays, ” 2016 Progress in Electromagnetic Research Symposium (PIERS), Shanghai, pp. 3387–3392, 2016.
[20] 葉展覞,「彩色畫素排列對柱狀透鏡型裸視立體影像品質影響之研究」,國立成功大學碩士論文,第二章,2017。
[21] Z. Zhuang, P. Surman, L. Zhang, R. Rawat, S. Wang, Y. Zheng, “ Moiré-Reduction Method for Slanted-lenticular-based Quasi-three-dimensional Displays, ” Optics Communications., vol. 381, pp. 314–322, 2016.
[22] 黃則銘,「柱狀透鏡之即時裸視立體顯像操控之實現」,國立交通大學碩士論文,第二章,2018。
[23] V. Berkel,“Image Preparation for 3D-LCD,”Philips Reseach Laboratories, Redhill, UK, 1999。
[24] 吳文和,「隨機點立體成像技術及其應用於光柵板立體印刷之研究」,世新大學碩士論文,第三章,2005。
[25] 王新富,「裸視式立體顯示器之視覺舒適度研究」,國立台灣科技大學碩士論文,第二章、第三章,2015。
[26] 林智祥,「3D影像之立體感與舒適度探討」,國立交通大學碩士論文,第二章,2014。
[27] F. L. Kooi and A. Toet, “ Visual comfort of binocular and 3D Displays, ” Vol. 25, No.2-3, pp. 99–108, 2004.
[28] Filippo Speranza, L. B. Stelmach, W. J. Tam, R. Glabb, “Visual comfort and apparent depth in 3D in systems: Effect of camera convergence distance,” Proceedings of SPIE, vol. 4864, pp. 146–156, 2002.
[29] P. C. Wang, K. Y. Chen, S. L. Hwang and C.-S. Chen, “ The effect of Stereoscopic Display Luminance and Ambient Illuminance on Physiological Measurement and Image Quality, ” Proceedings of SPIE - The International Society for Optical Engineering, vol. 8043, pp. 80430D-1–80430D-7, 2011.
[30] H. S. Chen, C. C. Huang, M. R. Luo, “ Visual comfort in 2D/3D modes of glasses-type stereoscopic display, ’’ Journal of the Society for Information Display, pp. 94–102, 2013.
[31] 洪翎凱,「擴增實境於婚紗攝影之應用」,國立台灣藝術大學碩士論文,第二章、第三章,2017。
[32] 何瑋琳,「創新消費者對於立體婚紗產品之使用意願」,國立台灣藝術大學碩士論文,第二章、第三章,2013。
[33] 黃亞琪,「婚顧市場每年成長 20%」。理財周刊 268 期, Oct. 2005。
[34] 洪震宇,「台灣婚紗業稱霸世界第一」。天下雜誌 321 期,Apr. 2011。