研究生: |
利釗晋 Chao-Chin Li |
---|---|
論文名稱: |
專案管理於預拌混凝土廠品質管理之研究 The Research of Project Management in Implementing the Quality Management of Ready-Mixed Concrete Plants |
指導教授: |
黃兆龍
Chao-Lung,Hwang |
口試委員: |
沈淂獻
Der-Hsien,Shen 湛淵源 Yuan-Yuan,Chen |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 營建工程系 Department of Civil and Construction Engineering |
論文出版年: | 2005 |
畢業學年度: | 93 |
語文別: | 中文 |
論文頁數: | 189 |
中文關鍵詞: | 專案管理 、自充填混凝土 、高性能混凝土 |
外文關鍵詞: | HPC, SCC, Project Management |
相關次數: | 點閱:307 下載:11 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
專案管理於預拌混凝土廠品質管理之研究
研 究 生:利釗晋
指導教 授 : 黃兆龍
時 間:94年7月
論文摘要
混凝土於預拌廠之生產作業流程中,從各材料取得進廠、採樣分析、混合級配、設計配比、配比試拌、坍度試驗、試體製作、試體養生,並經過運送、攪拌、泵送、澆置、搗實、養護等過程。就從產製過程計算,混凝土施工完成需經過三種環境(預拌廠、輸送途中、工地),且亦須透過三個以上的廠商(預拌廠商、泵送商、施工廠商)配合完成,而成品須於養護驗收後始算完成,無法於此期間切割獨立完成,與一般製造業相比,其介面複雜、製造及環境影響關係甚密,另因不同結構、地區、環境其施工方式不盡相同之多重因素影響下,混凝土產製須達成既定目標,實須面面俱備、缺一不可。
然而,面對影響混凝土品質因素之如此複雜,如材料、試驗、施工單位、施工作業、法令制度、設計單位、招標發包、評估驗收等,預拌混凝土產業面對這些問題,除需以品質管理的方法來維持品質外,更應考量各案之範疇、時間、成本、風險和品質間之需求競爭及利害關係人彼此不同的需求及期望等,而以專案整體考量的方式執行。
在預拌混凝土廠文獻研究中,主要強調於預拌混凝土之品質管制範圍,相關文獻在品質探討上亦多著墨於ISO、Six Sigma及相關之品質管理理論應用於各企業領域之研究,以專案管理的角度及比較之文獻較少,故本文以專案管理方式進行研究並以實例分析,針對高性能混凝土(HPC)、自充填混凝土(SCC)工程,由專案團隊參與管理,從「料源管制」、「配比驗證」、「製程管制」、「成品管制」及「端末管制」等作業確實執行之成果,證實為預拌混凝土產業未來執行之一可行方案。
關鍵詞:高性能混凝土(HPC)、自充填混凝土(SCC)、專案管理(Project Management)
The Research of Project Management in Implementing the Quality Management of Ready-Mixed Concrete Plants
Thesis Advisor : Chao-Lung Hwang
Graduate Student : Chao-Chin Li
ABSTRACT
Concrete in the production process of the ready-mixed company, the company from obtaining material ,sampling analysis,admixture gradation, gradation design ,trial batch,slump test, specimen manufacture and curing , and pass by transportation, mixed,pump ,pour and place,and curing etc. According to the produce of the process, the construction of the concrete to be complete that need to through three kinds of environment(ready-mixed company, the way of transmissibility and construction plant), and also must through more than three manufacturers( the manufacturer of ready-mixed , sender of the pump and manufacturer of construction). However, the product must complete after curing. It can't incise the period to complete. Comparing with general manufacturing industry, its complicacy of the interface, fabrication and relation of the effect of surrounding is affected very closely . Also from different structure, region and environment etc, concrete in the production to the target must be complete in every aspect and do not lack anyone.
However, the face to affect the quality of the concrete is such complicacy, example to the material, test, construction, operation of the construction, system of the ordinance, company of the design and public bidding, valuation, to check on delivery etc. The ready-mixed concrete faces these problems, in addition to maintain the quality with quality management, also should take examinations category to time, cost, risk and quality etc with a consideration of demand and hope of the stakeholderk,and used by project of overall consideration.
