本研究主要以改善EPDM與PET之間界面接著性為主，由於EPDM本身不具官能基，表面接著性不佳，本研究將EPDM以接枝方式將EPDM導入MAH，使其具有官能基，利用滴定法、FT-IR來檢測接枝率及官能基，以及將PET以不同溫度及時間含浸Pyrrole之方式，使其Pyrrole進入PET使其產生表面粗糙度，利用DSC、X-ray觀察PET結晶度變化、TGA觀察PET熱性質、SEM則用來觀察表面型態，最後將以最好接枝率之EPDM來與PET進行拉拔測試來找出最好之界面接著性。

The aim of this study is to focus on improvement of the interfacial adhesion between EPDM and PET. In this study we try use the grafting technique to introduce MAH into EPDM to produce the functional groups due to the lack of functional groups and bad adhesion of EPDM itself. Furthermore the PET fibers dipped with Pyrrole at different temperature for different time to enhance surface roughness and the dipped PET fibers with better GR (grafting ratio) would be determined the interfacial adhesion by pull-out test. This study also investigated the surface morphology through SEM, the degree of crystallization through DSC、 X-ray and thermal properties through TGA.

[1] H.T.Chiu, J.S.Lin, 1992,J. of Materials Science,27, 319-327
[2] H.T.Chiu, J.H.wang 1998, J of Applied Polym. Sci., Vol.68,
1387-1295
[3] H.T.Chiu, J.H.wang Chinese Journal of Material Science,
Vol.27,No.4, pp. 249-257
[4] J.S.Lin,H.T.Chiu, 2001, Polymer & Polymer Coposites, V.9,
NO.5, 1-7.
[5] L.P.Rector , Synthetic Metals, 41-43
[6] 朱玉俊. 彈性體的力學改性, 北京:科學技術出版社, 1991.
[7] 鄧本誠等.並用與橡塑共混技術—性能、工藝配方,北京:化學
工應出版社
[8] 藤韶一郎．Plastical Age，1996，12(3)：47
[9] Anon L．M．Chemical and Engineering News，1964，42(11)：
54
[10] Hsiech H．L．Plastics Age，1965，l 1(4)：394
[11] 金關泰.高分子化學的理論和應用進展,北京,中國石油化工
出版社,1995．
[12] 村泰彥著,路亞珊摘譯.橡膠工業,1997,44(12):737
[13] 玉俊,王勳林.橡膠工業,1987,34(9):40
[14] 陳國,劉文冰,王永利.化工新型材料,2001,29(8):8
[15] 竹村泰彥橡膠工業,1997,12:737~741
[16] 中國專利:85102222A,1986
[17] 中國專利:1059533A,1992
[18] Coran A.Y. , Patel R.P. Rubber Chem.Techn01. ,1980,53:141.
[19] Toshio Inoue. J.Appl.Polym.Sci, 1994,54:710
[20] Janssen L.P.B.M.,On the stability of reactive extrusion[J],
Polymer Engineering&Science, 1998, 38(12):2010-2019
[21] 馬里諾.贊索斯,瞿金平等譯,反應擠出一原理與實踐【M】,
北京:化學工業出版社, 1999,9-15
[22] 張廣成,聚烯烴的反應擠出研究【D】,西北工業大學,2001
[23] 姚小利,熔融接枝反應改進聚烯烴粘結性的研究【J】,現代塑
膠加工應用,2002,14(5): 1-6
[24] 陶四平,李忠明,馮建民等,聚烯烴接枝改性功能化的研究進
展【J】,中國塑膠,2002, 16(5):1-5
[25] Russet K E., Grafting of malefic anhydride to hydrocarbons
below the ceiling temperature[J] , Journal of Polymer Science：
PartA：Polymer Chemistry,1995, 33(3):555-561
[26] Zhu Yutian, Zhang Ronghua, Wei Jiang, Grafting of malefic
anhydride onto linear polyethylene：a monte carlo study[J]，Journal
of Polymer Science：Part A：Polymer Chemistry, 2004, 42(22)：
[27] Lusichi J M, B. B., Torres N., Torres N. In situ
compatibilization of HDPE／PETblends[J], Appl. Polym. Sci.,
2001,79(5)：874~878
[28] Ganzeveld K. J., Janssen L.P.B.M, The grafting of maleic
anhydride on high density polyolefin in all extruder[J], Polymer
Technology and Science, 1992, 32(7):467-474
[29] 劉萍,宋國君,用反應擠出法進行ABS接枝馬來酸酐研究【J】,
青島大學學報,2001,16(2):68-71
[30] Hsien-Tang Chiu , Jyh-Horng Wu J Appl Polym Sci 101:
2754-2764, 2006
[31] Hsien-Tang Chiu; Jui-O Cheng; Yu-Chun Tao; You-Chen Lin
Polymer-Plastics Technology and Engineering, 1525-6111,