研究生: |
陳伊誠 Yi-Cheng Chen |
---|---|
論文名稱: |
發展及運用先進規劃排程系統於生產作業之效益分析 Developing and Applying APS System for Efficiency Analysis of a Production System |
指導教授: |
歐陽超
Chao Ou-Yang |
口試委員: |
阮業春
Ye-Chun Juan 王福琨 Fu-Kwun Wang |
學位類別: |
碩士 Master |
系所名稱: |
管理學院 - 工業管理系 Department of Industrial Management |
論文出版年: | 2006 |
畢業學年度: | 94 |
語文別: | 中文 |
論文頁數: | 64 |
中文關鍵詞: | i2廠區規劃系統 、NET 、先進規劃與排程系統 |
外文關鍵詞: | Advanced planning and scheduling system, i2 factory planner system |
相關次數: | 點閱:343 下載:11 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
在資訊科技的不斷進步之下,近年來許多的生產規劃與排程系統軟體廠商紛紛推出有先進規劃與排程系統功能等的套裝軟體,如i2廠區規劃系統軟體讓各企業來使用,使企業能夠提高自身的競爭優勢。
由於生產製造現場充滿了各種的不確定性與變動性,如何準確即時回應顧客訂單的交期,並妥善利用有限的資源,企業除了運用現有的企業資源規劃系統之外,還必須結合先進規劃與排程系統,在考量企業資源的限制下,提供可行的物料需求規劃與生產排程計畫,以滿足顧客需求及面對競爭激烈的市場。
有鑑與此,本研究將針對中科機械總廠生產機台產能規劃方面的問題(例如機台資源產能的利用並無法有效的掌握瞭解),利用i2廠區規劃系統的概念,提出先進規劃與排程的物料規劃與產能規劃兩個模型。先對工廠的訂單做生產物料的規劃與安排,接著再針對資源產能超出負荷的機台,運用平衡堆疊的方法來調整超出的產能負荷。
最後本研究將提出的物料規劃與產能規劃模型,運用.NET的系統架構發產出一個生產規劃系統,讓中科機械總廠能夠進行顧客訂單的規劃、機台產能的平衡功能,來得到規劃人員所需的資料,作為支援決策的參考。
Machine capacity is an important factor for Manufacturing. If an order wanted to be fulfilled on time, capacity had to be satisfied. However, demand and forecast varies all of the time. Capacity and load need to calculate frequently for making right decisions. Therefore, one of the major issues addressed on this research was to develop a planning system to properly distribute the resource loading and calculate the capacity utilization rates.
This research was focused on developing a production planning and scheduling system. By applying the concepts from i2 factory planner, this system can be used to analyze the machine loading based on input orders. The analyzed results can be used to support the decision making process carried out by production managers.
中文參考文獻
【1】 王立志(民88)。系統化運籌與供應鏈管理。滄海書局。
【2】 王立志(民92)。供應鍊實戰手冊:應用APS跨越MRP鴻溝-首部曲:物料規劃。鼎誠資訊。
【3】 高德拉特(Eliy M. Goldratt), 斯拉根海默(Eli Schragenheim), 柏德克(Carol A. Ptak)(民91)。仍然不足夠(Necessary But Not Sufficient)(羅嘉穎譯)。天下文化。
【4】 梁慧如(民93)。發展產能堆疊規劃系統以支援緊急插單之影響分析。國立台灣科技大學工業管理系,碩士論文。
【5】 鄧雅元(民89)。先進規劃與排程系統分析。國立台灣大學工業工程學研究所,碩士論文。
【6】 賴穎傑(民92)。多階多廠區生產規劃-以TFT-LCD產業為例。私立東海大學工業工程學系,碩士論文。
英文參考文獻
【7】 Brian Drabble. (1998). Modern Planning and Scheduling Technologies. Computing & Control Engineering Journal.
【8】 Daniele Vergani. (2002). Carraro Optimizes it’s Value Chain with DB2 and i2. IBM Corporation Silicon Valley laboratory USA.
【9】 Dell. (2002). Dell: Buliding a World-Class Supply Chain Solution. i2 Technologies, Inc. and Intel Corporation.
【10】 Gunther kruse. (1999). Advanced Planning & Scheduling-Today’s Hot Topic in Manufactruing System. Supply Chain Analytics Limited.
【11】 i2. (2001). i2 TradeMatrix Factory Planner Manual. i2 Technologies, Inc.
【12】 i2. (2004). i2 Master Scheduler. i2 Technologies, Inc.
【13】 i2.(2001). SCM Factory Planner (Discrete Fdition) Technical ILT.i2 Technologies, Inc.
【14】 Jim Errington. (1997). Advanced Planning & Scheduling (APS):a powerful emerging technology. The institution of Electrical Engineers. UK.
【15】 Kenneth Musselman, Jean O’Reilly, Steven Duket.(2002). The Role of Simulation in Advanced Planning and Scheduling.Frontstep, Inc. 1305 Cumberland Avenue Weast Lafayette, In 47996, USA.