Most of research in the factory of the ready-mixed concrete that mainly emphasize in the sphere of the control of the quality , related documents on the study of the quality also emphasize to ISO and Six Sigma and quality controlled theory of the quality apply in the research of enterprise. They are less with the view of the project management and the document of the comparison, so this text with the way of project carried on research, also with example analysis, the subject stress to case example analysis in the research of the hige performance concrete(HPC) and the self compacting concrete(SCC) . The project management team take charge the project,from material source control ,mixture proportioning prove,process control,product control and end control etc that been proven are the feasibility way of the factory of the ready-mixed concrete to operate.
keyword:HPC、SCC、Project Management
參考文獻
1. 台灣營建研究院,「營建物價第47期」,台灣營建研究院,民國九十四年。
2. 「災後重建提昇混凝土品質研討會論文集」,民國八十九年。
3. 簡聰海、李永晃,「全面品質管理」,高立圖書有限公司,民國九十三年。
4. 胡秀昌、黃兆龍,「目前預拌混凝土品質問題探討」,中華民國建築學會--第一屆建築學術研究發表會論文集,第315∼324頁,民國七十七年。
5. 黃兆龍,「混凝土品質保證-檢驗與制度」,詹氏書局,民國八十八年。
6. 胡秀昌、黃兆龍,「預拌混凝土品質管制與合理單價之研究」,中華民國建築學會--第一屆建築學術研究發表會論文集,第325∼332頁,民國七十七年。
7. 蔡政博,「預拌混凝土之製造技術」,台灣區預拌混凝土工業同業公會會刊第三期,民國八十五年。
8. 陳振川、張光甫、林世強,「全面混凝土品質提昇制度之推動」,民國89年。
9. 陳俊旭,「台灣北部地區預拌混凝土廠品質管制制度之研究」,國立台灣科技大學/營建工程系碩士論文,民國八十九年。
10. 蕭慈惠,「ISO 9001品質保證系統之發展沿革及未來趨勢探討—兼論資源最佳化」,高雄第一科技大學營建工程系碩士論文,民國八十八年。
11. 林榮堂,「國內中小型製造業實施ISO 9000:2000年版品質管理系統之績效研究」,朝陽科技大學/企業管理系碩士論文,民國九十一年
12. 唐勤修,「六標準差在ISO 9001:2000環境中實施模式之建構研究」,龍華科技大學商學及管理研究所碩士論文,民國九十二年。
13. 王亞屏,「TQM進程與ISO 9000、Six Sigma異同性研究」,義守大學/工業工程管理學系碩士論文,民國九十三年
14. 賴文同(2000),「品質成本衡量及其實效益之分析-國內某家庭用紙製造廠之個案研究」,台灣大學工業工程研究所碩士論文。
15. 戴久永審訂,「品質管理(原著:S.Thomas Foster”Managing Quality An Integrative Approach ”) 」,台灣培生教育出版股份有限公司,民國九十一年。
16. 林公孚,「追求卓越品質-邁向TQM之道」,中華民國品質學會,民國八十七年。
17. 林木榕,「台灣製造業執行品質管理活動之研究」,國立清華大學/工業工程與工程管理研究所碩士論文,民國九十三年
18. 邱先煌,「企業六標準差訓練規劃實務之研究」,中華大學科技管理研究所碩士論文,民國九十三年。
19. 張耿通,「全面品質管理與六標準差實施方案之比較分析-以台灣地區之企業為例」,國立成功大學管理學院高階管理碩士在職專班碩士論文,民國九十二年。
20. 賴榮仁譯,「六個希格碼的管理(原著:Forrest W.Breyfogle III,James M. Cupello&Becki Meadows”Managing Six Sigma ”) 」,哈佛企業管理顧問公司,民國九十年。
21. Cleland D.I.,King W.R.”System Analysis and project management”, NY:Graw-Hill,Inc.(1983)
22. Kerzner Harold & Cleland D.I.”Project/Matrix Management Policy and Strategy”,Van Nostrand Reinhold.(1985)
23. Pinto J.K.& Slevin D.P.”Project Success:Definition and Measurement Techniques”, Project Management Journal,Vol 19(1),pp.67-72(1988).
