現今三維模型在各個領域中普遍被使用，其中模型的產生方式，大多是使用三維建模軟體或三維掃描，然而透過三維掃描得到的三維模型，其混亂和不規則的網格結構讓後續應用上不太方便，因此，必須對網格進行重製。網格重製一直是電腦圖學領域核心研究對象之一，目的是要讓原始模型的混雜網格結構可以重新計算並得到整齊、規律和漂亮的網格結構。本研究結合了兩種骨架導向及表面流場兩種網格重製方法，利用骨架資訊得到對應網格分區，並根據分區資訊進行流場設計以及利用整體參數化的方法達成網格重製，使產生的網格同時具有基於流場的方法在複雜分支區域的適應性，及以骨架為基礎的方法中，重製的網格符合骨架走向的呈現，並且網格可根據骨架進行拆解的特性。

3D models are widely used in every field today. The most common ways to create 3D models are 3D modeling softwares and scanning. However, the models acquired with scanning have the issue of irregular geometric structure, limiting their applicability. A remeshing process is needed to make those models more applicable. Remeshing has been one of the popular subjects in computer graphics. The purpose of remeshing is to reconstruct a mesh into a more uniformly and orderly shaped mesh.In this paper, a new method is proposed to improve the remeshing process that
computing a coarse quad structure that fits with skeleton by subdivided boxes and projecting this structure onto origin model. The problem with the method is that all subdivided boxes have to be recalculated when any single box is changed due to the boxes being interconnected. Another issue is that the fold-overs tend to happen on the result mesh when the torsions of boxes are not properly handled. In the proposed method, models are first divided into partitions based on skeleton data, and then line fields and mesh grid are generated according to the types each partition. Because the method only considers the original mesh, errors caused by projection and the complex process of place subdivided boxes are avoided.

[1] C.Y. Yao, H. K. Chu, T. Ju, T. Y. Lee, "Compatible quadrangulation by sketching," Computer Animation and Virtual Worlds, vol. 20, pp. 101–109, 2009.
[2] F. Usai, M. Livesu, E. Puppo, M. Tarini, and R. Scateni, “Extraction of the quad layout of a triangle mesh guided by its curve skeleton," ACM Transactions on Graphics (TOG), vol. 35, no. 1, p. 6, 2015.
[3] C.-Y. Yao, M.-T. Chi, T.-Y. Lee, and T. Ju, "Region-based line field design using harmonic functions,” IEEE transactions on visualization and computer graphics, vol. 18, no. 6, pp. 902-913, 2012.
[4] D. Bommes, H. Zimmer, and L. Kobbelt, "Mixed-integer quadrangulation," in ACM Transactions On Graphics (TOG), vol. 28, p. 77, 2009.
[5] V. Guillemin and A. Pollack, Differential topology, vol. 370. American Mathematical Soc., 2010.
[6] O. K.-C. Au, C.-L. Tai, H.-K. Chu, D. Cohen-Or, and T.-Y. Lee, "Skeleton extraction by mesh contraction," in ACM Transactions on Graphics (TOG), vol. 27, p. 44, 2008.
[7] S. Katz and A. Tal, Hierarchical mesh decomposition using fuzzy clustering and cuts, vol. 22. ACM, 2003.
[8] K. Lawonn, R. Gasteiger, C. Rössl, and B. Preim, "Adaptive and robust curve smoothing on surface meshes," Computers & Graphics, vol. 40, pp. 22–35, 2014.
[9] J. Palacios and E. Zhang, "Rotational symmetry field design on surfaces," in ACM Transactions on Graphics (TOG), vol. 26, p. 55, 2007.
[10] E. Zhang, K. Mischaikow, and G. Turk, "Vector field design on surfaces," ACM
Transactions on Graphics (ToG), vol. 25, no. 4, pp. 1294–1326, 2006.
[11] M. Desbrun, M. Meyer, P. Schröder, and A. H. Barr, "Implicit fairing of irregular meshes using diffusion and curvature flow,” in Proceedings of the 26th annual conference on Computer graphics and interactive techniques, pp. 317–324, ACM Press/Addison-Wesley Publishing Co., 1999.
[12] M. Garland and P. S. Heckbert, "Surface simplification using quadric error metrics,” in Proceedings of the 24th annual conference on Computer graphics and interactive techniques, pp. 209–216, ACM Press/Addison-Wesley Publishing Co., 1997.
[13] E. Welzl, "Smallest enclosing disks (balls and ellipsoids)," in New results and new trends in computer science, pp. 359-370, Springer, 1991.
[14] S. Katz, G. Leifman, and A. Tal, "Mesh segmentation using feature point and core extraction," The Visual Computer, vol. 21, no. 8-10, pp. 649–658, 2005.
[15] X. Tricoche, G. Scheuermann, H. Hagen, and S. Clauss, "Vector and tensor field topology simplification, tracking, and visualization," in PhD. thesis, Schriftenreihe Fachbereich Informatik (3), Universität, Citeseer, 2002.
[16] G. Scheuermann, H. Kruger, M. Menzel, and A. P. Rockwood, "Visualizing nonlinear vector field topology," IEEE Transactions on Visualization and Computer
Graphics, vol. 4, no. 2, pp. 109-116, 1998.
[17] D. Kirsanov and S. J. Gortler, Minimal discrete curves and surfaces. Harvard University, 2004.
[18] M. S. Floater, "Mean value coordinates," Computer aided geometric design, vol. 20, no. 1, pp. 19–27, 2003.
[19] J. Palacios and E. Zhang, "Interactive visualization of rotational symmetry fields on surfaces," IEEE transactions on visualization and computer graphics, vol. 17, no. 7, pp. 947–955, 2011.
[20] D. Bommes, B. Lévy, N. Pietroni, E. Puppo, C. Silva, M. Tarini, and D. Zorin, "Quad-mesh generation and processing: A survey,” in Computer Graphics Forum, vol. 32, pp. 51-76, Wiley Online Library, 2013.
[21] N. Ray, W. C. Li, B. Lévy, A. Sheffer, and P. Alliez, "Periodic global parameterization," ACM Transactions on Graphics (TOG), vol. 25, no. 4, pp. 1460-1485, 2006.
[22] F. Kälberer, M. Nieser, and K. Polthier, "Quadcover-surface parameterization using branched coverings,” in Computer graphics forum, vol. 26, pp. 375–384, Wiley Online Library, 2007.
[23] S. Dong, S. Kircher, and M. Garland, "Harmonic functions for quadrilateral remeshing of arbitrary manifolds,” Computer aided geometric design, vol. 22, no. 5, pp. 392 423, 2005.
[24] O. Sorkine and D. Cohen-Or, "Least-squares meshes," in Shape Modeling Applications, 2004. Proceedings, pp. 191-199, 2004.
[25] M. Marinov and L. Kobbelt, "Direct anisotropic quad-dominant remeshing," in Computer Graphics and Applications, 2004. PG 2004. Proceedings. 12th Pacific Conference on, pp. 207-216, IEEE, 2004.