24. Samuek J.Mantel,Jr. Jack R. Meredith, Scott M. Shafer, Margaret M. Sutton”Core Concetps of Porject Management”,JOHN WILEY&SONS,INC (2005)
25. Kerzner Harold,”Project Management:A System Approach to Planning,Scheduling and Controlling, NY:Van Nostrand Reinhold.(2003)
26. Clifford L.Gray & Erik W. Larson,”Project management ,The Managerial Process”,Mc Graw Hill(2005).
27. 許光華、龔旭元、沈肇基,「專案管理」,國立空中大學,民國九十二年。
28. Project Management Institute, ”PMBOK(R) Guide (2000). A Guide to the Project Management Body of Knowledge.”, Newtown Square
29. David I. Cleland & Lewis R. Ireland,”Project Management –Strategic Design and Implementation”,Mc Graw Hill(2004)
30. 劉毓,「全球品質管理狂朝-ISO 9001:2000版的挑戰」,水星文化事業出版社,民國九十年。
31. 科建管理顧問股份有限公司,「ISO 9000:2000品質管理系統實務」,民國91年1月。
32. 黃嘉彥,「國際品保標準精要暨文件製作實務-2000年版」,五南圖書出版公司,民國九十二年。
33. 郭建良,「ISO9001:2000品質管理系統之關鍵因素與組織績效關聯性之研究-以台灣南部製造業為例」,國立成功大學/管理學院高階管理碩士在職專班碩士論文,民國九十二年。
34. 湯瑪士、派特,「六標準差專案規劃高手」,博頡策略顧問股份有限公司,民國九十四年。
35. 王雪明,「六標準差專案管理」,中華民國品質學會,民國九十四年。
36. 許元全,「六標準差應用於專案改善之績效評估-以A公司為例」,國立成功大學工業與資訊管理學系碩士在職專班碩士論文,民國九十三年
37. 馬敬文,「企業專案管理的關鍵時刻」,慧泉專案管理顧問公司,民國九十四年。
38. 康德龍,「預拌混凝土之製造技術」,台灣區預拌混凝土工業同業公會會刊第十三期,民國九十年。
39. 李湘駒,「國內預拌混凝土產業關鍵成功因素之研究」,國立中正大學/企業管理研究所碩士論文,民國九十一年
40. **預拌混凝土公司,「ISO:2000品保手冊及程序書」,民國九十四年。
41. 廖肇昌,「混凝土品質問題檢討」,混凝土品管與驗證—台灣營建研究院,第129∼136頁,民國九十年。
42. 黃兆龍,”高性能混凝土設計及應用”,國立台灣科技大學,民國八十八年。
43. Project Management Institute, ”Practice Standard for Work Breakdown Structures.”, Newtown Square
44. Project Management Institute, ”Organizational Project Management Maturity Model(OPM3)”, Newtown Square
45. Project Management Institute, ” A Guide to the Project Management Body of Knowledge. ”,Third Edition, Newtown Square
46. 「我懂了專案管理」,美商博捷盛國際專案管理顧問集團(PSIG)大中華區執行長,民國九十四年。
47. 楊錦懷、黃世建、沈進發,「大型預鑄混凝土組件在國內推擴應用之研究」,經濟部工業局,台北市,1991年6月。
48. 汪爕之,實用土木工程施工學上冊,國立編譯館主編,1999年3月。
49. Okamura, H. and K. Ozawa, “Mix Design for Self-Compacting Concrete,” Concrete Library of JSCE, No.25, June 1995.
50. Okamura, H., “Self-Compacting High Performance Concrete,”ACI Concrete International, 50-54, July 1997.
51. Nagamoto, N. and K. Ozawa, “Mixture Proportions of Self-Compacting Concrete,” High Performance Concrete: Design and Materials and Advances in Concrete Technology, ACI SP-172, pp. 623-636, 1997.
52. 詹穎雯、陳育聖,「SCC均勻性與鋼筋握裹性質之研究」,混凝土結構耐久性技術研討會,台灣營建研究院主辦,2000,9。
53. 黃兆龍,混凝土性質與行為 第三版,詹氏書局,2002,10。
54. 黃兆龍,高性能混凝土理論與實務,詹氏書局,2003,4。